Belts, Hoses & Pulleys

Steelsoft 304 stainless-steel worm-drive hose clamps, 5/8"–1-1/16" (16–27mm), deliver a non-perforated, rolled-edge design for secure, hose-friendly sealing. These 25-piece clamps are engineered for heavy-duty general-purpose use where a durable, corrosion-resistant band and reliable tightening matter. Built to SAE J1508 dimensions and made entirely from...

Steelsoft 25-pack stainless-steel worm gear hose clamps deliver secure, non-damaging sealing for 3/4"–1-1/4" (20–32mm) hoses with welded housings and a rolled band edge. These German-style, non-perforated worm drive clamps are designed to hold rubber, silicone and other soft hoses without cutting or extruding the...

These EVIL ENERGY 6AN 45° PTFE hose end fittings are 6061-T6 aluminum swivel connectors designed specifically for PTFE fuel hose, offering a 37° AN seal and a 1500 PSI working rating. Purpose-built for neat, leak-resistant PTFE fuel-line assemblies, this pair of 45° hose ends...

EVIL ENERGY 8AN 45° PTFE hose end fittings are 45-degree, 8AN aluminum connectors designed specifically to join PTFE fuel hose—sold as a two-piece set. This pair of 45° hose end fittings is built for use with PTFE-lined fuel hose, offering a compact angled connection...

EVIL ENERGY 10AN 45° PTFE hose end fittings are 45-degree black aluminum connectors designed specifically for PTFE fuel hose, sold as a 2-piece set for high-pressure applications. These 10AN fittings (thread size 7/8-14UNF) pair with PTFE-lined fuel hose to create a sealed, 37-degree AN...

EVIL ENERGY 8AN straight PTFE hose end fittings are durable aluminum connectors designed specifically to attach 8AN PTFE fuel lines with a 37° sealing angle and 360° swivel for straightforward installation. Built from 6061-T6 aluminum and rated to 1500 PSI, this two-piece set provides...

EVIL ENERGY 10AN 90° PTFE hose end fittings are aluminum 6061-T6 swivel fittings designed for PTFE fuel lines, offering a 37° AN seal, 7/8-14UNF thread size, and a rated 1500 PSI working pressure. This set of two black 90-degree hose ends is made specifically...

EVIL ENERGY's 6AN straight PTFE hose end fitting is a two-piece aluminum 6061-T6 connector designed specifically for PTFE fuel lines, offering a 360° swivel, 37° AN sealing surface, and reliable performance up to 1500 PSI. This pair of straight hose ends is engineered for...

EVIL ENERGY 8AN 90° PTFE hose end fitting is a two-piece, 90-degree aluminum AN connector designed specifically for PTFE fuel hose, featuring a 37° AN seal, 360° swivel, and a 1500 PSI working rating. This two-pack of 8AN 90° hose end fittings from EVIL...

EVIL ENERGY's 6AN 90° PTFE hose end fittings are black anodized, 6AN (9/16-18UNF) aluminum swivel adapters made for PTFE fuel lines and sold as a 2-piece set. These 90-degree hose ends are engineered specifically for PTFE fuel hose use, combining a corrosion-resistant 6061-T6 aluminum...

EVIL ENERGY 5/16" silicone vacuum tubing is a 10-foot, food-grade silicone hose with an 8mm (5/16") inner diameter designed for durable vacuum and boost line use. This high-temperature, flexible silicone tubing combines a thick 3mm wall with wide temperature and pressure ranges to serve...

VINMS 17228-RGL-A11 is a direct-fit replacement air intake hose tube with clamps engineered for 2007–2010 Honda Odyssey DX/EX/LX V6 3.5L models. This replacement intake hose restores proper air routing between the airbox and intake manifold, helping maintain engine performance and throttle response on compatible...

VINMS 17228-5LA-A00 is a direct-fit replacement air intake hose and clamp kit engineered to restore proper air delivery for 2015–2016 Honda CR‑V 2.4L engines. This replacement intake hose assembly is built from reinforced rubber compounds and supplied with matching clamps to replace worn, cracked,...

IHOTDER 70PCS vacuum line kit includes six 4.92 ft high-temperature silicone hoses in six inner diameters plus 64 assorted connectors for fast, leak-resistant vacuum and air routing on cars, boats, and small machines. This complete silicone tubing and connector set is built for multipurpose...

IHOTDER's 94-piece silicone vacuum hose kit supplies six sizes of durable vacuum lines, 64 assorted connectors and 24 clamps for comprehensive automotive vacuum repairs and modifications. Whether you're restoring vacuum circuits, replacing brittle factory lines, or fabricating custom routing for boost, cruise control, or...

A ABIGAIL Air Intake Hose is a direct-fit replacement duct that restores proper airflow to 3.5L V6 Acura TL, TSX and Honda Accord/Crosstour engines from 2008–2014. This replacement air intake hose is crafted from high-temperature rubber and engineered to match the shape and connections...

