Belts, Hoses & Pulleys

ROADFORMER 2 inch T-bolt hose clamp (55–63mm) is a heavy-duty, 304 stainless steel two-piece clamp set engineered to give uniform, corrosion-resistant sealing for 2" nominal I.D. hoses. These ROADFORMER clamps are built for automotive and industrial hose connections where a strong, even compression is...

The ROADFORMER 3-inch T-bolt hose clamp is a heavy-duty stainless steel clamp designed to securely fasten hoses with an outside diameter between 2.81" and 3.11" (71–79 mm). Built for demanding automotive and industrial connections, this two-pack of ROADFORMER T-bolt clamps combines a 304 stainless...

ROADFORMER 2.5 inch T-bolt hose clamp (2-pack) is a heavy-duty, 304 stainless steel clamp sized for hoses with outer diameters from 2.31" to 2.64" and built for consistent, high-pressure connections. These ROADFORMER clamps are made with a 304 stainless steel band, a 1/4"-28 stainless...

ROADFORMER 2.25 inch T-bolt hose clamps are heavy-duty stainless-steel clamps sized for 2.06"–2.36" (52–60mm) hose O.D., sold as a 2-pack for secure turbo, intercooler, radiator and coolant connections. These T-bolt clamps combine a 304 stainless steel band, a 1/4"-28 stainless bolt, a floating bridge...

EVIL ENERGY 8AN PTFE Fuel Hose is a 3/8" ID, nylon-braided, E85-compatible 5-foot line engineered for high-temperature, high-pressure fuel and fluid routing. This 8AN PTFE hose combines a smooth PTFE inner tube with a rugged nylon braided outer jacket to deliver resistance to aggressive...

Meonum 10FT 1/4" EPDM heater hose is a flexible, cut-to-length coolant line for small-diameter automotive heater and radiator connections that comes with four stainless-style clamps for a secure fit. Designed for vehicles and equipment that require a resilient small-bore coolant line, this 10-foot roll...

The Calvana Fuel Jug Hose 3044 Replacement Kit is a ready-to-install fuel transfer setup that includes two elbow adapters, two 14-inch transparent hoses with integrated filters and ball valves, designed to fit common 3/4" threaded fuel jugs and cans. If you refill small engines,...

Dreyoo’s 25-foot, 5/32" EPDM windshield washer/vacuum hose kit is a complete replacement set compatible with Gates 27042 for reliable washer and vacuum line repairs. If your vehicle’s washer lines or small vacuum hoses are cracked, leaking, or missing fittings, this Dreyoo kit supplies a...

A ABIGAIL Air Intake Hose is a direct-fit replacement intake duct tube designed to restore proper airflow on 2006–2008 Honda Pilot EEX-L, LX, SE-L, EXL and Sport models. If your Pilot is showing rough idling, reduced throttle response, or visible cracks in the original...

EVIL ENERGY's 10AN 180° hose end fitting is a 6061‑T6 aluminum, 10AN (7/8‑14 UNF) 180‑degree swivel connector engineered for stainless steel and nylon braided fuel hoses. This high‑strength hose end fitting combines a low‑profile 180° bend with a 360° swivel to simplify routing in...

EVIL ENERGY's AN10 hose separator clamp is a 4-piece set of 6061-T6 aluminum mounts designed to hold and organize 10AN fuel and fluid lines with a 0.75" (19mm) internal diameter. Keep fuel, oil, brake and coolant lines tidy and secure with a purpose-built clamp...

EVIL ENERGY's AN6 hose separator clamp is a lightweight 6061-T6 aluminum bracket designed to secure and organize 6AN (0.63" / 16mm) fuel, oil, brake or water lines for a neater, safer installation. When routing hydraulic or fuel hoses in a vehicle or custom build,...

EVIL ENERGY 3/8" Heater Hose is a 5‑foot EPDM coolant line built to SAE 20R3 standards for radiator, heater and overflow connections, rated for 100 psi working pressure and wide temperature extremes. This hose is engineered as a direct, flexible solution for heating and...

EVIL ENERGY's 1/2" heater hose is a 5-foot EPDM coolant line built to SAE 20R3 standards for durable radiator, heater core, and overflow reservoir connections. This 5-foot, 1/2" (13mm) inner diameter heater hose combines heat-resistant EPDM rubber with a robust 100psi working pressure rating,...

Direct-fit replacement air intake hose engineered to restore proper airflow for 2005–2019 Nissan Frontier and compatible 4.0L V6 Nissan vehicles. This X4XZ 696-009 intake hose is a purpose-made replacement for the OEM part (replacement part number 16576EA200). Manufactured to match original equipment specifications, the...

HOOTSUM 1 Inch Suction Hose is a 6.5-foot clear PVC transfer tube with wire reinforcement, threaded 1" and 3/4" adapters, and a debris strainer for safe diesel, kerosene, oil, and fuel pumping. This transparent suction hose is built for fuel transfer tasks where visibility,...

