Artbreath Supersonic Red 3U5 Toyota Touch-Up Paint Pen 0.4 fl oz — OEM Color Match, Rust-Resistant

If you own a Toyota Avalon, Camry, RAV4, Corolla, Highlander, Prius, Sequoia, Sienna or Tacoma in Supersonic Red, this 0.4 fl oz touch-up bottle is made to deliver a close OEM color match and durable surface protection. The paint combines strong adhesion with rust- and water-resistant properties, and each bottle includes both a fine brush and a pen pin for controlled application. It’s intended for small chips, surface scratches and quick spot repairs where a precise color match and simple application matter.

How accurately will this paint match my Toyota’s Supersonic Red?

The Supersonic Red 3U5 formula is produced to align with Toyota’s factory color codes, reducing visible differences when applied correctly. Because actual vehicle paint can change with age, lighting and finish, test a small amount on scrap before full application.

• Designed to match Toyota 3U5 Supersonic Red OEM tones.
• Shake well before use to blend pigments evenly for the best match.
• Try the paint on paper or an inconspicuous spot to verify color in your light.
• Works best on factory finishes; older or repainted panels may vary.

What’s the easiest way to use this touch-up paint pen for neat repairs?

Simple prep and careful application give the cleanest results. Clean the area thoroughly, remove grease or wax, and allow the surface to dry; then apply thin coats with the included brush or pen pin until the chip is filled and level with surrounding paint.

• Clean area with soap and water, then degrease before painting.
• Shake the bottle for about one minute to mix pigments and solvents.
• Use the pen pin for tiny chips; use the brush for broader coverage.
• Allow about 10 minutes between thin coats for faster build and drying.

Will this paint protect against rust and further damage?

The product’s formulation includes adhesion and waterproof qualities intended to shield exposed metal from moisture and surface corrosion. Properly applied and cured touch-up paint helps reduce the risk of rust forming at the damaged site, though full restoration of structural protection may require professional refinishing on extensive damage.

• Strong adhesion bonds paint to metal and existing finish.
• Water-resistant properties help keep moisture out of chips.
• Avoid relying on touch-up alone for deep rust or major panel damage.
• Use on small chips and superficial scratches for best benefit.

How much area does one 0.4 fl oz bottle cover and how long until it’s dry?

One bottle covers roughly 0.08 square meters when applied as thin layers, so it’s tailored to small to moderate repairs rather than full-panel repainting. The paint dries quickly to the touch; expect about 10 minutes between thin coats, with full curing over a longer period depending on temperature and humidity.

• Coverage: about 0.08 square meters per 0.4 fl oz bottle.
• Touch-dry in roughly 10 minutes under normal conditions.
• Apply multiple thin coats rather than one heavy layer for best finish.
• Allow longer curing in cold or humid environments.

Who is this for: Artbreath Supersonic Red 3U5 touch-up paint is made for Toyota owners who need a quick, affordable color-matched repair for chips and light scratches. It suits DIYers, car-detailing enthusiasts and drivers who prefer to maintain their factory look without a shop visit. If your vehicle has factory Supersonic Red paint and you want a straightforward, rust-inhibiting spot repair, this compact pen-and-brush kit is a practical solution. For large-scale repainting or severe rust, consult a body shop for professional restoration.