YGDMD 5Ft ID 1" silicone heater hose is a heavy-duty, cut-to-length radiator hose designed for vehicle water and gas coolant lines with 650 PSI rupture strength and wide temperature resistance. This reinforced silicone hose replaces brittle factory lines with a flexible, heat-resistant alternative built...

Tnisesm 71-piece Vacuum Line Kit delivers six 5-foot silicone vacuum hoses and 65 nylon connectors designed to replace, repair, or reroute vacuum and coolant air lines across a wide range of vehicles and DIY projects. This kit groups flexible, high-temperature reinforced silicone tubing with...

Tnisesm 6.6 FT Vacuum Hose Kit is a set of six reinforced silicone vacuum tubes in different inner diameters designed for automotive, marine and light industrial air or water routing. This kit bundles six lengths of durable silicone vacuum tubing so you can pick...

OURU 20-pack 1/4" fuel line clamps are adjustable 11–13mm stainless steel hose clamps designed to create a tight, corrosion-resistant seal for fuel, air, water and silicone hoses. These compact, screw-tight hose clamps come in a set of 20 and are built from 304 stainless...

OURU 20PCS Fuel Line Clamp pack delivers 304 stainless-steel, adjustable 5/8"–23/32" (16–18mm) hose clamps designed for secure, leak-resistant connections on fuel, water, and air lines. These compact hose clamps come as a set of 20, each built from corrosion-resistant 304 stainless steel with included...

OURU 20-piece 3/8" fuel line clamps are adjustable stainless-steel hose clamps sized for 9/16"–5/8" (14–16mm) fittings, built to resist rust and provide a 360° leak-resistant seal. These compact hose clamps are made from 304 stainless steel and include matching screws and nuts, offering a...

OURU 20-pack adjustable fuel line clamps are 304 stainless-steel mini hose clamps that secure 1/2"–9/16" (13–15mm) hoses with a 360° leak-resistant grip. These compact clamps are made to fasten small-diameter fuel, water, air and silicone hoses where a dependable, corrosion-resistant connection matters. Each kit...

EVIL ENERGY 3/4" silicone heater hose is a 5-foot, SAE 20R3-compliant coolant and heater line built from braided polyester and silicone to resist wide temperature swings and maintain reliable flow in automotive and heating systems. This reinforced silicone hose replaces standard rubber heater lines...

Magimaker BL3Z-18472-B is a direct-fit HVAC heater hose assembly engineered to replace worn or leaking heater lines on Ford F-150 and Lincoln Mark LT models from 2011 to 2014. This Magimaker heater hose assembly delivers a factory-style replacement designed to restore heated-cabin performance and...

The A-Premium Serpentine Belt 6-Rib 54.5 In is a direct-fit EPDM replacement belt engineered for select Buick Encore and Chevrolet Sonic/Trax 1.4L models, providing durable power transfer with reduced noise and improved resistance to oils and heat. Designed as a precise aftermarket replacement, this...

This JUWEVAZU BB5Z-17A605-A washer hose and twin wiper nozzles replace AR3Z-17603-A to restore reliable windshield spray on Ford Explorer models from 2011 to 2015. Designed as a direct-fit replacement, this kit includes one washer hose and two ABS wiper nozzles engineered to match the...

Goodyear 1060640 is a 6-rib, 64-inch serpentine replacement belt engineered to restore drive-system efficiency with OE-level durability and quiet operation. When a worn or damaged serpentine belt starts squealing, slipping, or cracking, swapping it for a properly sized replacement is the fastest way to...

The Dorman 419-610 accessory drive belt tensioner pulley is a direct-fit steel replacement designed to restore proper pulley alignment and tension on compatible vehicles. This tensioner pulley is engineered to match the original equipment fit and function for listed applications. Built from steel and...

Gates 38018 DriveAlign pulley is an OE-style idler/tensioner pulley engineered to restore proper belt alignment and smooth accessory drive operation on passenger cars and light trucks. If your serpentine belt is misaligned, noisy, or you need a direct-fit replacement during maintenance, this DriveAlign unit...

COOL STAR Breather Hoses with PCV Valve is a complete direct-replacement kit designed to restore crankcase ventilation and all related hose connections on compatible Nissan trucks from 2005–2019. This kit contains the primary breather hoses and a PCV valve engineered to match factory routing...

XYWZV Engine Air Intake Hose 16576-3JA0A is a direct-fit replacement air mass meter boot built to restore correct airflow for select Nissan and Infiniti models. This replacement intake hose is engineered to match factory dimensions and mounting points so you can swap it in...

Dorman 96004 Defroster Hose is a 2-1/2-inch diameter, high-strength nitrile rubber blower fan hose designed to restore proper HVAC airflow and resist cracking while remaining easy to install. This durable, flexible HVAC blower hose by Dorman is made for vehicle heating, ventilation and air-conditioning...