Meonum’s 2-pack 3/8" (10mm) submersible fuel hose kit delivers E85‑compatible, SAE J30R10‑rated in‑tank lines with stainless clamps for quick, reliable installation. These two one‑foot hoses are engineered for in‑tank fuel service where ethanol blends, gasoline, or diesel are present. Constructed with a fuel‑resistant inner...

VP Racing Fuels 3044 Deluxe Filler Hose (2 Pack) is a 14-inch capped hose assembly designed to attach to Motorsport and Sportsman containers for controlled transfer of fuels, oils and other approved fluids. Made to match the demands of pit crews and serious hobbyists,...

YSIL 5/32" (4mm) ID fuel line hose is a 10-foot NBR rubber push-lock hose built for automotive fuel and fluid routing with high temperature tolerance and up to 300 PSI working pressure. This YSIL fuel hose combines nitrile-butadiene rubber resilience with fiber braiding to...

Goodyear Belts 1060495 is a 6-rib, 49.5-inch serpentine belt engineered as an exact-fit, long-wearing replacement to restore quiet, reliable drive-system performance. This serpentine belt from Goodyear combines high-tensile cord, heat- and abrasion-resistant compounds, and precision rib geometry to meet or exceed original equipment standards....

EVIL ENERGY 3/8" NBR SAE 30R7 fuel hose line is a 10-foot, oil-resistant fuel hose assembly rated to 300 PSI and supplied with ten clamps for secure installation. This hose kit is built for fuel and oil systems where a compact, flexible line is...

X4XZ 17228-RN0-A00 is a direct-fit replacement air intake hose engineered to restore proper airflow between the airbox and throttle body on 2009–2015 Honda Pilot models. This replacement intake tube is molded to match the original equipment dimensions so it snaps into place and restores...

EVIL ENERGY 5/8" Heater Hose is a 5-foot EPDM coolant line built to SAE 20R3 standards for connecting radiators, overflow tanks and heater cores under temperatures from -40°F to 257°F. This heavy-duty heater hose is engineered for automotive cooling circuits that need a reliable,...

dojobkinb 3/8" (10mm) ID Fuel Line Hose is a 15-foot NBR rubber push-lock fuel hose rated for 300 PSI working pressure, engineered for automotive fuel systems and compatible fluids. This heavy-duty NBR (nitrile butadiene rubber) fuel hose delivers a combination of temperature resilience, chemical...

dojobkinb 3/8" (10mm) ID NBR fuel line hose is a 16.4-foot, high-pressure rubber push-lock hose rated to 300 PSI for automotive and engine fuel-system use. This hose is built from nitrile butadiene rubber (NBR) and sized for 3/8" (10mm) inner diameter applications where a...

GaeaAuto throttle body heater inlet and outlet pipe hose is a direct-fit replacement assembly designed to restore proper coolant flow and sealing on compatible Chevy Cruze and Chevy Sonic models. If your vehicle shows coolant smells, visible leakage, or degraded heater performance around the...

ROADFORMER 2-inch hose clamps are full 300-series stainless steel worm-gear fasteners sized for 40–64mm hoses, supplied as a 10-pack for durable, corrosion-resistant hose and pipe connections. These clamps combine an all-stainless construction with a slotted hex head screw and inward worm-gear design to give...

ROADFORMER 1.5" full stainless steel worm-drive hose clamp, adjustable from 27mm to 51mm, provides a corrosion-resistant, high-torque solution for securing hoses, pipes and cables in automotive, marine and industrial use. These ROADFORMER hose clamps combine 300-series stainless-steel banding, housing and screw to deliver long-lasting...

ROADFORMER 1.75-inch hose clamps are full 300-series stainless steel worm-drive clamps sized for 33–57mm (1.3–2.25") hoses, sold as a 10-piece pack for durable, corrosion-resistant sealing. These clamps combine an all-stainless construction with a slotted hex head screw and inner worm gear so you can...

ROADFORMER 1.25 inch all-stainless worm-gear hose clamps, 21–44mm range, come in a 10-piece pack for heavy-duty, corrosion-resistant hose and pipe fastening. These clamps combine a 300-series stainless steel band, housing and slotted hex screw with an internal worm drive to give reliable, adjustable clamping...

VINMS 17228-RYP-A00 is a direct-fit replacement air intake hose tube with clamps designed to restore proper airflow for 2006–2008 Honda Pilot V6 3.5L models. This replacement intake hose is engineered to match the original equipment fit and function for compatible Honda Pilot trims. Built...

ALLWIN 5/8" ID Fuel Line Hose is a 10-foot, high-pressure NBR rubber fuel line kit with ten hose clamps designed for automotive fuel systems and small engines. This fuel hose kit includes a 10-foot length of 5/8" inner diameter (1" outer diameter) NBR rubber...

These are straight 10AN hose end fittings designed specifically for PTFE fuel lines, sold as a pair in black, made from 6061-T6 aluminum with a 360° swivel and rated for up to 1500 PSI. If you run PTFE-lined fuel hoses, choosing fittings that match...

