-
Vendor:Moalaok
Moalaok Trailer Jack Drill Adapter for 1-inch Drive Shaft — 304 Stainless Steel, includes 1/2-inch Socket Bits
Convert a standard cordless drill into a fast, reliable trailer jack driver for 1-inch drive shafts. This Moalaok adapter lets you power your trailer jack using ordinary cordless drills and drivers, removing the need for manual cranking. Built from 304 stainless steel and supplied...- $53.91
- $53.91
- Unit price
- per
-
Vendor:DGZMJJ
DGZMJJ Stainless Steel Trailer Jack Drill Adapter for 1" Drive Shaft — 3.5" Standard Length, Heavy-Duty, 1/2" Square Drive Socket
DGZMJJ Stainless Steel Trailer Jack Drill Adapter converts a compatible 1-inch drive shaft into a drill-operated jack connector for faster, easier trailer lifting. This heavy-duty adapter is designed specifically for standard-length 1-inch drive shafts on scissor and tongue trailer jacks up to 12,000 lbs...- $52.51
- $52.51
- Unit price
- per
-
Vendor:Caravista
Caravista RV Leveling Block Top Covers — 4-Pack 8.5" Non-Slip HDPE Caps for Trailer Jacks, Interlocking Weather-Resistant
Caravista RV Leveling Block Top Cover is a set of four interlocking, non-slip HDPE caps that sit atop trailer leveling blocks to prevent jacks and stabilizers from sinking or sliding. Camping on uneven ground becomes easier when small details work reliably. These top covers...- $62.95
- $62.95
- Unit price
- per
-
Vendor:Chanvoo
Chanvoo RV Electric Tongue Jack Cover — 18×9×7.5in Zippered Waterproof Protector with Clear Control Window
Chanvoo's RV electric tongue jack cover is a zippered, waterproof protector made from Oxford cloth and mesh that shields your trailer jack from sun, moisture, dirt and wear while allowing easy access to controls and lights. Keeping the tongue jack clean and dry preserves...- $54.60
- $54.60
- Unit price
- per
-
Vendor:Moalaok
Moalaok Trailer Jack Drill Adapter for Top Wind Jacks — 304 Stainless Steel, 1/2" Drive Kit
Moalaok Trailer Jack Crank Handle Power Drill Adapter converts a Top Wind trailer jack into a fast, drill-powered lift using a 1/2" drive socket—built from 304 stainless steel for lasting outdoor use. Swap slow manual cranking for a quick, reliable drill-driven solution engineered for...- $56.69
- $56.69
- Unit price
- per
-
Vendor:AR-PRO
AR-PRO Jack Wheel Chock Stabilizer for 6" Single Jack Wheel — Nitrile Rubber, Anti-Sink & Drainage
The AR-PRO Jack Wheel Chock Stabilizer is a heavy-duty nitrile rubber dock designed to protect and steady 6" single jack caster wheels by spreading weight, preventing sinking, and stopping sideways movement. When parking a caravan, RV, boat trailer or camper, a small, well-designed wheel...- $52.51
- $52.51
- Unit price
- per
-
Vendor:FBULWSEC
FBULWSEC RV Electric Stabilizer Jack Switch 387874 with Harness — IP66 Waterproof, OEM Fit for Lippert High-Speed Jacks
The FBULWSEC 387874 electric stabilizer jack switch with harness is a waterproof, drop-in replacement switch designed to control Lippert high-speed power stabilizer jacks for RVs, fifth wheels and trailers. When a worn, cracked or unresponsive jack switch leaves you struggling to level your RV,...- $54.60
- $54.60
- Unit price
- per
-
Vendor:iSaddle
iSaddle Dual Trailer Jack Wheel Dock — 6" Nitrile Rubber Double-Wheel Stabilizer, Non-Slip Drain
iSaddle Dual Trailer Swirl Jack Caster Double Wheel Dock Chock Stabilizer is a heavy-duty 6" nitrile rubber wheel dock that prevents jack wheel sinking, rolling, and sideways movement on soft or uneven ground. If you use a trailer, RV, boat or pop-up camper, stabilizing...- $54.60
- $54.60
- Unit price
- per
-
Vendor:Camco
