PQY

The PQY 6-port vacuum block intake manifold is an anodized aluminum boost manifold that supplies six 1/8NPT vacuum outputs for gauges, controllers, and fuel/ignition devices. This compact vacuum manifold centralizes turbo or intake vacuum sources into a single, robust block. Machined from aluminum and...

The PQY Baffled Oil Catch Can Kit is a compact, universal two-port aluminum oil separator with a 50-micron bronze filter and convenient drain valve that captures oil blow-by before it reaches the intake system. Engineers and tuners use a catch can to stop oil,...

PQY 2pcs door lining bushings are direct-fit polymer replacements designed to reduce door rattle and tighten the door mounting on all Mazda Miata generations (NA, NB, NC, ND). If your MX-5 door feels loose, misaligned, or makes noise over bumps, these PQY bushings offer...

The PQY Baffled Oil Catch Can Kit is a compact, universal two-port aluminum reservoir that traps oil and vapor before they reach the intake, helping keep intercoolers and intake systems cleaner. This CNC-machined catch can from PQY is designed to be a compact, service-friendly...

PQY’s 36-inch stainless braided LS swap throttle cable kit provides a durable, no-bind throttle connection engineered for Chevy LS1 swaps and 4.8/5.3/6.0L applications. This kit is built to replace or upgrade factory linkages during engine swaps, custom builds, or performance projects. It pairs a...

PQY Universal Spark Plug Gap Gapping Tool is a compact, aluminum hand tool that lets you set accurate spark plug gaps using a 32-blade feeler gauge for most standard 10mm–16mm plugs. Whether you’re tuning a motorcycle, lawnmower, ATV or car, a correct spark plug...

PQY Universal Spark Plug Gap Gapping Tool is a compact red aluminum adjuster with a 32-blade feeler gauge designed to set accurate spark plug gaps for most standard 10–16mm plugs. This lightweight hand tool combines a knob-driven gapper and a detachable 32-blade feeler gauge...

PQY's universal spark plug gap tool is a compact aluminum gapping device paired with a 32-blade feeler gauge that lets you set precise spark plug gaps for most 10–16mm plug threads (not 18mm). If you service engines at home, in a garage, or on...

PQY 24" Universal stainless braided throttle cable kit is an adjustable, cut-to-fit accelerator cable assembly designed to replace worn plastic-sleeved throttle cables for cars, go-karts and custom projects. This universal kit from PQY provides a durable stainless-steel inner wire with a braided outer housing...

PQY's LS coolant steam port crossover hose kit is a complete aluminum and braided-hose solution that vents trapped steam and improves coolant circulation on GM LS-series engines. This kit is engineered for GM LS-family blocks (LSX, LS1, LM7, LQ4, LS6, LQ9 and similar) to...

PQY Truck Tonneau Cover Replacement Accessory is a replacement clamp and hardware kit designed to restore fit and function to hard tri‑fold and quad‑fold tonneau covers without drilling. If your hard tri‑fold or quad‑fold truck bed cover has loose, missing, or damaged clamps, this...

PQY's CNC-machined Valve Spring Compressor lets you compress and release valve springs and retainers on Honda/Acura K-series heads quickly and safely, whether the head is on or off the block. This compact, anodized aluminum tool is built for technicians and DIYers working on K20,...

The PQY Universal T304 Stainless Steel E‑VAC Scavenger Kit is a complete e‑vac fitting set designed to reduce crankcase pressure and support vacuum levels on performance and custom engines. This stainless steel E‑VAC kit from PQY combines durable T304 construction with a compact, universal...

PQY Spark Plug Wire Loom Holders are aluminum wire-management brackets designed to organize and protect spark plug wires on Chevy Small Block (262–400) V8 engines, keeping wires away from headers and heat. These linear spark plug wire looms from PQY are made specifically for...

PQY spark plug wire loom holders are aluminum, adjustable brackets made to organize and protect spark plug wires on Chevy small block V8 engines (262–400 SBC), keeping wires away from headers and high heat. If you run a Chevy small block SBC (1959–1986) and...

PQY Outboard Trim Tilt Pin Wrench Set (MT0004, MT0006, MT0009) is a three-piece, CNC-machined steel tool kit designed to safely remove and install hydraulic trim/tilt and steering end caps on Yamaha, Suzuki, Johnson and Evinrude outboards. This precision-made set brings professional-grade durability and fit...

PQY 17-2530 is a black anodized aluminum 2-inch remote fuel filler neck kit with billet cap and weld-on bracket for routing fuel fill outside the cabin. This remote filler neck kit lets you mount a fuel fill point away from the tank so custom...

