Generic 1310WJ U-Joint Kit for Dana 30/44 Front Axles — 1.188" Cap, Pack of 2, Inside Snap Ring

The 5-760X U-joint kit is a pair of 1310WJ inside-snap-ring universal joints for Dana 30 and Dana 44 front axle wheel ends with 1.188" bearing caps, sold as a pack of two with snap rings.

This kit replaces worn or failed U-joints on select Jeep vehicles using Dana 30 or Dana 44 front axles. It matches the 1310WJ series Inside Snap Ring (ISR) configuration and is built to the exact bearing cap diameter and snap-ring span listed by the original equipment specification. Before purchasing, verify the axle type and measure your current U-joint to ensure the 1.188" bearing cap diameter and 2.188" length between snap rings are a direct match.

How do I confirm this U-joint fits my Jeep?

Fitment requires matching both axle type and U-joint dimensions. This kit is intended only for Dana 30 or Dana 44 front axles with wheel-end 1310WJ style U-joints; it won’t fit other axle styles or different cap sizes.

• Check your vehicle model years: common fits include 1993–2011 Wrangler variants, 1975–2001 Cherokee, and select Wagoneer/Grand Wagoneer years.
• Measure bearing cap diameter: must be 1.188" to match this part.
• Measure snap-ring span (length between snap rings): must be 2.188".
• Confirm OE reference or compare to your old U-joint part number when possible.

What are the key specifications of the 5-760X 1310WJ joint?

This U-joint follows the 1310WJ ISR non-greasable design with specific dimensional requirements. The kit is supplied with inside snap rings and intended for front axle wheel-end service where that style is used.

• Bearing cap diameter: 1.188 inches (critical match requirement).
• Length between snap rings: 2.188 inches.
• Design: 1310WJ series, inside snap ring (ISR), non-greasable construction.
• Package contents: two U-joints plus eight inside snap rings for installation.

Which Jeep models commonly use this replacement U-joint?

The 5-760X often replaces wheel-end U-joints on many older and mid-2000s Jeeps fitted with Dana 30 or Dana 44 front axles. Fit depends on axle variant rather than model year alone, so cross-reference the axle and U-joint size.

• 1993–1995 Jeep Wrangler 4WD (1.188" cup diameter)
• 1997–2006 Jeep Wrangler / TJ 4WD and 2007–2011 Wrangler Rubicon/Unlimited Rubicon
• 1975–2001 Jeep Cherokee 4WD
• 1975–1990 Jeep Wagoneer and 1984–1991 Grand Wagoneer

Who is this for? This U-joint kit is for DIY mechanics, restoration professionals, and off-road owners who need a direct-fit 1310WJ ISR replacement for Dana 30 or Dana 44 front axle wheel ends. If you are repairing or refreshing front axle driveline components on compatible Jeep models and your measurements match the listed specs, this kit provides the correct non-greasable U-joint and snap rings. If you’re unsure about compatibility, measure your original U-joint or consult an axle specialist before ordering to avoid fitment issues.