Camco EAZ-Lift Electric Tongue Jack Head Cover — 18" x 7.5" x 8.5" Water-Resistant, Breathable with Drawstring
Camco's EAZ-Lift Electric Tongue Jack Head Cover is a three-layer, water-resistant and breathable protective cover made to shield your trailer’s electric tongue jack from rain, dirt and UV exposure. If you store or tow your trailer regularly, the jack head is exposed to weather,...- $54.60
- $54.60
- Unit price
- per
-
Vendor:Linone
Linone Trailer Jack Drop Leg Adjustable 13" Galvanized Foot Pad — 5" Base, Fits 2" ID Jacks
Linone Trailer Jack Drop Leg is a 13" adjustable galvanized jack foot pad that fits jacks with a 2" inner diameter and adds up to 10" of stable support with a 5" base. If you wheel a camper or utility trailer, a secure jack...- $73.19
- $73.19
- Unit price
- per
-
Vendor:Jeremywell
Jeremywell 6" Swivel Trailer Jack Wheel Caster — 6in Removable Zinc-Plated, 1,200 lb Capacity, Lock Pin for 2" A-Frame Jacks
The Jeremywell 6" swivel trailer jack wheel is a removable, zinc-plated caster designed to replace A-frame jack wheels and support up to 1,200 lbs with a lock pin for secure attachment. If you need a sturdy replacement wheel for a boat trailer, camper, or...- $67.04
- $67.04
- Unit price
- per
-
Vendor:TRILVIX
TRILVIX Trailer Jack Drill Adapter for 1" Drive Shaft — Stainless Steel Kit with 1/2" Socket Adapter & Storage Box
TRILVIX Trailer Jack Drill Adapter converts a 1" jack drive shaft into a drill-operated jack for faster, low-effort raising and lowering of compatible trailers. This compact kit is built to make trailer setup and teardown quicker for RVs, campers, utility trailers and dump trailers...- $56.69
- $56.69
- Unit price
- per
-
Vendor:BOYISEN
BOYISEN RV stabilizer jack pads rubber leveling blocks 8.5 in, 2-pack — non-slip, UV-resistant
BOYISEN RV Stabilizer Jack Pads are durable, flexible rubber pads that protect landing feet and improve stability on soft or uneven ground. These 8.5-inch rubber leveling blocks come as a 2-pack and are made from recycled, UV- and water-resistant material. Designed to sit under...- $67.12
- $67.12
- Unit price
- per
-
Vendor:Camco
Camco RV Leveling Blocks 4-Pack — Stackable Interlocking UV-Resistant Blocks with Zippered Carry Bag
Camco Camper/RV Leveling Blocks are a stackable, interlocking 4-pack of heavy-duty resin blocks that let you build a stable, adjustable base to level and support RV wheels and jacks. Whether you're setting up at a gravel site, sloped pull-through, or soft grass, these leveling...- $65.56
- $65.56
- Unit price
- per
-
Vendor:HVJ
HVJ Trailer Jack Drill Adapter for 1-inch Jack Shaft — Stainless Steel, Drill & Ratchet Compatible
HVJ's Trailer Jack Drill Adapter converts a 1" jack drive shaft into a drill- or ratchet-operated jack so you can raise and lower trailers quickly and without hand cranking. This stainless-steel adapter kit fits 1-inch jack drive shafts and includes sockets, clevis pins, cotter...- $58.69
- $58.69
- Unit price
- per
-
Vendor:TOWKING
TOWKING Trailer Jack Drop Leg Extension for 2" ID Tube — 13" Height, 5" Footplate, 2,000 lb Rated
TOWKING's Trailer Jack Drop Leg is an adjustable, galvanized steel foot extension that boosts stability and makes hitching easier for trailers up to 2,000 lbs. If you need extra ground clearance or a wider, sturdier base for your trailer jack, this drop leg extension...- $69.21
- $69.21
- Unit price
- per
-
Vendor:LVACODV
LVACODV Bottle Jack Adapter Axle Saddle for 2/3/4" Round & 2" Square Tubes — 17,000 lb Capacity, 1/4" Alloy Steel (Red)
