A/C Tools & Equipment

The VIVOHOME HVAC Refrigerant Freon Leak Detector is a handheld gas leak finder that locates halogenated refrigerant leaks quickly using adjustable sensitivity, a flexible probe, and dual white/UV LEDs. Designed for technicians and DIYers, this compact detector helps pinpoint leaks in automotive air conditioning,...

Boltigen Refrigerator Freon Recharge Hose Kit is a ready-to-use charging set that lets you access and refill R134a, R12, R22 and similar refrigerants safely with two BPV31 bullet piercing valves and an R134a self-sealing adapter. This compact kit includes all the fittings and a...

Leak Saver Leak Shot refrigerant-grade CO2 refill cartridges are an 8-pack of high-pressure CO2 designed to refill the Leak Shot HVAC tool so you can clear condensate drains and support direct-inject leak-sealing work on A/C and refrigeration systems. These cartridges were engineered by HVAC...

SURIEEN HVAC Hoses with Ball Valves are a three-piece set of 1/4" SAE refrigerant charging hoses built for R134a, R410a, R22 and R12 systems, offering 3000 psi burst strength and easy one-hand control via color-coded manual shut-off valves. These charging hoses combine reinforced rubber...

CAI - YELLOW JACKET Hose Depressors PK10 are small replacement clips that keep 1/4" refrigeration hoses securely depressed and routed to prevent kinks, snagging, and interference during service or installation. When working on refrigeration systems, neat hose routing and prevention of hose pop-up at...

SHUJUKU Gauge Boots Cover & 49100 Gauge Lens is a protective kit that fits Ye-llow Jacket 3-1/8" HVAC gauges to shield dials from impacts, restore clear lens visibility, and extend manifold service life. Keep your TITAN and BRUTE II manifolds looking and performing like...

VOTNMIC 134PCS Car Air Conditioning Valve Core Accessories Kit is a complete set of valve cores, seals, and tools designed to service and replace A/C Schrader valve cores for R12, R22 and R134a systems. This comprehensive kit gathers the most commonly needed valve cores...

FANOVO R134a Refrigerator Freon Recharge Kit is a compact charging set that lets you top up home fridge and A/C refrigerant lines using puncture cans or self-sealing cans with a built-in pressure gauge. This kit bundles a color-coded R134a refrigerant hose with an easy-to-read...

The AUGREX BPV-31 10-set bullet piercing tap kit gives technicians a durable, leak-resistant way to tap 1/4, 5/16 and 3/8 inch refrigeration lines quickly and reliably. When you need to add a service port or connect gauges to a refrigeration or air-conditioning line without...

LYNCSEDAR's 11-piece swage and flare drill bit set is a compact HVAC tool kit that expands and flares soft copper, aluminum and brass tubing for reliable butt joints and 45° flares using any standard 1/4" hex-shank drill. This combo pack pairs six swaging bits...

FANOVO 20-pack HVAC service access valves are 1/4" SAE x 1/4" OD copper charge/discharge fittings designed for refrigerant service and field repairs. These heavy-duty access valves give HVAC technicians and maintenance teams a ready supply of reliable fittings for charging, evacuating, and testing refrigeration...

Aracey's 112-piece valve core kit supplies a full assortment of Teflon-sealed Schrader cores and two dual-head removal tools to service R12 and R134a car and home A/C valves quickly and reliably. This kit groups every common valve core size and color used across passenger...

MOTOCOCHE AC Flush Kit is a stainless-steel pressurized canister system with a gauge, adjustable relief valve, spray head and hose designed to safely flush contaminants from automotive and HVAC refrigerant lines. This kit packages durable hardware and simple controls so technicians and DIYers can...

Boltigen R1234yf to R134a Adapter kit converts existing R134a quick-connect hoses and gauges to work with R1234yf systems quickly and securely. This conversion fitting set from Boltigen lets technicians and DIYers adapt R134a charging lines and manifold gauges for R1234yf refrigerant without replacing hoses....

Compact 1/4" SAE low-loss ball valves from Aupoko provide one-handed shut-off and leak-resistant connections for refrigerant charging hoses. These Aupoko ball valves screw onto standard 1/4" SAE charging hose ends to give technicians quick control over refrigerant flow during charging, recovery, or service. Built...

KAISAL AC Flush Kit is a complete, pressure-regulated canister system for safely flushing and cleaning air-conditioning pipes, condensers and evaporators before compressor replacement or system servicing. Designed for technicians and DIYers, this kit combines a reinforced stainless-steel reservoir, a readable pressure gauge, an adjustable...