PQY's 1-inch red aluminum throttle body spacer increases off-idle torque and refines the air charge for smoother throttle response on compatible 2.5L and 4.0L Jeep engines. If your Jeep TJ, YJ, LJ Wrangler or XJ Cherokee runs a 2.5L or 4.0L gasoline engine with...

PQY's polished stainless steel radiator coolant overflow "puke" tank is a 3"×10" 32-ounce reservoir designed to catch excess coolant and protect your cooling system from spills. This compact overflow tank provides a durable, corrosion-resistant container for expanding coolant as engines heat up. Made from...

The PQY 3" quick‑release aluminum V‑band clamp is a removable, high‑pressure intercooler/turbo inlet connector that creates a reliable, leak‑resistant union for custom intake and charge‑air piping. If you build or service turbo, supercharged, or custom intake systems, this PQY quick‑release V‑band clamp flange gives...

PQY's EFI fuel pressure regulator kit is an adjustable, return-style regulator with AN8 feed, AN6 return ports and a 0-160 PSI gauge for precise fuel pressure control on EFI and E85 systems. This compact kit provides a durable, serviceable solution for controlling fuel pressure...

PQY's 6AN power steering hose kit provides a durable, ready-to-install plumbing solution for Chevy C10 LS engine swaps using GM Type 2 power steering pumps. Swapping an LS motor into a classic Chevy C10 often requires updating the power steering plumbing to match modern...

The PQY LS Coolant Crossover Steam Vent Kit is a 4-port stainless and aluminum steam relief line system engineered to route pressure and steam away from LS-series intakes for safer cooling-system operation. If your LS1/LS2/LS3/LS6/LS7/LS9/LSX engine setup lacks a clear steam path under the...

PQY's billet aluminum easy-fill fuel cell gas cap is a CNC-machined 6061 screw-down replacement designed to fit 12-bolt fuel cells and seal reliably with the included rubber gasket. This precision-machined fuel cell cap replaces stock plastic flip-top caps with a durable twist-on aluminum design...

PQY's billet aluminum easy-fill fuel cell gas cap is a screw-down replacement cap for 12-bolt fuel cells that offers a durable metal alternative to plastic caps and includes a 12-hole flange and rubber gasket for improved sealing. Swap out flimsy plastic filler caps for...

PQY's AN6/AN8/AN10 inline fuel filter is a removable, billet-aluminum filter with a 10-micron stainless steel element engineered for gasoline, diesel, ethanol (E85) and methanol fuel systems. This compact inline unit fits AN6, AN8 and AN10 connections and includes a black anodized housing, stainless-steel filtration...

PQY Front Brake Line Lock Kit is a heavy-duty solenoid valve system that locks front brakes to hold your vehicle at the line or on a hill for controlled launches and burnouts. This compact, race-focused kit installs into 12–24V systems and gives drivers simple...

PQY’s adjustable EFI fuel pressure regulator is a billet-aluminum, tunable unit that controls fuel rail pressure from 3 to 70 PSI for street, race, and E85 setups. This regulator kit delivers a precise, user-adjustable solution for fuel systems that require an external regulator with...

PQY Cylinder LS Head Studs Bolts Kit replaces factory head bolts for Chevy 2004–2019 5.3L and 6.0L engines, providing a durable stud-and-nut fastening system engineered for stronger clamping and easier service. This PQY 12-point head stud kit is built for modern LS-series Chevrolet engines...

PQY AN6 power steering pump hose lines fitting kit is a complete retrofit solution to connect LS-series power steering pumps to racks, gearboxes and reservoirs for GM LS1/LS3 swaps. When swapping an LS engine into older cars, adapting the power steering plumbing is a...

PQY Cylinder LS Head Studs Bolts Kit is a complete 12-point head-stud and bolt set engineered to replace worn or corroded fasteners on Chevy LS engines from 1997–2003, including 5.3L and 6.0L applications. When a cylinder head is removed or factory head bolts show...

PQY Adjustable EFI Fuel Pressure Regulator Hose Kit is a billet-aluminum, return-style regulator that lets you set fuel pressure between 3 and 70 PSI and includes braided lines, fittings and a gauge. This complete EFI fuel pressure regulator kit from PQY is built for...

Compact adjustable EFI fuel pressure regulator kit for return-style systems, tunable from 3 to 70 PSI with AN fittings and braided lines. This PQY kit supplies an all-in-one solution for modern EFI engines that need a tunable, return-style fuel pressure regulator. Built from CNC-machined...