Engine & Vehicle Sensors

RANSOTO O2 Oxygen Sensor 15717 set of four replaces upstream and downstream sensors for compatible Ford, Lincoln, Mazda and Mercury models to restore proper exhaust sensing and engine management. These RANSOTO oxygen sensors are aftermarket replacements designed to match factory fit and electrical connections...

Delphi SS10206 is a precision crankshaft position sensor that supplies accurate crank angle and engine speed data to the vehicle’s control module for dependable ignition timing and fuel management. Built to Delphi's OEM-derived standards, the SS10206 is engineered for consistent signal output, thermal resilience,...

Hitachi CPS0008 is a brand-new camshaft position sensor engineered to restore accurate valve timing signals to your engine control unit for reliable ignition and fuel timing. The camshaft position sensor is a small but critical engine sensor that tells the ECU the exact position...

BDFHYK replacement oxygen sensor set fits Nissan Rogue and Altima 2010–2013 models, providing direct-fit upstream and downstream sensing to restore fuel trim and emissions monitoring. This BDFHYK oxygen sensor assembly is engineered as a direct replacement for the factory units listed by OE cross-references,...

Robinair 16916 is the factory oxygen sensor designed as the direct, plug-and-play replacement for Robinair R-1234yf AC machines and refrigerant identifiers. When your Robinair AC machine or refrigerant identifier signals a sensor warning or lockout, swapping in a genuine 16916 restores the unit’s original...

Dasbecan Flex Fuel Composition Sensor accurately measures ethanol content so your compatible Chevy or GMC engine control module can adjust timing for smoother, more reliable operation. This direct-fit replacement sensor is designed for select Chevy and GMC trucks and SUVs from the early 2000s....

This four-piece xinlidatech oxygen sensor kit replaces the upstream left/right and both downstream O2 sensors for Ford F-150 2.7L V6 Turbocharged models from 2018–2020. If your F-150 is running the 2.7L EcoBoost V6 from model years 2018, 2019, or 2020, this complete sensor set...

Denso 234-9001 is a direct-fit upstream air–fuel ratio (AFR) oxygen sensor with a 10.63" 4-wire heated harness designed to replace the factory sensor without wiring modifications. This Denso air–fuel ratio sensor provides precise exhaust gas readings using a zirconia solid electrolyte element and a...

Denso 234-4168 is a direct-replacement narrow-band oxygen (O2) sensor engineered to restore precise air-fuel feedback on specified Lexus, Scion and Toyota models. This Denso sensor is built to match original equipment specifications so the engine control unit receives accurate exhaust oxygen readings. The part...

Replacement THUNDERMINGO mass air flow (MAF) sensor 22250-35050 for 2.4L 22REC Toyota Pickup and 4Runner (1989–1995). This THUNDERMINGO MAF meter is a direct-fit replacement designed to restore accurate air-flow readings for Toyota 2.4L 22REC four-cylinder engines used in Pickup (1989–1995) and 4Runner (1990–1995) models....

The BOSCH 17014 Premium Original Equipment Oxygen Sensor is a direct-fit replacement oxygen sensor engineered to restore accurate air-fuel feedback and reliable emissions performance. Built from Bosch's decades of sensor development, this single oxygen sensor uses a double laser-welded stainless steel housing, a fast-acting...

BOSCH 0280218190 is a 100% new original equipment mass air flow (MAF) sensor engineered to deliver precise airflow readings for correct fuel metering and reliable engine performance. Bosch has supplied OE-grade airflow sensing to vehicle manufacturers worldwide; this MAF sensor follows that legacy by...

Zxyculture oxygen sensor for Infiniti JX35 and Nissan Pathfinder (2013–2014) is a direct-fit replacement sensor engineered to restore accurate exhaust monitoring and help your engine management system optimize combustion. This aftermarket replacement oxygen sensor is built for 3.5L V6 models from Infiniti and Nissan...

The BOSCH 17025 is a direct-fit premium wideband oxygen (A/F) sensor engineered to deliver precise air/fuel readings for aftermarket high-performance and tuning applications. Designed and manufactured by Bosch, the 17025 wideband O2 sensor offers a more detailed air/fuel measurement than a basic rich/lean oxygen...

