Xuhal 50W 6Ω LED Load Resistor Kit — 60-Piece Gold Set with T-Tap Connectors, Stops Hyper-Flashing

Xuhal 50W 6Ω LED load resistors are a 60-piece kit (20 resistors + 40 T-tap connectors) that stabilize LED turn signals by simulating incandescent load to stop hyper-flashing and error messages.

This kit supplies high-power, alloy-bodied resistors engineered for after-market LED turn-signal and marker light installations. Each resistor is rated 50 watts and 6 ohms, intended to be wired in parallel with LED bulbs to add the necessary electrical load that many vehicle systems expect. The set is gold-toned and includes two T-tap wire connectors per resistor to simplify splicing into factory wiring without cutting harnesses.

How do these resistors fix hyper-flashing and dashboard errors?

LED bulbs draw far less current than incandescent bulbs, which can make the vehicle think a bulb is out and cause the flasher relay to operate too fast. Installing a 50W 6Ω resistor in parallel with each LED simulates the original bulb load, slowing the flash rate and clearing the error indicators. These resistors are typically used one per LED bulb or as specified by your vehicle’s wiring setup.

• Adds electrical load equivalent to incandescent bulbs to normalize flash rate
• Clears many error codes and warning lights tied to bulb load
• Used in parallel across the positive and ground of the LED circuit
• Includes T-tap connectors to avoid cutting factory wires

How do I install a Xuhal 50W 6Ω resistor safely?

Installation requires connecting one resistor terminal to the switched positive turn-signal wire and the other to a reliable ground. Because these resistors dissipate heat like a bulb, they must be mounted securely to a metal surface away from plastic, rubber hoses, and painted areas to prevent melting or damage. For each LED bulb you install, follow the vehicle-specific wiring plan to determine whether one resistor per bulb or one per circuit is needed.

• Attach one lead to the positive (switched) turn-signal wire
• Attach the other lead to a good chassis ground
• Fasten resistor to metal for heat sinking and safety
• Use the included T-tap connectors for non-destructive splicing

What are the physical and electrical specifications of this kit?

The kit contains twenty 50W, 6Ω resistors and forty T-tap connectors, all made from durable alloy materials with a gold finish. Each resistor is engineered to handle the thermal load generated during normal turn-signal operation, though they will become hot and must be mounted to a metal surface for heat dissipation. Sizes and exact dimensions are provided in product images and may vary slightly due to manual measurement.

• 20 resistors rated 50 watts, 6 ohms each
• 40 T-tap wire connectors included for clean installs
• Alloy construction for durability and heat resistance
• Gold-tone finish; minor size/color differences possible

Are there any safety or compatibility notes I should know?

These resistors reach high temperatures during use, so secure mounting to metal is required to avoid melting nearby components. They are broadly compatible with most 12V automotive LED turn signals, parking lights, and marker lights, but always verify your vehicle’s electrical needs before installation. Keep small parts away from children, and consult a professional if you are unsure about wiring.

• Mount on metal surfaces; avoid plastic and painted panels
• Not intended for direct contact with flammable materials
• Confirm 12V system compatibility and per-bulb requirements
• Follow local electrical and vehicle safety guidelines

Who this is for: The Xuhal 50W 6Ω LED Load Resistors kit is designed for DIY vehicle enthusiasts, auto electricians, and installers fitting LED turn signals, parking lights, or marker lights who need a reliable, high-power solution to stop hyper-flashing and dashboard errors. It’s also suited for shops and fleet technicians who want a bulk, ready-to-install supply with T-tap connectors for non-destructive wiring.