VEVOR G80 V Bridle Chain 5/16" x 2' Tow Bridle with J & Grab Hooks — 10,800 lb SWL, Galvanized Grade 80

VEVOR G80 V Bridle Chain is a galvanized Grade 80 tow bridle (5/16" x 2') with heavy-duty J and grab hooks rated for a 10,800 lb safe working load.

Built for recovery, transport and flatbed towing, this VEVOR transport bridle uses Grade 80 alloy steel and a corrosion-resistant galvanized finish to combine high tensile strength with long-term durability. The bridle's compact 2-foot length and robust 5/16" chain diameter make it suitable for connecting winches, shackles, and vehicle anchor points while keeping rigging tidy and secure.

How strong is this V bridle chain and what does the rating mean?

The chain is Grade 80 (G80), engineered for heavy transport and recovery tasks where a high strength-to-weight ratio is needed. The published safe working load of 10,800 lbs reflects the maximum recommended load under proper use and inspection; always follow industry best practices when lifting or towing.

• Grade 80 alloy steel construction for higher tensile strength.
• Safe working load: 10,800 lbs when used according to guidelines.
• Chain diameter: 5/16" for balance of flexibility and strength.
• Galvanized finish reduces corrosion and extends service life.

What hooks and attachments come with the bridle and how do I use them?

This bridle arrives fitted with large J hooks and grab hooks designed for common anchor points on flatbeds, wreckers, and recovery rigs. Hooks are shaped to accept chain links securely; ensure the load sits in the hook bowl (center) rather than on the tip or edge to avoid concentrated stress.

• Includes large J hooks for quick connection to anchor points and lift eyes.
• Grab hooks allow adjustable chain length without additional hardware.
• Galvanized hooks minimize rust and maintain connection integrity.
• Follow the note: do not hang on hook edge, avoid twisting or inverting chain.

Is this bridle chain suitable for my flatbed truck or recovery vehicle?

The VEVOR G80 bridle is sized and rated for medium- to heavy-duty towing and recovery operations commonly performed by flatbed and wrecker services. Its short 2' span helps keep rigging compact on a deck while still providing sufficient reach to connect to lift points and shackles.

• 2-foot length fits neatly on flatbeds and recovery decks without excess slack.
• Universal hook shapes work with common vehicle anchor points and shackles.
• Galvanized finish resists road salt and weather during regular use.
• Works well as a primary bridle or as a backup strap in towing setups.

How should I inspect and maintain the chain to stay safe?

Regular inspection and correct handling preserve the bridle's working load and lifespan. Check for worn links, bent or cracked hooks, corrosion at weld points, and ensure hooks seat loads properly; remove the bridle from service if any damage is found.

• Inspect links and hooks before each use for deformation or cracks.
• Keep the galvanized finish clean; store dry when possible to slow corrosion.
• Never twist, invert, or tie the chain; hang loads in the center of hook bowls.
• Replace the bridle if any visible fatigue, elongation, or weld damage appears.

Who is this for: professional tow operators, flatbed haulers, roadside recovery services and fleet managers who need a compact, high-strength bridle for regular towing and winch work. If you require a corrosion-resistant, Grade 80 chain assembly with versatile hooks and a 10,800 lb safe working load, this VEVOR V bridle is designed to meet those needs while fitting neatly on service vehicles and in equipment lockers.