U-POL Dolphin Glaze Self-Leveling Polyester Finishing Glaze 440ml — Fast Tack-Free, Shrink-Resistant

U-POL Dolphin Glaze 0714 is a two-component, self-leveling polyester finishing glaze designed for final skim coats or direct correction of minor surface imperfections before painting.

Engineered for automotive bodywork, this 440ml polyester finishing glaze flows out to a smooth, shrink-resistant film that fills fine pinholes and sanding scratches without bubbling or sinking. It bonds to filler, OEM paint and bare metals, cures quickly to a tack-free surface and is formulated to resist bleed-through, making it a reliable final skim for repairs that require a refined substrate prior to primer or topcoat.

How does Dolphin Glaze help achieve a smooth final surface?

The glaze levels itself as it cures, closing small sanding scratches and feathered edges so less block-sanding is needed. Its low-shrink formulation maintains thickness across repairs, giving a consistent base for subsequent coatings.

• Self-leveling consistency reduces surface texture and orange peel.
• Shrink-resistant chemistry prevents thin spots after curing.
• Quick tack-free time permits fast sanding and recoating.
• Works over polyester filler for a smooth skim finish.

Can this product be used on bare metal and OEM finishes?

Yes — Dolphin Glaze bonds to a wide range of substrates including bare steel, galvanized/zinc-coated steel, aluminum and factory paint. Proper surface prep improves adhesion and ensures a durable skim prior to primer or paint application.

• Adheres to bare and coated metals after degreasing and scuffing.
• Accepts application over OEM finishes when cleaned and abraded.
• Compatible with polyester putty repairs as a final skim coat.
• Resists bleed-through from common substrates when mixed and applied correctly.

What are the practical application and drying characteristics?

The product is a two-part system supplied in a 440ml container requiring a catalyst for curing; it spreads thinly and levels quickly to a tack-free state ideal for sanding. Its fast drying allows multiple operations in a single shift while avoiding pinholes and surface sinking.

• Two-component mixing enables reliable cure and hardness.
• Flows easily to fill minor imperfections without brush marks.
• Fast tack-free development reduces wait time between steps.
• Designed to be sanded with fine abrasives for a refined finish.

How should I prepare surfaces and finish after application?

Surface preparation includes cleaning, degreasing and light abrasion to remove contaminants and create a keyed surface. After curing to a tack-free condition, sand progressively with fine grit and follow with primer or topcoat according to your paint system.

• Clean and degrease to eliminate oils and silicone residues.
• Scuff with appropriate abrasives for improved mechanical adhesion.
• Apply a thin, even skim; avoid excessive build-up to minimize sagging.
• Sand to feather edges, then prime or topcoat as required by the paint shop workflow.

Who is this for: U-POL Dolphin Glaze 0714 is aimed at professional body shops, experienced hobbyists and restoration specialists who need a dependable finishing glaze for final skimming and defect correction before painting. If you work with polyester fillers or perform panel repairs on steel, galvanized metal or aluminum and require a product that levels out minor flaws, dries quickly, and sands to a fine surface, this glaze offers a practical solution. Avoid using it without the recommended catalyst or on contaminated surfaces; for best results follow U-POL mixing, application and safety instructions.