VULCAN axle tie-down straps 2" x 22" 4-pack — Classic Yellow with Cordura wear pad, 3,300 lb SWL

These VULCAN axle straps are heavy-duty 2" x 22" tie downs with a cordura wear pad, rated 3,300 lb safe working load, built for securing vehicles by the axle or rim in low-clearance situations.

Whether you're loading cars onto a flatbed, transporting project vehicles, or moving low-clearance machinery, the right axle strap prevents movement and protects finishes. VULCAN's four-pack of classic yellow axle straps combines robust 1-ply webbing with a full-body wear pad and heavy-duty D-rings so you can loop around axles or feed through rims and attach nearly any tensioning device. These straps are engineered to balance strength, abrasion resistance, and ease of use for professional and DIY haulers alike.

How do these straps attach to an axle or rim?

Attach the strap by looping it around the axle or feeding it through the rim and then bringing the D-rings together. The large D-rings accept snap hooks, grab hooks, J-hooks, T-hooks, or even chain, allowing you to pair the strap with your preferred ratchet or load binder quickly.

• Loop design fits around axles or through wheel rims for low-clearance vehicles
• Heavy-duty D-rings accept multiple hook types and chains
• Use with ratchets, binders, or chain tensioners for secure transport

What makes the wear pad and webbing durable?

The straps use 1-ply, 2" yellow webbing designed for flexible strength and long life, while a full-body cordura wear pad adds an extra layer of abrasion resistance. That combination reduces friction against metal surfaces and helps prevent strap deterioration and accidental scratching of finishes during loading and hauling.

• 2" wide single-ply webbing for consistent strength and flexibility
• Cordura wear pad covers the contact area for abrasion protection
• Bright yellow webbing improves visibility during rigging and inspection

Are these straps compliant and suitable for professional use?

Each strap is rated with a 3,300 pound safe working load and produced to meet DOT and CVSA specifications, fitting the expectations of professional truck, trailer, and auto-hauler operations. VULCAN has a long history in vehicle tie-down manufacturing, and these axle straps are built to the same standards relied upon in commercial transport.

• 3,300 lb safe working load per strap for regulated applications
• Manufactured to DOT and CVSA specification standards
• Designed for repeated professional use on flatbeds and auto haulers

How do I use these straps safely and avoid damage to the vehicle?

Position the wear pad where the strap contacts metal, avoid sharp edges, and route the webbing to keep tension evenly distributed. Use appropriate tensioning devices and inspect straps and hardware for wear or damage before each trip to maintain secure and safe loads.

• Place the cordura pad against the rim or axle to minimize scratches
• Keep webbing away from sharp corners and hot exhaust components
• Inspect D-rings, stitching, and webbing before every use

Who is this for: These VULCAN axle straps are aimed at professional haulers, car transport operators, flatbed drivers, and weekend DIYers who move vehicles with low ground clearance. If you need a compact, visible, and compliant tie-down that loops around axles or through rims, offers abrasion protection, and pairs with a variety of hooks and tensioners, this four-pack gives you durable, transport-ready straps for routine vehicle securement.