LVACODV Bottle Jack Adapter is a heavy-duty axle saddle that secures bottle jacks to 2", 3", and 4" round axles and up to 2" square tubes, providing stable lifting support up to 17,000 lbs. This bolt-on axle cradle converts a standard bottle jack into...- $56.48
- $56.48
- Unit price
- per
-
Vendor:JIANBENKJ
JIANBENKJ Bottle Jack Axle Adapter Saddle — fits 2, 3, 4‑inch round & 2‑inch square tubes, 12‑ton alloy‑steel stability
JIANBENKJ Bottle Jack Axle Adapter Lifting Saddle is a heavy‑duty cradle that lets a standard bottle or floor jack safely and securely lift 2", 3", and 4" round axle tubes and 2" square axle tubes up to 17,000 pounds. This compact alloy‑steel adapter converts...- $58.77
- $58.77
- Unit price
- per
-
Vendor:FHRHRY
FHRHRY Fifth-Wheel Landing Gear Quick Release Pull Pins 2-Pack 3/8" Silver, Spring-Loaded OEM Fit
These FHRHRY LC308287 quick release pull pins are a pair of OEM‑style 3/8" diameter replacement pins designed to secure and adjust fifth‑wheel RV landing gear quickly and reliably. If a worn, bent, or missing pull pin is making your landing gear loose or slow...- $60.21
- $60.21
- Unit price
- per
-
Vendor:ONYUOKU
ONYUOKU 308287 Fifth Wheel Quick Release Pull Pins — 2-Pack 3/8" Zinc-Plated Spring-Loaded Replacement for Landing Gear
These ONYUOKU 308287 quick-release pull pins are a two-piece replacement set that lets you raise and lower fifth-wheel landing gear quickly and securely with a standard 3/8" pin diameter. Designed as a direct-fit replacement for LC308287, this pair of heavy-duty quick release pull pins...- $60.23
- $60.23
- Unit price
- per
-
Vendor:XIANGZI
XIANGZI Trailer Jack Wheel Replacement 6" x 2" Poly Caster for 2" Jack Tube, 1200 lb Capacity
The XIANGZI 6-inch trailer jack wheel replacement is a 6" x 2" caster that mounts to a 2" jack tube to add mobility and dependable tongue support up to 1,200 lb. If you need to move, position, or couple a boat or utility trailer...- $69.21
- $69.21
- Unit price
- per
-
Vendor:OULEME
OULEME RV Leveling Pads 8.5in Rubber 2-Pack — Non-Slip 3/4in Thick Vibration-Damping Stabilizer Mats
OULEME 8.5" Rubber RV Leveling Pads are durable, non-slip stabilizer mats that protect leveling blocks, absorb vibration, and prevent slipping under jacks and tires. Designed for RV owners who want a tougher, longer-lasting base beneath jacks, stabilizers, or parked tires, these 8.5" rubber pads...- $67.12
- $67.12
- Unit price
- per
-
Vendor:Shrandi
Shrandi Trailer Jack Drill Adapter 1-inch Drive — Stainless Steel, Fits up to 12,000 lb Jacks
The Shrandi Trailer Jack Drill Adapter is a stainless-steel 1-inch drive attachment that lets you raise and lower compatible trailer jacks quickly using a low-speed drill or a 1/2" ratchet. This compact adapter converts a standard cordless drill into a trailer jack operator, engineered...- $55.64
- $55.64
- Unit price
- per
-
Vendor:Camco
Camco RV Stabilizer Jack Pads 14 x 12 in, 2-Pack — Interlocking Heavy-Duty Resin Pads with Built-In Handle
Camco Large Stabilizer RV Jack Pads are heavy-duty, interlocking 14" x 12" base pads that stop jacks from sinking and create a stable foundation for your RV or trailer. These Camco jack pads are engineered to give your stabilizer and stack jacks a broad,...- $64.80
- $64.80
- Unit price
- per
-
Vendor:Moalaok
Moalaok Trailer Jack Drill Adapter — 1" Shaft to 1/2" Drive, Stainless Steel One-Piece, Quick Lock
Moalaok Heavy Duty Trailer Jack Drill Adapter converts a 1-inch jack drive shaft into a drill- or ratchet-ready lift tool in seconds. Designed for owners of trailers and towing rigs, this adapter replaces tiring hand cranking with a quick, secure connection that works with...- $64.83
- $64.83
- Unit price
- per
-
Vendor:Camco
