Belts, Hoses & Pulleys

The X4XZ 2710900982 air intake hose tube is a direct-fit replacement for 2012–2015 Mercedes‑Benz C250 (W204, M271) that restores proper airflow and fits to OEM specifications. If your C250’s original intake hose is cracked, collapsed or leaking, the engine can run less efficiently and...

MOTOKU Radiator Coolant Inlet and Outlet Hose is a direct-fit replacement hose set designed to restore coolant flow for compatible Jeep Grand Cherokee and Dodge Durango V6 models. This replacement inlet/outlet hose pair restores the connection between the radiator and engine cooling system on...

EVIL ENERGY 10ft push-lock fuel hose kit supplies two SAE 30R7 NBR hoses (3/8" and 5/16") rated for 300 PSI working pressure, built for fuel, oil, and diesel applications. This dual-hose kit gives you ready-to-install, abrasion-resistant and oil-compatible lines for automotive, marine, and equipment...

Performance-grade OEM replacement serpentine belt engineered by Bando USA for long life, heat resistance, and quiet operation. Bando USA 6PK2515 is an OEM-quality serpentine drive belt built to match factory specifications for fit and performance. Made from EPDM compound and precision ground to the...

The A-Premium Serpentine Belt 6-Rib 86.78 In is a replacement EPDM K-section drive belt designed to restore accessory drive performance and reduce noise and wear on compatible V6 and V8 engines. This heavy-duty serpentine belt is engineered to match factory dimensions while leveraging modern...

AUTOKAY 17228-RYE-A10 is a direct-fit replacement air intake hose engineered to restore proper airflow for Acura MDX models from 2010 through 2013. The air intake hose channels fresh air from the intake assembly to the engine; a cracked or collapsed hose can cause poor...

Goodyear Belts 1060700 is a 6-rib, 70-inch serpentine replacement belt engineered to restore reliable accessory drive performance and long service life. When an aged or worn belt causes squeal, slipping, or accessory underperformance, swapping in a correctly sized, high-quality replacement is the quickest way...

TSIEBRV 120PCS Vacuum Line Kit is a complete silicone tubing kit with six 5 ft hose sizes, 64 assorted connectors, and 50 caps for DIY and professional automotive vacuum routing and repairs. This all-in-one kit supplies the most common vacuum hose diameters and a...

NewYall Drive Belt Tensioner is a direct-fit replacement tensioner designed specifically for 3.5L and 3.7L engines used in select Ford, Lincoln, Mazda and Mercury models. If your vehicle uses a 3.5L or 3.7L V6 and the factory belt tensioner is worn, the NewYall replacement...

COOL STAR's HVAC heater hose assembly is a new, direct-replacement rubber hose engineered to restore heater and coolant routing for Dodge Grand Caravan (2011–2019) and Chrysler Town & Country (2011–2016). If your vehicle shows coolant loss, heater performance problems, or visible wear on the...

The A-Premium serpentine belt is a 6-rib, 84.06-inch EPDM replacement designed to restore reliable drive accessory function on select Honda, Acura and some Mercedes models. This belt replaces worn OEM drive belts on a range of V6 engines and is engineered for long life...

The Bando USA 7PK1765 is an OEM-grade 7-rib serpentine belt (1765 mm / 69.5 in) made from heat-resistant EPDM and precision-ground to factory specifications. Bando has produced automotive rubber components for over a century and supplies belts to major automakers worldwide. The 7PK1765 serpentine...

ban.do 6PK2415 is an OEM-grade serpentine belt engineered by Bando USA to match factory specifications for fit, durability, and quiet operation. Bando brings over a century of rubber manufacturing experience to this replacement serpentine belt. Built with EPDM compound, precision-ground ribs, and reinforced tensile...

A ABIGAIL Air Intake Hose is a direct-fit replacement intake duct tube engineered to restore proper air delivery for Nissan Sentra 2.0L models from 2007 through 2012. When the original air intake hose becomes cracked, collapsed, or brittle, engine performance can suffer from uneven...

Gates K070763 is a Micro-V serpentine drive belt engineered to match original-equipment dimensions and materials for dependable accessory drive performance. This belt is a direct-fit replacement designed for passenger cars and light trucks. Manufactured with Gates’ Micro-V construction, it replicates OE geometry and compound...

The Bando USA 6PK2095 is an OEM-quality serpentine belt engineered from EPDM rubber with precision-ground ribs and Run Quiet technology for long-lasting, quiet drive performance. Built by Bando — a century-old rubber specialist that supplies more than 80% of the top-selling vehicles in the...

A matched set of MOCA AUTOPARTS serpentine belts (4PK945 and 6PK1175) engineered to restore reliable accessory drive performance on 2003–2006 Infiniti G35 3.5L engines. If your G35 is due for belt replacement or you want to keep pulleys, alternator, power steering pump and A/C...

