SPTA 5-inch Buffing Polishing Pads 5-Pack Kit (Coarse to Ultra-Fine) — Hook-and-Loop, Washable

SPTA 5" buffing polishing pads are a five-pad foam kit (coarse to ultra-fine) designed for orbital, DA and rotary polishers to compount, polish and finish painted surfaces.

This set includes five color-coded foam pads with graded cutting levels so you can move from heavy defect removal to ultra-fine finishing without guessing which pad to use. Each pad features a hook-and-loop backing for fast changes, an oversized front edge to protect paint and plate, and open-cell foam intended to hold compound while dispersing heat. The pads are washable, reusable and intended to work with a variety of SPTA and third-party compounds on cars, boats, furniture and other coated surfaces.

Which pad should I choose for deep scratches and sanding marks?

For aggressive removal of sanding marks, heavy oxidation or deep scratches, use the T120 (green) heavy-cut pad with a compatible heavy-cut compound. It is formulated to remove coarse abrasion quickly but will leave some micro-marring that requires follow-up polishing.

• T120 Green — heavy-cut for 1200/1500 grit marks and heavy oxidation
• Use with heavy-cut compound and higher speed on rotary or steady pressure on DA
• Follow with a medium-cut pad to refine the finish

How do I progress from cutting to a high-gloss finish?

Work through the pad progression: start with heavy or high-cut, move to moderate and medium-cut pads to refine defects, and finish with the ultra-fine red pad for gloss. Each stage removes the micro-marring created by the previous pad, producing a smooth, reflective surface when paired with matching compounds.

• T80 Yellow — high-cut to remove 1500/2000 grit marks and heavy swirls
• T60 Blue and T40 Orange — moderate and medium cutting for refining
• T10 Red — ultra-fine finishing pad for swirl-free shine

Will these pads work on my DA, RO or rotary polisher?

Yes — the pads are sized for 5" backing plates and feature standard hook-and-loop fasteners for DA, RO (random orbital) and rotary machines, as well as pneumatic polishers. The dual-diameter front/back design reduces edge contact and helps protect delicate trim while staying compatible with most 5" plates.

• Front diameter 5.5" (138 mm), back diameter 5" (125 mm) to reduce scuffing
• Hook-and-loop backing fits common 5" backing plates
• Suitable for electric and air polishers, and some random orbit sanders

How do I care for and reuse these pads?

After use, rinse pads with clean water and squeeze out excess, or use a pad-cleaning brush to remove compound residue. Allow pads to dry naturally away from direct heat; they are designed for multiple uses if kept clean and handled gently.

• Washable open-cell foam for good compound retention and heat dissipation
• Lightweight, bendable construction resists tearing under normal use
• Lasts for several cars when cleaned and maintained properly

Who is this for: Detailers, DIY car enthusiasts, body shops and craftsmen who need a simple, color-coded pad lineup to move from aggressive defect removal to mirror-like finishing. This kit suits anyone using 5" backing plates on DA, RO or rotary polishers and wanting reusable pads that hold compound, disperse heat and protect delicate edges during polishing tasks.