Shocks, Struts & Suspension

Dynofit 1-3" torsion bar keys with matching shock extender brackets let you raise the front of 2020–2024 Chevy Silverado and GMC Sierra 2500HD/3500HD 4WD trucks by 1 to 3 inches while preserving factory CV geometry and improved tire clearance. If you're fitting larger tires,...

The Timbren FR1504E SES Rear Suspension Enhancement System is a bolt-on rubber suspension kit that adds up to 6,000 lb of progressive load support to reduce sag, roll, and sway without any air lines or maintenance. Designed for heavy-duty daily work and towing, the...

BocraVant 2-piece front complete strut assemblies with coil springs replace both front shock struts on 2014–2019 Nissan Sentra 1.8L (S, SL, SR, SV) for restored ride control and handling. If your Sentra’s front end feels loose, bouncy, or uneven, replacing worn struts with a...

Complete 8-piece front suspension kit engineered to replace worn control arms, ball joints, tie rod ends and sway bar links on 2007–2012 Nissan Sentra 2.0L and 2.5L models. This SCITOO kit bundles the most commonly replaced front-end components into a single purchase so you...

Rough Country 2.5–4" N3 front shocks are heavy-duty, nitrogen-charged dampers engineered to restore control and comfort for Chevy/GMC 1500 and Classic 2WD trucks lifted 2.5 to 4 inches. These front shocks from Rough Country are built for lifted Chevy and GMC half-ton trucks that...

PetMigo front lower control arms are a direct-fit suspension replacement kit with pre-installed ball joints engineered to restore steering alignment and ride stability on 2007–2016 Cadillac and GM full-size trucks/SUVs. This replacement pair (part numbers K620888 and K620889) is built for Cadillac Escalade, Escalade...

A-Premium Rear Shock Absorbers (set of 2) are replacement rear dampers engineered to restore ride control and stability for Honda Pilot 2009–2015 3.5L V6 models. If your Pilot feels bouncy, leans in corners, or the rear rides lower than it used to, worn rear...

KSP PERFORMANCE's 1.5" front leveling kit is an aluminum strut spacer system that raises the front of compatible Toyota trucks and SUVs about 1.5 inches for improved stance and tire clearance. This leveling kit is engineered for modern Toyota platforms to give your vehicle...

Aeagle front strut shock assembly pair with coil springs replaces Toyota part numbers 172114 and 172115 for 2003–2008 Corolla models, restoring ride control and front suspension stability. When the front end of your Corolla feels loose, bouncy, or noisy, swapping worn struts for a...

HAWK BROTHER front lower control arm suspension kit is a complete direct-fit replacement set for the front lower control arms and ball joints on 2011–2019 Dodge Charger, Challenger and Chrysler 300 RWD models. This kit replaces worn or damaged front lower control arms and...

Rough Country N3 rear shock absorbers deliver adjustable, heavy-duty damping engineered to support 0–3" rear lifts on 2007–2018 Jeep Wrangler JK models. The 23144_A N3 rear shocks are a purpose-built upgrade for Jeep owners who fitted a 0–3" lift and want improved ride control...

The Air Lift 25804 is a compact, dash-mounted air shock controller that lets you inflate or deflate your vehicle's air shocks from the driver's seat using a built-in compressor and pressure gauge. This all-in-one kit combines a rugged onboard air compressor, a single-needle dashboard...

Complete 6-piece front suspension and steering kit engineered to replace worn lower control arms, ball joints, sway bar end links and outer tie rod ends on 2008–2013 Nissan Rogue and 2014–2015 Rogue Select. This SCITOO kit brings together the main front suspension and steering...

Rough Country 0–3" N3 front shock absorbers deliver a tuned, durable ride upgrade for 1999–2006 Chevy/Silverado and GMC Sierra 1500 4WD trucks, engineered to handle lifted setups while improving control and damping consistency. If you’re replacing worn front shocks or building a modest 0–3"...

A pair of replacement rear suspension U-bolt plates and U-bolts engineered to secure 2.5" wide, 8.75" long leaf springs on select 1988–2000 Chevrolet, GMC and Cadillac trucks and SUVs. These iiLentes-mounted U-bolts and accompanying axle plates are replacement hardware designed to clamp the leaf...

RETRUE Rear Air Bags Suspension Kit for Silverado/Sierra 2500HD and 3500HD provides adjustable air spring support that levels heavy loads, reduces sag, and improves towing stability. Designed for 2011–2026 Chevrolet Silverado 2500HD and 3500HD and GMC Sierra 2500HD and 3500HD (2WD and 4WD), this...

These ILONPA rear complete struts replace worn shock assemblies to restore ride height, handling precision, and damping performance on compatible Jeep Patriot, Jeep Compass, and Dodge Caliber models. If your vehicle shows softer handling, increased body roll, uneven braking feel, or a rougher ride,...

PetMigo's 10-piece front upper control arm and ball joint kit is a direct-fit replacement built to restore steering alignment and front suspension performance on RWD Ford Ranger and compatible Mazda B-series trucks with coil-spring front suspension. When front-end components show wear—uneven tire wear, loose...

