VEVOR 2 Ton Snatch Block Pulley for 3/8" Wire Rope — 3" Sheave, G80 Galvanized Chain & Swivel Shackle

VEVOR's 2 Ton Snatch Block is a heavy-duty pulley assembly with a 3-inch sheave, G80 2-foot chain, and a swivel shackle made for towing, winching, and vehicle recovery.

This snatch block combines a high-strength alloy steel body, a corrosion-resistant galvanized G80 chain, and a smooth-bearing 3" sheave to increase pulling power and change rope direction safely. Designed to mate with 3/8" wire rope, the unit gives operators a compact, single-person solution for redirecting loads, reducing line strain, and improving mechanical advantage during towing and hauling tasks.

How much load can this snatch block handle?

The snatch block has a rated working load limit of 2 tons (4,400 lbs) and a tested break load of approximately 10,000 lbs (4.5T). Those ratings make it suitable for commercial rollback wreckers, flatbed towing, and many heavy-duty recovery scenarios when used within stated limits.

• Working load limit: 4,400 lbs (2.0 tons)
• Minimum break load: ~10,000 lbs (4.5 tons)
• Designed for 3/8" (approx.) wire rope compatibility
• 3" sheave diameter to guide and protect the rope

Can I use this with my winch and wire rope on a rollback wrecker?

Yes — it’s built to integrate with standard winch systems and 3/8" wire rope commonly used on car carriers and tow trucks. The side-opening pulley makes threading or replacing rope fast, and the groove profile keeps the cable centered to minimize abrasion during repeated use.

• Side-access design for quick rope installation and inspection
• Grooved sheave reduces rope slippage and wear
• Works with typical winch line diameters used on rollbacks
• Galvanized chain resists rust from outdoor exposure

How does the swivel shackle and chain improve rigging flexibility?

The swivel shackle rotates 360°, and the chain ring pivots up to 180°, so you can adjust the pull direction without twisting the rope or repositioning the vehicle. This flexibility reduces stress on anchor points and makes it easier to find optimal rigging angles in confined or awkward recovery situations.

• 360° rotating shackle prevents line twist
• 180° swivel ring for variable pull angles
• Reduces side-loading on the sheave and rope
• Improves setup speed in tight spaces

What materials and construction features ensure durability?

The pulley housing and sheave are forged from high-strength alloy steel and heat-treated for fatigue resistance. The G80 chain is galvanically coated to slow oxidation, and the sealed-bearing style sheave promotes smooth operation under sustained loads.

• High-strength alloy steel body with heat treatment
• Galvanized G80 chain for corrosion resistance
• Smooth bearings for stable, low-friction lifting
• Wear-resistant surfaces to extend service life

Who is this for? Tow operators, recovery technicians, fleet maintenance teams, and serious DIYers who need a compact, robust snatch block to redirect winch lines, increase mechanical advantage, and perform dependable lifts. If you run a rollback wrecker, car carrier, or frequently perform off-road recoveries and heavy hauling, this VEVOR pulley assembly provides a durable, easy-to-rig solution for safer, more efficient pulls.