Ziomitus 1141/1156 LED Bulbs 10-Pack BA15S 6000K 330lm — Bright Interior & Backup Replacements

Ziomitus 10Pack 1141/1156 LED bulbs are compact, high‑output 6000K replacements designed for interior, backup, and auxiliary lighting across cars, RVs, trailers and boats.

These single‑contact BA15S LED replacements deliver bright white illumination in a small, 0.66 x 1.52 inch package and run on a wide voltage range (AC 10–24V / DC 10–30V). Each lamp draws 3W and produces roughly 330 lumens, making them an efficient swap for older incandescent 1141/1156 style bulbs. Built with quality LED chips, a dedicated driver and heat‑dissipation design, the set of ten is intended to last tens of thousands of hours in common vehicle and marine fixtures.

How bright are these Ziomitus LED 1141/1156 bulbs and what color do they produce?

These LEDs emit a daylight‑white 6000K tone that reads neutral to slightly cool, improving visibility and modernizing the look of existing lighting. At about 330 lumens per bulb, they are significantly brighter than typical stock incandescent lamps while remaining energy efficient.

• Color temperature: 6000K daylight white for clearer visibility.
• Output: ~330 lumens per bulb, suitable for backup and interior use.
• Power consumption: 3W each, reducing electrical draw compared with incandescent bulbs.

Will these bulbs fit my vehicle, RV, or boat socket?

These lamps use a single bayonet contact base (BA15S / P21W) and are compatible with many 1141/1156 style sockets. They are listed as fitting numerous equivalent part numbers and common bayonet fixtures found in automotive and marine applications, but you should confirm your fixture uses BA15S (not BA15D/BAY15D) before installing.

• Base type: BA15S (single contact bayonet) — check your socket style first.
• Common cross references: 1156, 1003, 7506 and many equivalent codes for interior and backup lights.
• Physical size: 0.66 x 1.52 inch — compact to fit tight housings.

Can I use these LEDs for turn signals or other load‑sensitive circuits?

When replacing incandescent bulbs in flasher or computer‑monitored circuits (turn signals or some brake lights), LED low load characteristics can trigger hyper‑flash or error codes. Installing a suitable load resistor (for example, a 50W resistor as commonly recommended) or an LED‑compatible flasher module prevents these issues in most vehicles.

• Turn signal use: may require a load resistor to avoid hyper‑flash.
• Error codes: add load correction for vehicles with bulb monitoring systems.
• Consult vehicle manual or a technician if unsure about required resistors or modules.

How durable are these Ziomitus LED bulbs and what are the electrical specs?

These LEDs are engineered for extended service life with quality chips and improved heat management, offering long operational hours compared with incandescent counterparts. They operate across a broad voltage window suitable for many 12V and 24V systems and are designed for automotive and marine environments.

• Voltage range: AC 10–24V and DC 10–30V compatible with common vehicle systems.
• Power and luminous output: 3W, approximately 330 lumens each.
• Longevity: designed for 30,000+ hours with proper installation and use.

Who is this for? This 10‑pack from Ziomitus is intended for vehicle owners, RV and boat owners, and DIY mechanics who want a brighter, energy‑efficient replacement for 1141/1156 style bulbs. It suits anyone upgrading interior, backup, trunk, or auxiliary exterior lights who needs BA15S compatibility and a neutral daylight color. If your vehicle uses monitored circuits or turn signals, budget for a load resistor or LED flasher to ensure fault‑free operation.