KOCHCHEMIE F6.01 Fine Cut Compound 250ml — Rapid scratch & swirl removal, high gloss (CUT 6 / GLOSS 7)

Engineered for modern paint systems, F6.01 uses premium aluminum oxide abrasives in an advanced grain matrix to deliver rapid correction without leaving heavy holograms or excessive marring. The silicone-free formula balances cutting power (CUT: 6.0) with strong reflective finish (GLOSS: 7.0), making it suitable for detailers and enthusiasts who need efficient defect removal and a high-quality optical result.

How quickly does F6.01 remove common scratches and sanding marks?

F6.01 was formulated for fast removal of everyday wash scratches, swirl marks and sanding marks up to 2500 grit. Its intelligent abrasive distribution concentrates cutting where it’s needed and smooths out as polishing progresses, so you get visible correction in fewer passes.

• Removes wash system scratches and light swirl marks rapidly
• Eliminates sanding marks from up to 2500 grit with correct technique
• Requires fewer passes than many comparable fine-cut compounds

What is the recommended method to polish with this compound?

For best results, apply a small amount of F6.01 to a suitable pad (KOCHCHEMIE FINE CUT Yellow Pad or lambswool pad). Work crosswise at up to 2,000 rpm, starting with higher pressure at lower speed, then easing pressure and increasing speed to enhance gloss and refine the finish.

• Use a pre-cleaned, cool surface — do not polish hot panels
• Begin with higher pressure and lower speed, then reduce pressure and increase speed
• Wipe residue with a clean microfiber (e.g., The Rag Company Edgeless)

Which surfaces and paints is F6.01 safe for?

F6.01 is optimized for modern, scratch-resistant and clear-coated paints commonly found on cars, motorcycles and commercial vehicles. It is effective on medium to heavily weathered paint but always check compatibility on a small hidden area before full application.

• Suitable for clear coats and modern OEM finishes
• Intended for automotive paintwork on cars, bikes, and vans
• Test on an inconspicuous spot if unsure about older or specialty coatings

How do I achieve the best final gloss after using F6.01?

After correcting defects with F6.01, refine the surface with a fine finishing polish such as KOCHCHEMIE Micro Cut M3.02 for a mirror-like result. Proper pad choice, controlled machine speed, and final wipe-down with a plush microfiber will reveal maximum clarity and depth.

• Follow up with KOCHCHEMIE Micro Cut M3.02 for peak gloss
• Use a clean microfiber cloth to remove residue and inspect results
• If needed, repeat with lighter pressure and a finishing pad for extra shine

Who is this for: KOCHCHEMIE F6.01 is aimed at professional detailers, bodyshop technicians and automotive enthusiasts who demand efficient paint correction without sacrificing finish quality. It’s ideal for anyone restoring medium to heavily weathered paint, repairing wash-induced marks, or removing fine sanding marks prior to final refinement.

Usage reminders: Shake well before use, check compatibility on a small test area, avoid working on hot panels, and protect the product from frost and extreme heat. This information is advisory; KOCHCHEMIE assumes no liability for improper use.