TKKEUEP Fuel Filler Neck Hose — 2" ID 15 7/8" Straight, Nitrile-Lined Reinforced with 4 Clamps

TKKEUEP Reinforced Gasoline Fuel Filler Neck Hose is a straight, 2" inside-diameter replacement hose (15 7/8" long) that includes four hose clamps and a nitrile-lined, nylon-cord reinforced construction for reliable fuel transfer.

When a cracked, brittle, or leaking filler neck hose is compromising refueling safety or causing fuel odors, this TKKEUEP replacement provides a durable, EPA-compatible option designed to withstand typical automotive conditions. Built with a nitrile rubber tube and internal nylon cording, the hose balances flexibility with strength and resists temperatures from -40°F to 212°F (-40°C to 100°C). It arrives long enough for most filler-to-tank runs and includes four stainless-style clamps so you can install it right away.

How will this hose hold up to fuel and temperature exposure?

The TKKEUEP filler hose uses a nitrile inner tube formulated to resist gasoline and common fuel blends allowed by regulatory standards, while the nylon reinforcement prevents stretch and collapse. Its operating temperature range covers cold starts and hot engine bay conditions typically encountered in passenger vehicles and small equipment.

• Nitrile tube resists fuel permeation and degradation.
• Nylon cording provides tensile strength and shape retention.
• Rated for -40°F to 212°F for broad environmental tolerance.
• Manufactured to meet maximum fuel blend concentrations allowed by EPA guidelines.

What are the size and fit details I need to check before ordering?

This filler neck hose is specified at 2 inches inside diameter and 15 7/8 inches overall length, measured from end to end. To ensure compatibility, measure the inside diameter of your existing hose and the distance from the tank connection to the filler neck; you can trim the hose for a precise fit if needed.

• Inside diameter: 2.00 inches (50.8 mm).
• Overall length: 15 7/8 inches (40.3 cm) before trimming.
• Designed as a straight connector—verify routing for bends or clamps.
• Includes four hose clamps sized to secure standard filler-neck fittings.

How easy is installation and what tools will I need?

Installation is straightforward for DIYers and professional mechanics alike: cut the hose to the required length, slide clamps over each end, push onto the filler neck and tank spigot, then tighten clamps. The hose is flexible enough to manipulate around common vehicle components and can be trimmed cleanly with a utility knife.

• Cut with a sharp box or utility knife for a clean end.
• Use a screwdriver or nut driver to tighten the hose clamps evenly.
• Flexible construction simplifies routing through tight spaces.
• Check for secure clamp seating and leak test after installation.

Will this hose work for venting or other fuel-system uses?

While optimized as a filler neck hose, the reinforced nitrile construction also suits certain fuel line and vent applications where a 2" ID and the stated temperature/fuel resistance are appropriate. Always confirm compatibility with your vehicle’s specifications and local regulations before repurposing.

• Suitable for filler neck, vent, and some fuel line duties when sizes match.
• Not a pressure-rated high-pressure fuel injection hose—intended for low-pressure fill/vent use.
• Cut-to-fit design allows adaptation for custom routing or replacement needs.
• Includes clamps to secure ends for low-pressure sealing.

Who is this for: The TKKEUEP Gasoline Fuel Filler Neck Hose is intended for car owners, mechanics, and small-vehicle technicians who need a reliable, easy-to-install replacement part for fuel filler connections. It suits vehicles and equipment that require a straight 2" ID hose about 15 7/8" long, and for anyone who wants a resilient nitrile-lined hose with reinforcement and included clamps for a complete replacement.