The Bando USA 7PK1835 is an OEM-grade, 7-rib poly-V serpentine belt built from EPDM rubber to replace worn drive belts on compatible Honda Accord models. Made by a manufacturer with over a century of rubber expertise and a global footprint, this Bando serpentine belt...

WnSEu’s LS Throttle Body Bypass Hose Kit provides a braided coolant crossover solution that links the throttle-body steam/coolant ports on GM LS engines for improved routing and leak-resistant fittings. This kit supplies the hardware and hose needed to connect the coolant/steam ports on LS-series...

Bando USA 7PK1745 is an OEM-grade 7-rib serpentine belt engineered to match factory fit and durability for select 2010–2011 Honda CR-V engines. Made by Bando, a century-old belt manufacturer that supplies original equipment for many top-selling vehicles, this 7PK1745 belt is built to the...

The Gates 38042 DriveAlign belt drive idler/tensioner pulley is an OE-quality steel and thermoplastic pulley built to replace locked-center tensioning pulleys, automatic belt tensioner pulleys, or idler pulleys with durable, low-noise bearings and corrosion-resistant construction. This DriveAlign pulley is engineered to meet the fit,...

Goodyear Belts 1070874 is a 7-rib, 87.4-inch (2220 mm) serpentine replacement belt engineered to restore reliable accessory drive performance and long service life. If your vehicle’s accessory drive is slipping, making noise, or showing visible wear, this Goodyear serpentine belt provides a factory-style fit...

The Goodyear 1060772 serpentine belt is a 6-rib, 77.2-inch replacement belt engineered to restore reliable accessory drive performance for specified Cadillac and Subaru models. This premium replacement belt from Goodyear is built to match factory fit and function while resisting heat, abrasion, and the...

TUELETFU's fuel filler and vent hose kit replaces worn or leaking hoses on Jeep Wrangler YJ models equipped with the 20‑gallon plastic fuel tank from 1987 through 1995. If your Wrangler YJ has fuel seepage around the fill spout or a cracked vent line,...

Shineyoo Red Vacuum Hose Kit is a complete 6-size silicone vacuum tubing set with 5-foot lengths and 128 color-matched connectors, built for durable automotive and DIY vacuum, air and coolant routing. This kit bundles six inner-diameter silicone hoses (3mm, 4mm, 5mm, 6mm, 8mm, 10mm...

Shineyoo's Vacuum Hose Automotive Kit is a six-size set of blue silicone vacuum lines (5 ft each) with 128 color-matched connectors designed for reliable engine bay and DIY air/water routing. This kit supplies flexible, heat-resistant silicone tubing and a wide assortment of fittings to...

The A-Premium 6-rib serpentine belt (102.4 in) is a heavy-duty EPDM drive belt engineered to replace worn factory belts and restore accessory drive performance on compatible Ford, Lincoln, Mercury, Chevrolet, Jeep and Buick models. When an accessory belt shows glazing, cracking, or squealing, replacing...

CARBBIA Air Intake Hose 17882-20161 is a direct-fit replacement intake duct engineered to restore proper air delivery for Lexus ES300 (2002–2003) and compatible Lexus models listed. If your vehicle shows rough idle, check-engine lights, or you find visible cracks in the factory intake duct,...

A ABIGAIL Air Intake Hose is a direct-fit replacement air intake duct tube engineered to restore proper airflow for 2009–2014 Buick LaCrosse and Regal, and 2010–2014 Chevrolet Malibu models. When an original intake hose becomes brittle, cracked, or collapsed it can allow unmetered air...

Goodyear Belts 1060440 is a 6-rib, 44-inch serpentine replacement belt engineered to restore drive-system efficiency with heat- and abrasion-resistant construction. When a worn or glazed belt causes chirps, slipping accessories, or reduced charging and cooling performance, swapping in a precisely sized replacement belt is...

Goodyear Belts 1060435 is a 6-rib, 43.5-inch serpentine belt engineered as an exact-fit, long-lasting replacement to restore quiet, efficient accessory drive performance. When a worn or damaged serpentine belt causes squealing, reduced accessory operation, or risk of breakdown, installing a correctly sized, high-quality replacement...

QIANQIAN Fuel Jug Cap 3042 paired with the No-Spill Trigger Hose 33320 is a direct-fit replacement kit that seals 5 and 5.5 gallon racing fuel jugs and adds an instant, controllable, spill-resistant fuel delivery valve. Designed for pit crews, racers and off-road enthusiasts, this...

The ban.do 7PK2120 is an OEM-quality EPDM serpentine belt from Bando USA engineered for quiet operation, high heat resistance and long service life. Bando has more than a century of experience producing rubber power-transmission parts and supplies belts to many original equipment manufacturers worldwide....

A ABIGAIL Air Intake Hose is a direct-fit replacement intake duct tube for 1995–2000 Toyota Tacoma V6 3.4L models, engineered from high‑temperature rubber to restore proper airflow and resist cracking. If the factory intake boot on your Tacoma is brittle, torn, or leaking, fitting...