Camco Trailer Jack Stand 5,000 lb Capacity — 8" Tall Yellow Polymer Base with 2 1/16" Recessed Dock
The Camco Trailer Tongue Jack Stand is a lightweight polymer support that stabilizes your trailer tongue up to 5,000 lb without bulky blocks or cinderblocks. When you need a compact, reliable platform to hold your trailer's tongue in place while parked or during hitching,...- $73.44
- $73.44
- Unit price
- per
-
Vendor:BEBOBLY
BEBOBLY Camper Leveler 2-Pack RV Leveling Blocks with Wheel Chocks, Curved HDPE Ramps & Anti-Slip Mats for Up to 35,000 lbs
BEBOBLY Camper Leveler 2-Pack is a complete RV leveling kit—curved HDPE ramps, anti-slip mats, and wheel chocks designed to safely level and stabilize campers and trailers up to 35,000 lbs. When you park on uneven ground, a stable, level rig makes sleeping, cooking, and...- $81.73
- $81.73
- Unit price
- per
-
Vendor:Lanphitus
Lanphitus Regal-Style Head Pin Assembly for Lippert Solera RV Awning — Hardened-Steel Replacement
Lanphitus Regal-style sheared drive shaft head pin assembly replaces a damaged or rusted head pin on Regal-drive RV awning heads to restore secure operation. If your Lippert Solera-compatible awning with a Regal-style drive head has a bent, broken, or corroded head pin, this hardened-steel...- $65.03
- $65.03
- Unit price
- per
-
Vendor:Moalaok
Moalaok Trailer Jack Drill Adapter 2-in-1 for 1" & 1/2" Shafts — Stainless Steel, 1/2" Socket Adapter
The Moalaok 2-in-1 Trailer Jack Drill Adapter converts a cordless or standard drill into a fast, rust-resistant crank for top-wind trailer jacks with 1" or 1/2" drive shafts. Save time and hard work when raising or lowering your trailer tongue or camper jack: this...- $71.11
- $71.11
- Unit price
- per
-
Vendor:Vacallity
Vacallity RV trailer jack block 1-pack — HDPE stabilizer pad, 9.3x6.9in anti-slip, 16,000 lb capacity
Vacallity RV Trailer Jack Block is a single high-density polyethylene stabilizer pad designed to support and steady trailer jacks, tongue jacks, and leveling equipment for safer, more reliable campsite setup. When you park your RV, a dependable jack block stops sinking, tilting, or slipping...- $74.63
- $74.63
- Unit price
- per
-
Vendor:rockane
rockane 6" Trailer Jack Swivel Caster Wheel Replacement — Black, Dual 6" Poly, 1,200 lb Capacity
Rockane’s 6" black swivel caster is a heavy-duty trailer jack wheel replacement that fits 2" diameter jack tubes and supports up to 1,200 lbs for smooth, reliable trailer positioning. This replacement swivel caster wheel provides a simple, durable solution for moving and stabilizing trailers,...- $75.47
- $75.47
- Unit price
- per
-
Vendor:AR-PRO
AR-PRO Hi-Lift Jack Base 11.5x11.5 in – Heavy-Duty Red Stabilizer for 4.1x7in Jack Pads, Non-Slip Traction
AR-PRO's 11.5" x 11.5" Hi-Lift Jack Base stabilizes off-road and farm jacks so they no longer sink in mud, sand, gravel, or snow. When you’re working off-road or on soft ground, a jack that punches through the surface is more than an annoyance —...- $77.55
- $77.55
- Unit price
- per
-
Vendor:TRILVIX
TRILVIX Trailer Jack Drill Adapter for 1-inch Drive Shaft — Stainless Steel, Drill/Ratchet/Wrench Compatible
TRILVIX Upgraded Trailer Jack Drill Adapter is a heavy-duty stainless steel kit that lets you power your 1-inch trailer jack with a drill, ratchet or wrench for faster, smoother lifting and lowering. Move from hand-cranking to powered lifting in seconds with this purpose-built adapter....- $62.95
- $62.95
- Unit price
- per
-
Vendor:JURPLIX
JURPLIX 6" Trailer Jack Block RV Leveling Pad — 6-inch Lift, 10,000 lb Capacity, Includes Carry Bag