The Delphi AF10060 Mass Air Flow Sensor precisely measures incoming air to help restore correct engine fueling, drivability, and emissions behavior. The AF10060 from Delphi is a direct-fit mass air flow (MAF) sensor designed to relay continuous airflow volume and velocity data to the...

KVZKVZ 16916 oxygen sensor replacement restores accurate O2 readings for Robinair R-1234YF refrigerant identifiers, reducing false errors and extending instrument uptime. If your Robinair AC1234 series refrigerant identifier is showing error messages like "Replace ID O2 Sensor Soon" or "Analyzer Error 6," the KVZKVZ...

The Motorcraft DY1164 Throttle Position Sensor is an OEM-grade sensor that provides accurate throttle position feedback to engine control systems for smooth acceleration and reliable drivability. The DY1164 is designed and produced by Motorcraft, a trusted name in automotive replacement components. This sensor replaces...

The BW SR-X2V (4OXV) is a replacement oxygen (O2) sensor designed for BW/CiTiceL-equipped portable gas detectors to reliably monitor ambient oxygen levels. This original-equipment compatible sensor fits a range of BW portable monitors and is intended for technicians, safety managers, and maintenance teams who...

The Dorman 904-500 Diesel Injection Control Pressure (IPC) Sensor is a direct-fit replacement that restores accurate fuel pressure feedback to your engine control module for smoother idle and more predictable performance. If your diesel engine is idling unevenly, misfiring, or stalling, a worn or...

The Denso 234-9005 is a direct-replacement air/fuel ratio (oxygen) sensor engineered to restore accurate air–fuel monitoring and ensure correct engine management for specified Honda and Acura models. This replacement sensor from Denso is built to the rigorous standards of original-equipment manufacturers, offering a precision...

A-Premium’s 8-piece kit includes direct-replacement camshaft position sensors and camshaft adjuster magnets engineered to restore accurate valve timing and sensor feedback on compatible Mercedes-Benz models. This complete kit bundles both camshaft position sensors and camshaft adjuster (VVT) magnets in one purchase, making it straightforward...

Holley EFI 554-102 is a 100 PSI stainless steel pressure sensor that delivers a linear 0.5–4.5V output for plug-and-play fuel or oil pressure monitoring with Holley EFI systems. Built to complement Holley EFI controllers and aftermarket installations, this compact sensor converts mechanical pressure into...

Denso 234-5010 is a direct-fit wide-band air/fuel ratio sensor designed to restore accurate fuel trim control for specified Acura, Honda and Saturn models. This Denso sensor replaces the factory unit with a precision-built wide-band element and factory-style harness to deliver rapid, repeatable oxygen sensing...

The BOSCH 0281006325 is an original-equipment fuel rail pressure sensor engineered to deliver precise, fast pressure readings for compatible Dodge Ram engines. This fuel rail pressure sensor from Bosch measures fuel pressure quickly and accurately, supplying essential data to the engine control unit so...

Denso 234-9049 is a direct-fit wide-band air/fuel ratio sensor engineered to replace the original unit on select Lexus, Scion and Toyota vehicles. This OEM-grade sensor measures the proportion of air to fuel entering the engine and communicates that data to the engine control unit...

THUNDERMINGO Mass Air Flow Sensor 22250-65010 is a direct-fit replacement MAF for Toyota Pickup and 4Runner V6 3.0L (1988–1995) that measures incoming air to help your engine management system restore proper air/fuel calculations. This THUNDERMINGO replacement MAF sensor is designed to match the original...

Upstream NOx Sensor for 2013–2018 Dodge Ram 2500/3500/4500/5500 (6.7L Cummins) — a direct-fit replacement that restores NOx monitoring and resolves common fault codes. If your 6.7L Cummins-equipped Dodge Ram is showing emissions-related fault codes, poor fuel-management messages, or a persistent check-engine light, a worn...

The Delphi AF10043 Mass Air Flow Sensor precisely measures incoming air to help the engine control module achieve the correct air–fuel balance. The Delphi AF10043 (MAF sensor) provides accurate airflow data that the engine control unit uses to calculate fuel injection and timing. Built...

Bosch 0258017025 is a ready-to-fit oxygen (lambda) sensor with a vehicle-specific connector that helps the engine control unit monitor exhaust oxygen and optimise the air–fuel mixture. This Bosch lambda sensor is designed as a direct-replacement part for compatible vehicles, combining Bosch’s OE-level testing and...