SpeedStrap 1.5" Tire Bonnet Tie-Down for 26"–36" Tires — Steel Ratchet, 4,000 lb MRC

If you haul off-road vehicles, beadlock wheels, or larger tires, a tire-mounted bonnet keeps the wheel anchored without stressing suspension links or bumpers. The SpeedStrap bonnet is built from 1.5" heavy webbing with a steel ratchet, sized slots that adapt to a broad tire range, and a long front strap to reach most trailer anchors — all rated for demanding hauls and race-day swaps.

How does a tire-mounted bonnet protect my vehicle during transport?

Unlike frame or bumper tie-downs, a bonnet wraps over the tire and pulls directly on the wheel, so the vehicle stays settled on the trailer while still moving naturally on its suspension. This reduces frame lift, steering wheel turn, and stress on axles during transport.

• Anchors to the wheel, not the chassis.
• Prevents vehicle pitching and axle bind on rough roads.
• Barrel end caps cushion contact with the wheel finish.

Will this bonnet fit my tires and trailer anchor points?

The SpeedStrap bonnet adjusts to fit tires from 26" to 36" using three size-specific slots on the top strap. The front strap is extra long and fully adjustable, so it reaches varied trailer anchors without adapters.

• Top strap slots contour to 26"–36" wheels, including beadlock rims.
• Front strap length accommodates common trailer anchor locations.
• No extra hardware required — clips attach directly to D-rings or anchor points.

How strong and durable is the SpeedStrap bonnet?

Every bonnet uses 1.5" premium webbing with a steel ratchet and reinforced connections. It carries a minimum rupture capacity (MRC) of 4,000 lbs and a working load limit (WLL) of 1,300 lbs, built to handle competitive and heavy-hauling conditions.

• 1.5" webbing rated for heavy loads and abrasion resistance.
• Steel ratchet mechanism for secure, repeatable tensioning.
• Barrel end caps protect wheel finish during tightening.

How fast is setup and what is the basic procedure?

SpeedStrap designed the bonnet for quick, tool-free installation so you can load and go. Installation takes only a few steps and can be done by one person in under a minute once you know the process.

• Loop the bonnet over the tire and seat it on the tread face.
• Feed the top strap through the slot matching your tire diameter and seat it snug.
• Clip the front strap to your trailer anchor, then ratchet down to the desired tension.

Who this is for: Riders, racers, and pro haulers who transport UTVs, ATVs, SxS, or vehicles with beadlock wheels and oversized tires will get the most benefit. If you need a fast, repeatable tie-down that reduces stress on suspension and chassis and works with varied trailer anchors, SpeedStrap's 1.5" Tire Bonnet Tie-Down is a practical, heavy-duty choice.