WOUDY 1000W Inverter Charger for RVs PD9260C — 60A Intelligent Lead‑Acid Charger, Multi‑Stage & Protections

If you need a single unit that converts DC to AC while also keeping your RV battery healthy, the PD9260C merges a powerful 1000W inverter with a 60‑amp multi‑stage charger. It actively monitors battery condition and load, shifts to float maintenance when full, and includes protections against common electrical faults. Designed for 105–130VAC input and typical 12V battery banks, this unit replaces like‑sized PD9260 series models and supports a range of lead‑acid battery types.

How quickly will this unit recharge my RV battery?

The PD9260C delivers up to 60 amps in bulk/absorption and charges at approximately 14.4V when the battery requires rapid replenishment. Once charging completes, it drops to a 13.6V float to prevent overcharge and extend battery life. The three‑stage charging curve (bulk, absorption, float) balances speed with battery health.

• Bulk/absorption peak: up to 60A at ~14.4V for fast recovery
• Float maintenance: automatic 13.6V hold after full charge
• Three‑stage algorithm for longevity and efficient replenishment

Will it work with my battery type and existing setup?

This charger is tuned for lead‑acid family chemistries, including standard flooded, AGM, and GEL styles commonly used in RV systems. It can directly replace similar PD9260 series units, with higher current models offering faster charge rates. Check your bank voltage and connector compatibility before installation.

• Compatible with Lead‑Acid, AGM, and GEL battery types
• Designed for nominal 12V battery banks and >12.6V DC loads
• Swap‑in replacement for PD9260C/PD9260CV models of comparable size

What safety and convenience features does it include?

Safety functions protect both batteries and connected equipment: over‑voltage, under‑voltage, short‑circuit, and reverse‑polarity protections are integrated. The cooling fan is thermostatically controlled so it runs only when necessary, lowering noise and wear. The unit also regulates output to supply connected loads at around 13.6V when in float mode.

• Comprehensive electrical protections to reduce risk of damage
• Automatic fan control for quieter operation and longer lifespan
• Maintains DC output to power loads while protecting the battery

How does the inverter performance support onboard appliances?

The built‑in inverter provides 1000W continuous AC output, adequate for common RV appliances and electronics like small microwaves, lights, pumps, and chargers. The unit accepts household AC input of 105–130VAC at 50/60Hz and supports DC output operation for loads above 12.6V. For heavy or surge‑intensive equipment, verify combined wattage before use.

• 1000W inverter rating for typical RV appliances and electronics
• Accepts 105–130VAC input and supports 50/60Hz operation
• Can handle loads when DC voltage is above ~12.6V

Who is this for: The WOUDY PD9260C suits RV owners, vanlifers, and mobile operators who want a compact, reliable inverter/charger that balances fast recharge with battery care. It's aimed at users with 12V lead‑acid battery banks who need uninterrupted AC power and automated maintenance charging, plus integrators replacing like‑sized PD9260 series hardware. If you rely on household appliances, lighting, or critical 12V loads while offshore of shore power, this unit provides a practical blend of power, protection, and quieter operation.