AUCERAMIC 3.5L air intake hose tube (part 17228-RGL-A11) replaces the factory intake tube on compatible 2007–2010 Honda Odyssey 3.5L V6 models. This replacement air intake hose is engineered to match OEM fitment for select Honda Odyssey models, providing a durable conduit between the air...

The A-Premium Air Conditioning Serpentine Belt is a 4-rib, 33.57-inch EPDM drive belt engineered to operate the A/C compressor and related accessories on compatible Hyundai and Kia 2.0L models. This replacement serpentine belt is built for vehicles that use a K-section, 4-rib accessory belt...

EVIL ENERGY 3/4" heater hose is a 5-foot EPDM coolant line built to SAE 20R3 standards, rated for 100psi working pressure and suitable for engine cooling, heater cores, and overflow connections. This hose is designed for reliable circulation of coolant, water, and antifreeze in...

Goodyear Belts 1070410 is a 7-rib, 41-inch serpentine replacement belt engineered to match original equipment fit for select BMW 750iL (1995–2001) and BMW 850Ci (1995–1997) models. This serpentine belt is an aftermarket replacement from Goodyear, produced to handle modern engine heat, load, and RPM...

BSNOVT's replacement reservoir water hose restores coolant flow for compatible Land Rover Range Rover and Discovery models without altering factory fit. The BSNOVT radiator coolant reservoir tube is designed as a direct-fit replacement for selected Land Rover vehicles from 2013–2020. Built from durable, heat-resistant...

Gates 21216 is a purpose-built molded coolant hose engineered to replace upper, lower, bypass, and heater hose applications with OEM-quality fit and long-lasting heat and chemical resistance. This molded coolant hose from Gates is designed to match original equipment contours and performance so you...

Goodyear 1040378 is a 4-rib serpentine replacement belt 37.8 inches (960 mm) long designed to restore quiet, reliable accessory-drive performance. This replacement belt is engineered by Goodyear Belts to meet or exceed original equipment specifications for modern engines and heavy-duty machines. Built with heat-...

COOL STAR's 2PCS Heater Hose with Tee is a direct-replacement rubber heater hose assembly designed to restore coolant flow and heater performance on Dodge Journey 2.4L models from 2008–2020. If your Dodge Journey’s cabin heat is weak or you see coolant leakage near the...

A-Premium Stretch Fit Water Pump Serpentine Belt is a 3-rib, 30.35-inch EPDM drive belt designed to replace worn factory belts on select Hyundai and Kia L4 engines. This stretch-fit serpentine belt from A-Premium is engineered for modern accessory-drive systems that require a compact, durable...

The Gates 23183 Premium Molded Coolant Hose is a ready-to-install, OEM-spec replacement hose engineered for reliable coolant routing in upper, lower, bypass and heater applications. Designed and built to meet demanding automotive cooling system needs, this molded hose replaces factory parts without modifying vehicle...

The Bando USA 6PK2225 is an OEM-quality serpentine belt made from EPDM rubber and precision-ground ribs for long life, heat resistance and reliable drive performance. Built by a global manufacturer with over a century of rubber experience, the 6PK2225 serpentine belt is engineered to...

The Bando USA 7PK1550 serpentine belt is an OEM-quality EPDM drive belt engineered to replace original equipment on select Lexus and Toyota models for durable, heat-resistant performance. Bando has more than a century of experience making rubber drive components and supplies belts to many...

The Gates K060975 Micro-V serpentine drive belt is a precision-fit replacement belt engineered to match original equipment dimensions, reduce noise, and resist rib cracking for reliable accessory drive performance. Designed for import and domestic cars and light trucks, the Gates Micro-V line combines OE-compatible...

Goodyear Belts 1070663 is a 7-rib, 66.3-inch serpentine drive belt engineered to replace worn OE belts and restore quiet, reliable accessory drive performance. This serpentine belt from Goodyear is designed for modern engines that demand heat resistance, tensile strength and a precise fit. Manufactured...

ApplianPar 2Pcs Upper and Lower Radiator Coolant Hose set replaces worn or damaged coolant hoses on Chevrolet and GMC 1500, 2500, and 3500 trucks. These two OE-style hoses—one upper and one lower—are designed to restore proper coolant flow between the radiator and engine on...

BSNOVT Radiator Overflow Hose is a direct-fit coolant expansion tank bypass line designed to replace OEM 8W0121081AN on select Audi A4 and A5 models. This replacement coolant hose provides a durable route for excess engine coolant to flow from the cooling system to the...

AUCERAMIC's Engine Air Intake Hose is a direct-fit replacement for the 2.4L Acura TSX (2006–2008), supplied with clamps for a secure, OEM-matching connection. When the factory intake hose becomes worn, cracked, or loose, airflow leaks and drivability issues can follow. This replacement hose is...

