USC Polyester Finishing Putty 24 oz Icing — Pourable Glazing & Easy-Sanding Filler

USC 26006 Icing is a 24 oz pourable and brushable polyester finishing putty formulated for glazing, filling, and producing ultra-smooth surfaces ready for sanding and topcoat.

This polyester finishing putty comes in a convenient 24-ounce tube designed for precise application where a thin, uniform glaze or filler is required. The creamy, non-tacky formula spreads easily by brush or pour, adheres well to prepared substrates, resists staining, and sands to a smooth finish quickly—making it practical for bodywork, trim repair, and fine-surface preparation before primers or paints.

How do I apply USC 26006 Icing for best results?

Apply to clean, dry, and properly prepared surfaces. The product can be poured or brushed into low spots, seams, or texture irregularities; allow proper cure before sanding and follow standard polyester putty handling for catalyst ratios and ventilation.

• Clean substrate of grease, loose paint, or contamination.
• Mix with recommended catalyst per manufacturer guidance.
• Pour or brush thin coats for glazing or thicker passes for filling.
• Allow full cure, then sand with progressively finer grits.

What surfaces and projects is this finishing putty suitable for?

USC 26006 works on metal, fiberglass, and properly prepared painted substrates where a fine finish is needed. It’s ideal for automotive body glazing, marine touch-ups, furniture trim repairs, and other applications requiring a smooth top layer prior to primer or topcoat.

• Automotive small-dent glazing and edge blending.
• Fiberglass boat repairs and gelcoat finishing.
• Wood trim or furniture surface leveling before painting.
• Any project needing a stain-free, non-tacky finishing layer.

How does USC 26006 perform during sanding and finishing?

The formulation is exceptionally easy to sand and produces a uniform surface without gumming sandpaper. Because it cures to a non-tacky, stain-free film, sanding yields predictable, controllable results that accept primer and topcoat evenly.

• Sands smoothly with standard bodywork grits—no excessive clogging.
• Leaves a consistent surface profile for primer adhesion.
• Non-staining characteristics preserve surrounding substrates.
• Designed to minimize dust that binds to the putty during sanding.

Who is this for? USC 26006 Icing 24 oz finishing putty suits professional technicians, hobbyists, and DIYers who need a high-quality glazing and finishing filler that spreads easily, sands cleanly, and produces a fine surface ready for primer and paint. It’s especially useful for automotive and marine refinishing specialists, furniture restorers, and anyone wanting dependable adhesion and a smooth final appearance. Packaged in a 24-ounce tube and made in the US, it fits workflows that demand controlled application, minimal mess, and reliable finishing performance.

Features:

• Made in US