TERA PUMP 2nd Gen Gas Can Fuel Transfer Pump — Auto-Stop Nozzle, 2.4 GPM, 39.4" Hose

The TERA PUMP 2nd Gen Gas Can Fuel Transfer Pump is a battery-powered, auto-stop transfer pump that quickly moves gasoline, diesel, kerosene and light fuels at 2.4 gallons per minute with a universal adapter and redesigned nozzle.

Designed for homeowners, landscapers, boaters and emergency use, this updated TRFA-XL pump simplifies moving liquids without lifting heavy cans or dealing with slow siphons. The 2025 upgrades include a longer 39.4-inch vinyl discharge hose, a metal impeller cover for debris protection, and an ergonomic pump nozzle with an auto-stop sensor that prevents overfilling. Powered by four AA alkaline batteries (or two in emergency mode), it delivers fast, tool-free transfers for a wide range of fuels and light liquids.

How fast will this pump refill my container?

The TERA PUMP transfers at approximately 2.4 gallons per minute (about 11 liters per minute). That speed means a typical 5-gallon gas can empties in roughly two minutes, letting you refuel equipment and vehicles quickly without long waits.

• Flow rate: 2.4 gallons (11 L) per minute
• Empty a 5-gallon can in ~2 minutes
• Suitable for cars, motorcycles, boats, mowers and light equipment

What safety and convenience features stop spills and protect the pump?

The pump uses an internal sensor inside the discharge nozzle to auto-stop when the receiving tank is full, reducing spills and mess. The upgraded metal impeller cover helps keep debris out of the internal components, while the vinyl discharge hose resists nicks and abrasions for more reliable service.

• Auto-stop overfill sensor in the nozzle
• Metal impeller cover for debris protection
• 39.4-inch vinyl discharge hose resists cuts and abrasions

Which liquids can I safely move with this transfer pump?

The TERA PUMP is intended for a broad range of fuels and light liquids: gasoline (including E15), diesel, kerosene, light oils and water (not for drinking). It works with racing fuels and commonly used automotive fuels, but note that highly corrosive fuels like E85 can degrade seals over time and should be removed from the pump after use.

• Compatible: gasoline, diesel, kerosene, light oils, water (not potable)
• Works with E15 and many racing fuels; remove pump after E85 use
• Not recommended for strong solvents or highly corrosive chemicals

How is the pump powered and how long will batteries last?

No built-in rechargeable battery means you avoid charging cables and capacity loss over time. The unit runs on four AA alkaline batteries for full performance and can operate on two batteries in emergency mode with reduced runtime; typical battery sets can pump up to approximately 250 gallons (50 × 5-gallon cans) per full four-battery set.

• Power: 4 × AA alkaline batteries (or 2× for emergency mode)
• Estimated capacity: up to ~250 gallons per full battery set
• Simple swap-and-go battery design — no chargers required

Who is this for? The TERA PUMP 2nd Gen is aimed at anyone who needs fast, spill-reduced liquid transfers without heavy lifting or complex installation: homeowners topping up mowers, boat owners refueling quickly, farms and small fleets servicing equipment, and emergency tool kits that require a dependable, portable pump. Its universal adapter, ergonomic nozzle and protective upgrades make it a practical choice for repeated use across vehicles and outdoor equipment where safe, controlled fuel transfer matters.