EVIL ENERGY 6AN CPE nylon-braided fuel hose is a 5-foot, high-pressure AN6 line built for fuel, oil, and hydraulic applications that demand durable, heat- and pressure-resistant performance. This braided AN6 hose combines a CPE rubber inner tube with 304 stainless steel wire reinforcement and...

EVIL ENERGY 4AN Fuel Line is a 5‑foot, AN4 braided hose built with a CPE inner tube, 304 steel wire reinforcement and a nylon outer braid for high‑pressure fuel, oil, and fluid routing. This 4AN braided fuel hose from EVIL ENERGY is engineered for...

Uselection 5/8" ID 5‑foot silicone heater hose is a reinforced, high‑temperature coolant and radiator line built to replace brittle factory rubber hoses and resist pressure, heat, and coolant additives. This premium silicone hose is engineered as a direct, versatile replacement for heater, coolant, and...

VKQTS 6PCS 5ft silicone vacuum hose kit is a complete automotive vacuum-line set that supplies six internal diameters of heat-resistant silicone tubing plus 64 connectors and 24 clamps for reliable water and air routing. This silicone vacuum hose kit is built for routine vehicle...

VKQTS 6PCS 5ft Silicone Vacuum Hose Kit is a set of six durable silicone vacuum lines (5 ft each) in common inner diameters, bundled with 64 connectors and 24 clamps for reliable air and water routing in automotive and DIY projects. This kit supplies...

OFBAND 6-piece 5 ft silicone vacuum hose kit provides six black silicone tubes in 1/8", 5/32", 3/16", 1/4", 5/16" and 3/8" inner diameters for reliable air and water routing in automotive and workshop projects. This kit is designed for hobbyists, mechanics and DIYers who...

EVIL ENERGY 8AN Fuel Line is a 5-foot, CPE inner-layer, 304 wire-reinforced nylon-braided AN8 hose built for high-pressure automotive and racing fluid transfer. This heavy-duty AN8 hose pairs a chemically resistant CPE inner core with a 304 stainless steel wire reinforcement and a durable...

EVIL ENERGY 2PCS 8AN 45° hose end fittings are 6061-T6 aluminum swivel adapters designed to connect 8AN braided fuel hoses with a 45-degree, 37-degree-seal AN connection for durable, high-pressure use. These two 8AN 45° hose end fittings offer a compact, angled solution when routing...

EVIL ENERGY 4AN straight hose end fitting — a 2-piece, 6061-T6 aluminum swivel connector engineered for stainless-steel and nylon braided fuel lines. These EVIL ENERGY 4AN straight fittings provide a reusable, high-pressure connection for braided CPE fuel hoses. Designed with a 37° AN sealing...

EVIL ENERGY 2PCS 4AN 90 Degree Hose End Fittings are 6061‑T6 aluminum swivel connectors designed for stainless steel and nylon braided fuel hoses, offering a reusable 90° AN seal and 360° rotation for tight installations. These two 4AN 90° hose end fittings from EVIL...

EVIL ENERGY 2PCS 10AN 45° hose end fittings are lightweight, 6061-T6 aluminum swivel connectors that adapt 7/8-14 UNF threaded ports to 37° AN-sealed braided fuel hoses. These two 10AN 45-degree hose ends are designed for professional and DIY automotive fuel, oil, or coolant lines...

EVIL ENERGY 6AN 45° swivel hose end fittings are aluminum, reusable connectors designed to join 6AN CPE braided hoses with a 45° angled, 360° swivel for easier routing and leak-resistant sealing. These two-pack hose end fittings fit 6AN (9/16-18 UNF) lines and seal with...

EVIL ENERGY 2PCS 8AN 90 Degree Hose End Fittings are 3/4-16 UNF threaded, 6061-T6 aluminum swivel adapters designed for stainless steel and nylon braided fuel lines. These 8AN 90° hose end fittings provide a compact, durable junction for braided fuel hoses where space, routing...

EVIL ENERGY 6AN straight hose end fittings are 2 reusable, 6061-T6 aluminum swivel fittings designed to attach to CPE braided fuel hose for a secure, high-pressure connection. These two 6AN straight hose end fittings provide a compact, durable solution for connecting braided fuel or...

EVIL ENERGY 2PCS 8AN straight hose end fittings are 3/4-16 UNF aluminum swivel connectors designed for use with stainless steel and nylon braided fuel hoses. These straight hose ends pair a 37-degree AN sealing face with a 3/4-16 UNF thread and a 360° swivel...

EVIL ENERGY 10AN straight swivel hose end fittings are aluminum, reusable 7/8-14 UNF threaded connectors designed to join CPE braided stainless or nylon hoses with a 37° seat for leak-resistant sealing. These two black anodized fittings give you a compact, high-pressure solution for fuel,...

EVIL ENERGY 6AN 90-degree hose end fittings are compact, reusable aluminum adapters designed to connect 6AN braided fuel hoses with a 9/16-18 UNF threaded port while providing a 360° swivel for easy routing. These two-piece 6AN 90° fittings from EVIL ENERGY are machined from...