Hoypeyfiy R134A Valve Core Quick Remover Installer is a two-coupler kit with detachable valve core remover and extra cores designed to extract and install refrigerant valve cores without significant refrigerant loss. This compact kit brings a simple, quarter-turn stainless steel ball valve design and...

Aupoko R134A Recharge Hose Kit is a 59-inch refrigerant charging set with gauge, can tap, quick coupler, and adapter for refilling automotive and mini-split air-conditioning systems. This compact kit bundles the fittings and measurement tools needed to add R134A refrigerant safely and accurately to...

The Mtsooning R134A Refrigerant AC Valve Core Remover Installer Tool Set is a complete high- and low-pressure kit designed to remove and install R134A valve cores quickly while minimizing refrigerant loss. Whether you service a single vehicle or maintain a small fleet, this kit...

SURIEEN's 51-inch R134a AC refrigerant recharge hose with built-in gauge and universal can tap lets you access, monitor, and refill R134a vehicle air conditioning systems safely and accurately. This professional-grade charging hose kit is built for DIYers and technicians who need a durable, easy-to-read...

Mtsooning R1234yf to R134a Adapter Kit is a complete, self-sealing quick-coupler set that converts R1234yf service ports to accept R134a hoses and tools without refrigerant loss. This adapter kit lets technicians and DIYers bridge the compatibility gap between newer R1234yf systems and legacy R134a...

Aupoko's 3-piece refrigerant charging hose and ball-valve kit is a color-coded, 1/4" SAE threaded set built for safe, one-handed control when charging or servicing R134A, R410A, R22 and R12 systems. This Aupoko kit groups red, blue and yellow high-pressure hoses with integrated brass ball...

Yaocom R12 to R134A Conversion Kit is a complete set of brass and aluminum adapters and tools that lets you retrofit R12 service ports to accept R134A quick-disconnect hoses safely and efficiently. This adapter kit contains the essential fittings needed when converting older automotive...

Aupoko's three-piece color-coded refrigerant charging hose set includes red, blue and yellow 1/4" SAE hoses with integrated brass quarter-turn ball valves for reliable AC and refrigeration charging and maintenance. These Aupoko charging hoses are built for HVAC and refrigeration technicians who need a compact,...

QWORK Recharge Kit is a complete AC refrigerant charging set that includes two 59" rubber hoses, a low-pressure manifold gauge, and adapters compatible with R410a, R22, and R134a systems. If you need a compact, ready-to-use kit for topping up or testing air conditioning systems,...

RALBIL AC Flush Kit is a reusable, portable HVAC flushing system with real-time dual-unit pressure monitoring and safety relief designed to clean automotive and household air conditioning lines. Whether you're preparing to replace a compressor or simply removing debris and oil from AC lines,...

Tujoe's Vacuum-Rated Valve Core Remover Installer Tool and refrigeration wrench set is a complete HVAC service kit for replacing valve cores, working in tight valve locations, and performing basic electrical lead checks on residential and commercial systems. This kit bundles a dual-head valve core...

The Dreyoo Valve Core Removal Tool HVAC is a complete valve-core service kit that removes and installs refrigeration valve cores quickly while minimizing refrigerant loss. If you maintain air conditioning or refrigeration systems, this Dreyoo kit bundles a brass core remover, stainless steel rod,...

Aupoko's R134A car AC refrigerant charge hose is a 59-inch, puncture-type can tap and quick coupler kit with a low-side pressure gauge designed for controlled R134A recharging. This compact recharge assembly combines a 1/2" puncture-style ACME can tap, a push-and-lock quick coupler, and a...

The Wadoy 59" AC Refrigerant Recharge Hose Kit is a complete low-side charging set with a clear gauge, reinforced hoses and adapters for R410A, R134A, R22 and R404A systems. This Wadoy kit combines a large, easy-to-read low-pressure gauge with a 59-inch reinforced charging hose,...

FANOVO Refrigerator Freon Recharge Hose Gauge Kit is a complete refrigerant recharge set with a piercing tap valve, large dual gauges, self-sealing adapter and quick coupler to safely add R134a/R12/R22/R502 to domestic refrigeration and A/C systems. This FANOVO kit bundles the tools you need...

ZPSNDP R410a R22 HVAC Core Removal Tool and Service Wrench Set is a complete brass-and-plastic kit that removes and installs Schrader valve cores quickly without venting refrigerant. This professional-grade kit combines a core removal tool, two refrigeration repair wrenches, a hex drill adapter, built-in...

The Aupoko R134A Valve Core Quick Remover Installer Kit is a compact brass alloy toolset that lets you remove and install high- and low-pressure AC valve cores quickly without evacuating the system. Designed for automotive and small HVAC service tasks, this kit combines dedicated...

gohantee R134A Refrigerant Charge Hose Kit pairs a 19-inch R-134a can tap hose with a BPV31 bullet-piercing tap valve and pressure gauge for safe, accurate refrigerant topping and service. This compact charging kit is built for technicians and DIYers who need a reliable way...

