VEVOR 15L Pneumatic/Manual Fluid Extractor Pump — 4 gal Oil Changer with Long Suction Hose & Dipstick

VEVOR's 15L pneumatic/manual fluid extractor pump is a dual-mode oil changer kit that quickly and cleanly removes engine and gearbox fluids using either compressed air or hand operation.

This compact 4-gallon (15L) extractor combines a vacuum tank, multiple suction tubes, a dipstick, and a long suction hose to simplify routine fluid service on cars, motorcycles, lawn equipment, and boats. Designed for home garages and small shops, it aims to reduce spills, speed up fluid swaps, and reach into deep reservoirs that drain plugs and funnels often miss.

How does the dual pneumatic and manual operation help me work faster or without extra tools?

The two-mode design lets you choose speed or independence: use compressed air for rapid extraction when you have a shop air supply, or switch to manual pumping when working remotely or without an air source. Both modes feed into the same 15L tank and use the supplied tubes and hose for extraction, so you don’t need separate equipment.

• Pneumatic mode: uses shop air for higher suction and quicker drain times.
• Manual mode: hand-pump operation for on-the-road or remote use.
• Same tank and fittings: no swapping parts between modes.
• Works with standard compressed-air fittings for easy hookup.

What types of fluids and vehicles can this extractor handle?

This extractor is built to pull a wide range of automotive and small-engine liquids including engine oil, gear oil, power steering fluid, and brake fluid. The kit's multiple tube diameters and the long suction hose reach into deep or oddly shaped reservoirs, so it fits cars, motorcycles, ATVs, boats, lawnmowers and small tractors.

• Compatible fluids: engine oil, gear oil, power steering and brake fluid.
• Vehicle types: cars, motorcycles, boats, lawn equipment, tractors.
• Four tube sizes: reach deep, narrow, or awkward reservoirs.
• 1480 mm suction hose: extended reach for larger tanks and hard-to-access ports.

How complete is the kit and what fittings come in the box?

The VEVOR kit arrives ready to use, with a 15L tank, main tube, two extension tubes, a long suction hose, a dipstick for level checks, two sealing rings, and a user manual. These components are sized to cover most service situations without buying extra adapters.

• Included: 4 gal/15L tank and main extraction tube (249 x 1000 mm).
• Extension tubes: two lengths (7 x 1200 mm and 6 x 1200 mm) for reach variety.
• Long suction hose: 8 x 1480 mm for deep or distant reservoirs.
• Accessories: dipstick, two sealing rings, and a user manual.

Is the extractor easy to use and maintain for regular service?

The workflow is straightforward: insert the appropriate tube, check levels with the dipstick, activate pneumatic or manual suction, then drain the tank into a disposal container. Routine maintenance is minimal—rinse the hoses and tubes after use and inspect seals for wear to keep suction strong.

• Four-step use: choose tube, insert dipstick, extract, and empty tank.
• Cleanup: flush hoses and wipe fittings after each job.
• Maintenance tip: replace sealing rings if suction weakens.
• Storage: keep upright and capped to prevent contamination.

Who is this for? The VEVOR 15L fluid extractor is aimed at DIY mechanics, small repair shops, fleet owners, and anyone who wants a neater, faster alternative to drain plugs and messy pan removals. It’s especially useful if you service multiple small engines or vehicles and need a versatile, portable suction solution that works with or without compressed air.