Xuhal LED Load Resistor Kit 50W 6Ω — 20-Pack Resistors with 40 T-Taps, Black bulk kit for turn signal hyper-flash fix

The Xuhal 50W 6Ω LED load resistor kit is a bulk solution to correct rapid or non-flashing LED turn signals by adding the proper load to your vehicle's circuit.

Upgrading to LED bulbs can improve brightness and efficiency, but many vehicles detect bulbs by electrical load and may register hyper-flashing, no-flash faults, or dashboard bulb warnings. This Xuhal kit provides 20 alloy resistors (each rated 50 watts, 6 ohms) plus 40 T-tap connectors so you can add the necessary load across LED turn signal circuits and restore normal flash behavior. The resistors ship in black alloy housings designed for durability and heat dissipation; they are intended to be mounted on metal surfaces to manage temperature during operation.

How will these resistors fix my LED turn signal problems?

Many vehicle systems expect the higher current draw of incandescent bulbs; LEDs draw much less, which can trigger fast-flash or error indications. Installing a resistor in parallel with the LED increases the circuit's load to mimic the original bulb draw, letting the flasher relay and vehicle electronics operate as designed.

• Adds a 50W/6Ω load per resistor to match incandescent current draw.
• Installed in parallel with each LED bulb to normalize flash rate.
• Helps clear dashboard bulb-out warnings on many makes and models.

How do I install an Xuhal 50W 6Ω resistor safely?

Installation is straightforward but requires care because the resistors get hot. Attach one resistor lead to the turn signal's positive feed and the other to a solid ground; secure the resistor body to a metal surface to dissipate heat and keep it away from plastics and hoses.

• Use the included T-tap connectors for quick splicing to positive wires.
• Mount the resistor to bare metal with a bolt or screw for heat transfer.
• Keep the unit clear of plastic panels, fuel lines, and wiring bundles.

How many resistors and connectors are in the kit and what vehicles are they for?

This package contains 20 load resistors and 40 T-tap wire connectors — enough for multiple bulbs or to service several vehicles. The resistors are universal electrical components and work with most 12V automotive LED turn signals, parking, running, and license lights, though wiring layout and relay types vary by car.

• 20 x 50W, 6Ω alloy resistors in black finish included.
• 40 x T-tap connectors to expedite wiring without cutting factory wires.
• Designed for 12V systems and common LED turn signal applications.

Who this kit is for: If you have converted to LED turn signals and are seeing rapid flashing, no flash, or dashboard bulb warnings, this Xuhal kit is a cost-effective bulk option for DIY installers, mechanics, or fleet maintenance teams. It suits anyone needing multiple resistors for a full-vehicle conversion, spare parts, or to share across projects. Note that resistors become hot during use — choose a proper metal mounting point and follow basic electrical safety. Avoid use near heat-sensitive components and keep away from children due to small parts.