Redants 3500 lb Trailer Hub Kit 2-Pack — 5x4.5" Bolt Pattern, Pre‑Assembled & Pre‑Greased for #84 Spindles

Redants 2-pack 3500 lb trailer hub kit is a pre-assembled, pre-lubricated 5×4.5" bolt-pattern hub set designed to mount on #84 tapered spindles (fits 1-1/16" to 1-3/8").

This hub kit arrives ready to install with bearings and grease seals fitted at the factory, so you can replace damaged hubs or upgrade wheels without chasing small parts. Built from coated steel and rubber components, the assemblies are finished in a corrosion-resistant black coating and include every fastener and cap needed for standard tapered spindles. The set is engineered around a 3500 lb axle rating and a 5-lug, 4.5" bolt pattern common to light trailers.

How does this kit simplify a hub replacement?

Because the bearings and grease seals are pre-installed and factory-lubed, the kit removes most of the prep work that normally slows down a hub swap. You can mount the hub directly to a compatible tapered spindle and finish with the supplied castle nut and cotter pin.

• Pre-lubricated L44649 and L68149 bearings included
• Pre-installed grease seals and dust caps save assembly steps
• All hardware supplied: lug nuts (1/2"-20), washers, castle nuts, cotter pins

Will this hub fit my trailer spindle and wheel bolt pattern?

This kit is built for tapered #84 spindles that accept inner bearing I.D. 1-1/16" and outer bearing I.D. 1-3/8". The flange matches a 5-lug wheel with a 4.5" (5×4.5") bolt circle, the common configuration for many 3500 lb axles.

• Compatible spindle taper: #84 (1-1/16" to 1-3/8")
• Bolt pattern: 5 × 4.5" (5 on 4.5")
• Rated for 3500 lb trailer axle applications

What parts come in the package and what are their dimensions?

The kit bundles two complete hubs plus the nuts, caps, bearings and fasteners needed for immediate installation. Key dimensions and part identifiers are supplied so you can confirm fit before installation.

• Included: 2 hub assemblies (pre-assembled), 2 dust caps (O.D. 1.98")
• Bearing set: L44649 (I.D. 1-1/16"), L68149 (I.D. 1-3/8")
• Grease seals pre-installed (O.D. 2.56", I.D. 1.72"), 10 lug nuts (1/2"-20), 2 washers (I.D. 1")
• Hardware: 2 castle nuts (I.D. 1"), 2 cotter pins (length 2.25")

How durable and weather-resistant are these hubs?

The hubs are formed from high-strength steel and finished with a protective black coating to reduce corrosion on exposed surfaces. Rubber and precision bearings are selected to control friction and noise while extending service life when used and maintained as intended.

• Black corrosion-resistant surface coating
• High bearing accuracy for lower friction and quieter operation
• Designed for routine trailer use with periodic maintenance

Who is this for: This Redants hub kit is intended for trailer owners, DIY mechanics and service shops that need a ready-to-install 5-lug hub solution for 3500 lb axles with #84 tapered spindles. It fits common boat, utility, car-hauler, and landscaping trailers where a 5×4.5" bolt pattern and the specified bearing sizes match the axle. If you have a straight spindle or a different bolt pattern, confirm fitment before purchase.