The BACOENG R134a Refrigerant Recharge Kit is a complete DIY solution for topping up and testing automotive and household AC/refrigeration systems using R134a, R-12 or R-22 refrigerants. This compact professional kit puts the essential tools for safe refrigerant recharge into one set: a puncture...

Vocoleca’s 31-piece R134A valve core removal and installer kit is a ready-to-use set that lets you extract and replace AC service port cores quickly and leak-free using dual quick-connect fittings and magnetic retention. This professional-grade kit was designed for technicians and informed DIYers who...

The Vansky 68-LED UV AC Leak Detector Kit is a compact professional flashlight and PPE set that reveals fluorescent dye leaks in vehicle air-conditioning and fluids using a high-intensity ultraviolet beam. Whether you’re a DIY mechanic or a shop technician, locating elusive refrigerant, oil,...

Rogvoc Copper Tubing Repair Tool is a handheld tube rounder plier that restores flattened copper or refrigerant lines back to their original diameter using a multi-size hole and lever design. This compact, aluminum repairer is built for technicians and DIYers who need a fast,...

WESUA's 3/4" garden-pipe AC drain line cleaner is a simple, durable adapter that uses garden-hose water pressure to dislodge condensate line blockages quickly. This compact tool connects a standard 3/4-inch garden hose to your air conditioner condensate drain line so you can flush away...

Yonligonju AC Flush Kit is a complete, reusable canister system designed to safely flush automotive air-conditioning lines and remove refrigerant oil and debris before compressor replacement or system service. When servicing car air-conditioning systems, lingering oil and contaminants in the piping can shorten component...

FlareSeal 3/8" (10-pack) is a clip-on, coated copper gasket engineered to stop flare-fitting leaks on refrigeration, HVAC, mini-split and Schrader valve connections. Designed for technicians and installers who need a quick, reliable repair or preventative seal, this multi-ring copper gasket slips onto 3/8" SAE...

FlareSeal MSP-0610 is a clip-on, coated copper gasket engineered to stop refrigerant leaks at 3/8" liquid and 5/8" suction flare connections on ductless mini-split systems. Flare leaks are a leading cause of refrigerant loss and service callbacks on mini-split systems. The MSP-0610 Mini-Split Pack...

OXDFK's 31-piece R134A valve core quick remover and installer kit is a complete brass-bodied set for removing, installing, and sealing AC valve cores on high- and low-pressure refrigerant ports. This kit assembles everything technicians and DIYers need to service R134A automotive and HVAC service...

The Lichamp LA01 AC Leak Detector Kit is a portable UV inspection set with a 51-LED 395–400 nm flashlight and protective glasses designed to reveal refrigerant, oil dyes, and hidden stains. This compact kit bundles a high-output ultraviolet torch and tinted protective eyewear so...

The Refrigeration Technologies RT100S Big Blu Micro Leak Detector (1 qt Viper) is a non-corrosive, NSF-certified solution designed to locate ultra-small refrigerant leaks down to 0.65 oz/year safely around food and equipment. This leak detector fluid from AMZ-Warehouse combines sensitivity, material compatibility, and food-safe...

The SURIEEN R134A Valve Core Removal Tool set is a compact brass and aluminum kit that lets you remove and install R134A Schrader valve cores quickly on both high- and low-pressure A/C service ports without discharging refrigerant. This complete service set is designed for...

WADEO R134A Valve Core Removal Tool Kit is a compact, quick-connect set designed to remove and install R134a and R12 A/C valve cores without evacuating the system. This kit combines brass quick couplers, an upgraded stainless-steel valve rod and a double-ended removal tool to...

Blueseal R-134a A/C Stop Leak is a zero-polymer, lab-tested leak sealer with built-in UV dye in a 2 oz can designed to permanently seal small refrigerant leaks and condition rubber seals in R-134a automotive systems. When your car’s air conditioning is losing cooling power,...

Mastercool 90935 Alum Bond is an aluminum-filled, high-strength epoxy paste engineered to permanently repair cracks, blow holes, porosity, and casting defects in aluminum radiators, engine components, tanks, and HVAC parts. When replacing an aluminum part isn’t practical or economical, Alum Bond offers a professional...

The Elitech CLD-100 is a compact, professional-grade refrigerant leak detector that quickly senses freon and other halogenated refrigerants in tight HVAC and automotive spaces. Designed as an upgraded successor to the WJL-6000, the CLD-100 combines a traditional corona sensor with refined analogue circuitry to...