Taukealugs 90° Silicone Elbow Coupler for Turbo & Intake – 2.0" (51mm) ID, 4-Ply Reinforced, 5mm Wall

This silicone 90-degree elbow from Taukealugs is engineered for joining turbo and intake piping where a compact, flexible, and heat-resistant connection is required. The hose uses a 4-ply silicone construction with a 5mm wall thickness and comes with two T-bolt clamps for secure installation. It suits aftermarket intercooler, turbo, or intake setups and withstands extreme temperatures and pressures encountered in automotive applications.

What are the key dimensions and build features?

The elbow has a 2.0" (51mm) inner diameter, one leg length of 120mm, and a 5mm wall thickness. Its 4-ply silicone construction balances flexibility with reinforcement for longer service life.

• Inner diameter: 2.0" (51mm)
• Leg length: 120mm on one side
• Wall thickness: 5mm
• Construction: 4-ply reinforced silicone

How does it hold up to heat and pressure?

The silicone compound and reinforced plies provide broad thermal tolerance and reliable pressure performance for forced-induction and high-heat environments. This makes it suitable for plumbing between turbos, intercoolers, and throttle bodies within the stated limits.

• Temperature range: -60°C (-76°F) to 230°C (446°F)
• Bursting pressure: rated at 2 MPa (approx. 290 psi)
• Reinforced layers resist collapse and deformation under boost

What comes in the package and how easy is installation?

Each elbow ships with two T-bolt clamps sized for a tight, clamp-down connection that resists blow-off under pressure. The 90° angle and moderate leg length simplify routing in tight engine bays compared with rigid piping.

• Included: 1 x 90° silicone elbow (2.0" ID) and 2 x T-bolt clamps
• Installation: slide onto pipe ends and tighten clamps for a secure seal
• Compatibility: works with most 2.0" intake and turbo piping systems

Will this fit my vehicle or turbo setup?

The elbow is a universal-style coupler designed to join 2.0" diameter tubing at a right angle. Confirm your pipe outer diameter and desired routing before purchase to ensure a proper match.

• Best for 2.0" ID piping, intercooler and turbo plumbing
• Check pipe OD and flange clearances before installing
• Not pre-formed for specific vehicle models—designed for universal retrofit use

This Taukealugs 90° silicone elbow is intended for automotive and performance plumbing where a heat-resistant, reinforced connection is required. It fits builders, tuners, and mechanics who need a reliable 2.0" coupler for turbo, intercooler, or intake systems and prefer stainless T-bolt clamps for stronger sealing force. If you need a different bend radius, ID, or leg lengths, look through Taukealugs' range of silicone couplers to match your system precisely.