SPTA 6" Buffing Polishing Pad Kit — 5 Grit Foam Pads (T120–T10) for DA/Rotary Polishers, Hook-and-Loop 6" Backing

SPTA 6-inch buffing polishing pad kit is a five-grit, hook-and-loop foam pad set designed to compound, polish and finish paint using dual-action, rotary or random orbital polishers.

This kit includes five foam pad grades (T120 heavy-cut, T80 high-cut, T60 moderate-cut, T40 medium-cut and T10 ultra-fine) sized to work with 6" backing plates and engineered to remove sanding marks, oxidation and swirls while producing a high-gloss finish. Each pad features a slightly larger front diameter and a 6" hook-and-loop backing to reduce edge contact and protect panels; the open-cell foam construction improves airflow, heat dissipation and compound retention so you can work longer with fewer pad changes.

Which pad should I use for heavy defects and sanding marks?

For deep scratches, heavy oxidation or 1200–1500 grit sanding marks, choose the T120 heavy-cut (green). It’s built for aggressive material removal and pairs well with heavy-cut polishing compound and rotary tools for fast correction.

• T120 green heavy-cut: removes deep scratches, overspray and orange peel
• Best used with heavy-cut compound and a rotary or aggressive DA setting
• Designed to lock compound and dissipate heat during extended use

How do I progress through the pads to get a swirl-free shine?

Start with the most aggressive pad needed (T120 or T80) to eliminate defects, then step down to T60 or T40 for refining, and finish with T10 for gloss and swirl removal. Each stage removes the micro-scratches left by the previous pad and improves clarity when matched with the correct compound.

• T80 yellow for high-cut correction and heavy swirl reduction
• T60 blue and T40 orange for mid- and fine-stage refinement
• T10 red ultra-fine for final finishing and maximum gloss

Will these pads work on my DA, RO or rotary polisher?

Yes — the pads are compatible with dual-action (DA), rotary (RO) and random orbital (RO) polishers as well as pneumatic tools and random orbital sanders that accept a 6" hook-and-loop disc. Their construction tolerates high shear forces without falling apart.

• Hook-and-loop backing fits 6" backing plates (150mm)
• Durable open-cell foam resists tearing under DA/RO/rotary use
• Washable and reusable for multiple jobs when cleaned and dried properly

How do I care for the pads to extend their life?

Rinse each pad under clean water after use and let it air dry; occasional cleaning with a pad brush removes embedded compound. Proper cleaning preserves foam structure, maintains compound retention and helps pads last for several car-detailing sessions.

• Use water and a soft pad-cleaning brush or SPTA pad conditioner brush
• Air dry naturally; avoid direct heat or machine drying
• Store flat to keep hook-and-loop backing and foam shape intact

Who is this for? Detailers, hobbyists and professional automotive restorers who want a complete, stepwise buffing system for paint correction and finishing will find this SPTA kit useful. It suits users who need a versatile set that handles aggressive compounding through final finishing, works across multiple polisher types, and offers washable, reusable pads that balance cutting power with gloss retention. If you want an affordable, multi-grit foam pad stack engineered for heat dissipation, compound lock-in and consistent results, this SPTA 6" polishing pad set is built to cover the full correction-to-finish workflow.