JURPLIX 6" Trailer Jack Block is a heavy-duty RV leveling and stabilizer pad that lifts and supports your trailer jack, post or scissor foot for faster, safer leveling on uneven or soft ground. Whether you're setting up at a rocky campsite, a muddy pull-through,...- $80.68
- $80.68
- Unit price
- per
-
Vendor:TOWKING
TOWKING 4.3" Trailer Jack Block 12000 lb Capacity — 4.3" Height, UV-Stable Polypropylene with Anti-Tilt Base
TOWKING's 4.3" H 12000lbs Trailer Jack Block is a rugged, UV-stabilized polypropylene leveling block engineered to support heavy trailer jacks and stabilize RVs quickly and safely. Whether you're parking for the night at a campground or setting up at a remote site, a dependable...- $71.29
- $71.29
- Unit price
- per
-
Vendor:PAULINN
PAULINN RV Camper Levelers 2-Pack — Heavy-Duty Curved Leveling Blocks with Anti-Slip Mats & Carry Bag, Supports Up to 35,000 lb
PAULINN RV Camper Levelers are a two-pack of heavy-duty curved leveling blocks and chocks that quickly stabilize trailers, campers, vans and SUVs without trimming, supporting up to 35,000 lbs and tires up to 32". When you need a fast, secure way to level your...- $83.81
- $83.81
- Unit price
- per
-
Vendor:Green living
Green living RV Level Gauge 2-Pack — Brass 0–10° Bubble Inclinometer, Adhesive Mount & Weather‑Resistant
Green living's 2 Pack RV Level Gauge is a compact brass inclinometer that shows 0–10° tilt at a glance so you can level campers, trailers, boats and SUVs quickly and reliably. Keep your camper stable and comfortable with a simple visual tool built for...- $62.95
- $62.95
- Unit price
- per
-
Vendor:HOXWELL
HOXWELL Wheel Chocks 2-Pair Green — Heavy-Duty Non-Slip UV-Resistant Stoppers for RVs & Trailers
HOXWELL 2 Pair Wheel Chocks are heavy-duty, bright green triangular stoppers that hold two wheels at once to prevent vehicle roll during parking, loading, or maintenance. Engineered from UV-inhibited polypropylene, these compact wheel chocks combine a rigid triangular form, textured grip surfaces, and a...- $77.55
- $77.55
- Unit price
- per
-
Vendor:VEVOR
VEVOR RV Trailer Jack Block 6" High — Heavy-Duty 6000 lb RV Leveling Block with Non-Slip Base
VEVOR Trailer Jack Block: a 6-inch heavy-duty RV leveling block that supports up to 6,000 lbs per block to stabilize jacks, trailer stands, and camper supports on soft or uneven ground. When you park a travel trailer, fifth wheel, or motorhome on gravel, sand,...- $81.54
- $81.54
- Unit price
- per
-
Vendor:CircleRoad
CircleRoad Trailer Jack Block — 11.22×11.22 in Camper Jack Pad, 4in Tall UV-Resistant Heavy-Duty Support (10,000 lb)
CircleRoad Trailer Jack Block is a durable, UV-resistant camper jack pad that gives stable, wobble-free support for a single trailer jack and holds up to 10,000 lbs. When you park a trailer, stability starts at the base. This heavy-duty jack pad from CircleRoad is...- $71.29
- $71.29
- Unit price
- per
-
Vendor:TOWKING
TOWKING Trailer Jack Swivel Caster 6" Spoked Wheel — 1500 lb Capacity, Powder-Coated
The TOWKING 1500lbs 6" Trailer Jack Swivel Caster is a heavy-duty replacement wheel assembly that converts 2" jack tubes into a smooth, maneuverable caster with a spoked 6x2" wheel and corrosion-resistant finish. Replace a worn jack wheel or add greater mobility to your trailer...- $79.64
- $79.64
- Unit price
- per
-
Vendor:OULEME
OULEME RV Leveling Pads 8.5" Rubber 2-Pack — 12x12" Non‑Slip Stabilizer Mats, Shock‑Absorbing
OULEME 8.5" rubber RV leveling pads are heavy-duty non-slip stabilizer mats sold as a 2-pack to protect jacks, prevent tire flat-spotting, and provide shock absorption under RVs and trailers. These durable rubber pads offer a low-profile, resilient surface designed to sit under jack feet,...- $83.81
