EVIL ENERGY 19-Row 10AN Oil Cooler — Universal Aluminum Stacked-Plate, Compact 12.9"×6.7"

If you're upgrading cooling capacity or adding an external oil cooler, this compact 19-row unit delivers a high-efficiency stacked-plate design in a lightweight aluminum housing. It holds 0.45 liters of oil, fits most vehicles that can accommodate its 12.91" × 6.67" × 1.97" footprint, and uses 10AN fittings for common performance plumbing. The kit is pressure tested to 116 PSI and has a burst rating of 232 PSI, making it suitable for street and light-performance applications when installed with adequate airflow.

How will this oil cooler change my engine's operating temperatures?

The stacked-plate construction increases surface area for heat exchange, so oil passing through sheds heat faster than in a factory line. This stabilizes oil temperature during sustained loads, which helps preserve oil viscosity and prolong component life when combined with proper maintenance.

• 19 stacked cooling rows maximize contact area for faster heat transfer.
• Aluminum alloy body conducts heat efficiently while remaining lightweight.
• 0.45 L internal capacity adds a modest reservoir to the oil circuit.
• Mount where airflow is strong — front bumper or behind grille for best results.

Will the EVIL ENERGY cooler fit my vehicle and what do I need to check?

This unit is sold as a universal cooler and will fit many cars, trucks, and custom builds, but you must confirm physical clearance and bracket compatibility. The cooler requires a mounting area larger than 12.91" × 6.67" × 1.97" and may need additional fittings or hoses depending on your engine's plumbing.

• Confirm installation space is larger than the cooler dimensions before ordering.
• Compatible with 330mm engine oil cooler brackets; additional brackets may be required.
• Uses 10AN ports — adapters or hose ends may be necessary for some systems.
• Instructions included to aid placement and secure mounting orientation.

What are the key specifications and durability ratings I should know?

Important performance numbers are the internal oil capacity and the pressure ratings achieved during testing. These figures help you assess suitability for your vehicle and expected operating conditions.

• Size: 12.91" × 6.67" × 1.97" — compact profile for tight installations.
• Oil capacity: 0.45 liters, suitable for supplemental cooling circuits.
• Test pressure: 116 PSI; burst pressure: 232 PSI — verified for strength.
• Constructed from aluminum alloy for corrosion resistance and thermal conductivity.

How easy is it to install and where should I mount it?

Installation is straightforward for anyone familiar with basic plumbing and vehicle mounting. Place the cooler where it receives consistent airflow and route hoses to avoid sharp bends or heat sources; the kit includes instructions to guide the install.

• Mount in front of the radiator or behind grille for optimal airflow.
• Avoid contact with hot exhaust components and moving parts.
• Some vehicles need additional fittings or custom hoses — plan accordingly.
• Follow included instructions and torque recommendations for fittings.

Who is this for? The EVIL ENERGY 19-row 10AN oil cooler is aimed at enthusiasts and DIY mechanics who need a compact, efficient external cooler for engines, transmissions, or differentials. It's a good match for performance street cars, tow rigs, or any vehicle experiencing sustained high-load operation where extra oil cooling would help maintain stable lubrication temperatures. If you need a universal aluminum cooler with verified pressure ratings and 10AN plumbing, this unit offers a practical balance of size, capacity, and heat-transfer performance.