The A-Premium Serpentine Belt 6-Rib 39.48 In is a direct-fit, EPDM multi-rib drive belt engineered to replace worn factory belts on compatible Audi, BMW, and Volkswagen 4-cylinder engines. This replacement serpentine belt delivers the belt dimensions and reinforcement required to drive accessories such as...

A-Premium Serpentine Belt 4-Rib 46.5 In is a direct-fit replacement drive belt designed for select Toyota Echo and Yaris models, built from EPDM for improved durability and consistent belt tension. This replacement serpentine belt provides the proper length, rib count, and construction to operate...

Taiss 4PCS Racing Fuel Jug Hoses are a four-piece set of 14‑inch clear fuel filler hoses with built‑in ball valves, a bender, gasket and protective cap designed for fast, controlled refilling from LC2/VP style jugs. These hoses give you visual fuel flow, positive shutoff...

8TEN idler pulley replaces Scag OEM 483415/486045/486045K to restore smooth belt tracking on compatible Scag zero-turn and walk-behind mower decks. If your mower’s belt is slipping, making noise, or tracking poorly, the pulley that guides the drive or deck belt may be worn or...

The Bando USA 6PK1880 is an OEM-grade 6-rib serpentine belt (1880 mm / 74.0 in) engineered for quieter operation, heat resistance, and long service life. Bando has manufactured rubber drive components for over a century and supplies both OEM and aftermarket markets worldwide. This...

The A-Premium 17228-RV0-A00 is a direct-replacement rubber engine air intake hose designed to fit Honda Odyssey V6 3.5L models from 2011–2017, restoring proper air delivery and factory fitment. This high-strength intake hose is engineered to meet original equipment dimensions and performance so you can...

The Fit4drive 17228-5J6-A00 is a direct-fit replacement air intake hose engineered to route filtered air from the air box to the engine for select Acura and Honda models. This replacement intake hose restores the sealed air path between the air cleaner assembly and the...

A ABIGAIL Air Intake Hose is a direct-fit replacement intake duct made from high-temperature rubber for select Nissan and Infiniti models, restoring proper airflow to the engine assembly. This replacement air intake hose fits Nissan Murano (2015–2023), Nissan Pathfinder (2013–2016), Infiniti QX60 (2014–2016) and...

The A ABIGAIL Air Intake Hose is a direct-fit replacement air duct tube engineered to restore proper airflow for Nissan Murano (2009–2013) and Nissan Quest (2011–2017) vehicles. This replacement intake hose is molded from high-temperature rubber and built to withstand heat, vibration, and daily...

EVIL ENERGY 2-pack 10AN 90-degree hose end fittings are lightweight 6061-T6 aluminum swivel adapters built for stainless-steel or nylon braided fuel lines. These right-angle hose ends convert a 7/8-14 UNF threaded inlet to a 10AN (37° flare) hose connection while offering a full 360°...

EVIL ENERGY 12AN straight swivel hose end fitting is a black, 6061-T6 aluminum 2-piece connector designed for stainless or nylon braided CPE hoses, offering a 360° swivel and a reusable 37° AN seal. This pair of 12AN fittings provides a compact, high-strength solution for...

EVIL ENERGY 2PCS 12AN 90 Degree Hose End Fittings are lightweight 6061-T6 aluminum swivel connectors built for CPE braided stainless or nylon fuel hoses. These 12AN 90° hose ends provide a compact, reusable swivel connection for braided fuel lines where a tight routing and...

VINMS 17228-RV0-A00 is a direct-fit replacement engine air intake hose designed to restore proper airflow for 2011–2017 Honda Odyssey models with the 3.5L V6. If your Odyssey shows signs of reduced throttle response, unusual engine noises near the intake, or a cracked/soft air hose...

The VINMS 17228-R42-A00 engine air intake hose is a reinforced rubber replacement tube with clamps that restores proper air delivery for 2008–2012 Honda Accord and 2012–2015 Crosstour 2.4L models. If your Honda is showing signs of reduced engine performance, rough idle, or visible wear...

EVIL ENERGY 1/2" Heater Hose is a 10-foot EPDM coolant hose built to SAE 20R3 specs for reliable 100psi service in engine cooling and heater systems. This heavy-duty heater hose combines EPDM rubber construction with precise dimensional tolerances to connect radiators, heater cores, and...

EVIL ENERGY 3/8" Heater Hose 10FT is a durable EPDM coolant line built to SAE 20R3 standards for radiator, heater, and overflow connections. This 10-foot 3/8" inner-diameter heater hose is designed for vehicle cooling and hot-water heater systems where reliable coolant transfer is required....