- $83.81
- Unit price
- per
-
Vendor:TOWKING
TOWKING 1500 lb Trailer Jack Swivel Caster 6in Spoked Wheel — Galvanised Steel, Fits 2in Tube
The TOWKING 1500lbs 6" Trailer Jack Swivel Caster is a heavy-duty replacement wheel assembly that converts a 2" trailer jack tube into a smooth, lockable caster for easier positioning and towing prep. Swap a worn-out jack wheel for this reinforced spoked wheel assembly to...- $77.55
- $77.55
- Unit price
- per
-
Vendor:TOWKING
TOWKING Trailer Jack Block 6" Stackable 12,000 lb Support Pad — 10" Top, Interlocking Stability
TOWKING's 6-inch trailer jack block is a stackable, heavy-duty support pad rated for 12,000 lbs that stabilizes jacks and levels campers on uneven ground. Whether you’re setting up camp on gravel, dirt, or soft turf, this rugged jack block gives a wide, non-wobble platform...- $90.07
- $90.07
- Unit price
- per
-
Vendor:CircleRoad
CircleRoad RV Levelers Heavy-Duty Wheel Ramps — Stackable 32" Tire Capacity, Non-Slip Pads
CircleRoad RV Levelers are heavy-duty polypropylene wheel ramps that lift and stabilize camper tires for safe, reliable leveling and parking. These RV leveler ramps are engineered to support large trailers, motorhomes, vans and off-road vehicles while creating an even, secure stance for camping or...- $85.90
- $85.90
- Unit price
- per
-
Vendor:Kefly
Kefly Landing Gear Repair Kit 146059 for 5th Wheel RV Lead Leg — Complete Gears, Pins & Bushings to Restore Smooth Operation
The Kefly 146059 Power Landing Gear Repair Kit is a complete replacement set engineered to restore stability and reliable operation to Lippert Venture 5th wheel front landing gear legs. When a main landing gear leg shows wear, stripped gears, or loose drive components, your...- $77.55
- $77.55
- Unit price
- per
-
Vendor:Prime 1
Prime 1 RV Leveling Blocks Kit — 2-Pack Curved HDPE Levelers with Anti-Slip Mats & Wheel Chocks, 35,000 lb Capacity
PR1ME RV Leveling Blocks are a heavy-duty, two-piece curved leveling system with anti-slip mats and wheel chocks that lets you stabilize and level travel trailers and motorhomes quickly and securely. Set up camp faster and safer with a compact 7-piece kit engineered for modern...- $91.53
- $91.53
- Unit price
- per
-
Vendor:TOWKING
TOWKING Trailer Jack Swivel Caster — 2000 lb 8" Spoked Wheel for 2" Jacks, Powder-Coated Corrosion-Resistant
The TOWKING 2000lbs 8" trailer jack swivel caster replacement is a heavy-duty, corrosion-resistant caster assembly that installs on 2" jack tubes to give your trailer smoother mobility and reliable load support. This swivel caster is engineered to convert a standard trailer jack into a...- $96.33
- $96.33
- Unit price
- per
-
Vendor:BOYISEN
BOYISEN RV Jack Stand Pads 8.5" Rubber 4-Pack — Wide Non‑Slip Stabilizer Bases, Weather‑Resistant
BOYISEN Jack Stand Pads are 8.5" recycled rubber blocks sold in a 4-pack that give RV stabilizer jacks and tires a wide, non-slip base for safer, steadier leveling and storage. When you park an RV or camper, narrow jack feet and uneven ground can...- $94.25
- $94.25
- Unit price
- per
-
Vendor:Dusledel
Dusledel 387874 12V Power Stabilizer Switch with Harness — IP66 Waterproof Rocker, Extend/Retract Labels
Dusledel 387874 Power Stabilizer Switch is a waterproof, IP66-rated 12V replacement rocker switch and harness kit that lets you extend and retract Lippert-compatible RV stabilizer jacks quickly and reliably. This replacement switch kit is built to restore or upgrade the powered stabilizer control on...- $76.66
- $76.66
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.
















