RETRUE Rear Air Bags Suspension Kit upgrades the rear suspension of Toyota Tundra (2007–2021) to provide adjustable load-leveling, improved stability, and customizable ride firmness. If you haul heavy loads, tow trailers, or want a firmer, more controlled rear end for your Tundra, this RETRUE...

Weonefit Front Lower Control Arm Kit (K623000 & K623001) is a direct-fit replacement assembly designed to restore front wheel control and reduce road vibration for 2013–2017 Ford Fusion and 2013–2018 Lincoln MKZ models. These two front lower control arm assemblies are built to match...

labwork 14PCS Front Lower Control Arm Suspension kit is a complete front lower-arm replacement set engineered to restore steering stability and suspension geometry on 2007–2011 USA-built Toyota Camry models. This comprehensive 14-piece kit from labwork includes the front lower control arms and related components...

FLYCLE 2-inch (50.8 mm) wheel spacer kit for 4x137 bolt patterns widens track, improves clearance, and supports larger tires on CAN-AM Defender, Outlander, Commander and compatible UTVs. These wheel spacers are a CNC-forged 6061-T6 aluminum solution designed to relocate wheels outward by 2 inches...

maXpeedingrods 5000 lbs air suspension bag kit upgrades your Dodge Ram 2500 (2003–2013) to carry, tow and level heavy loads with adjustable air support up to 5,000 pounds. This air helper spring kit is engineered to restore ride height, reduce rear squat and improve...

The Monroe DRiV Max-Air MA834 air adjustable shock absorber is a heavy-duty replacement that supports up to 1,200 lbs, preserves ride height and reduces sag for trucks hauling varying loads. Designed for drivers who need dependable, adjustable support, the Max-Air MA834 replaces factory shocks...

Rough Country's 0–1.5" N3 front shocks (model 23193_E) deliver adjustable, race-inspired damping for 2005–2024 Ford Super Duty trucks, engineered to improve ride control and stability at small lift heights. These nitrogen-charged N3 shocks are built for trucks lifted between 0 and 1.5 inches and...

RETRUE Rear Air Bags Suspension Kit for 2014–2026 RAM 2500 provides adjustable air springs that restore level ride height, improve load handling and reduce rear-end sag when towing or hauling heavy loads. This bolt-in rear air ride kit is engineered specifically for RAM 2500...

Monroe Quick-Strut 471128L is a fully assembled front suspension strut and coil spring kit engineered to restore ride height and handling on compatible Chrysler Town & Country, Dodge Grand Caravan and Volkswagen Routan models. This Quick-Strut ships preassembled from Monroe’s U.S. facility and combines...

Monroe Quick-Strut 471128R is a ready-to-install front suspension strut and coil spring assembly designed to replace the factory unit on compatible Chrysler Town & Country, Dodge Grand Caravan, and Volkswagen Routan models. This Quick-Strut arrives fully assembled so you can swap a worn strut...

ACDelco Gold 504-511 (88946598) Rear Air Lift Shock Absorber is an adjustable air-assisted rear shock designed to help level your vehicle and stabilize handling when towing or carrying temporary heavy loads. When hauling a boat, trailer or other temporary loads, suspension geometry and ride...

maXpeedingrods Adjustable Front Sway Bar End Links are a heavy-duty, zinc-coated suspension kit designed to replace factory links and provide adjustable lengths for lowered or modified BMW 3 Series models. If your BMW 3 Series (E36, E46 or E90–E93 generations) has been lowered, upgraded,...

CCIYU front complete strut assemblies are direct-fit replacements designed to restore ride control and steering stability on 2013–2018 Ford Focus models. This pair of front complete struts from CCIYU replaces the factory struts and coil springs in one unit, offering a ready-to-install solution for...

Complete rear left and right strut and coil spring assemblies for Pontiac Vibe and Toyota Matrix (2003–2008) that replace OE 171373L and 171373R and arrive ready to install. These Youxmoto rear strut and spring assemblies are built as direct-fit replacements for the specified FWD...

The maXpeedingrods Wireless On Board Air Compressor System gives you Bluetooth and remote control over your vehicle's air suspension, with a pre-assembled compressor/manifold, three programmable presets, and up to 120 psi output for reliable inflation and ride adjustment. This compact, weather-resistant on-board air compressor...

The Timbren GMRCK25D SES Rear Suspension Enhancement System is a vehicle-mounted, maintenance-free rubber secondary suspension that adds up to 8,600 lbs of load-support to reduce sag, roll, and sway while towing or hauling. If you tow heavy loads, carry payloads, or want a firmer,...

AEagle Front Left steering knuckle and wheel bearing hub assembly is a direct-fit replacement for the driver side of Honda Civic models 2006–2011 (except Si/MUGEN Si), restoring steering stability and hub support. This OE-style front left knuckle and integrated wheel bearing hub from AEagle...

AEagle front steering knuckle with integrated wheel bearing hub is a direct-fit replacement for non‑Si/MUGEN Honda Civic 2006–2011 models (1.3L and 1.8L), available for both left and right sides. Designed as a factory-style replacement, this steering knuckle and wheel-bearing hub assembly replaces worn or...

A complete 16-piece front suspension kit from HAWK BROTHER designed to replace the front control arms, tie rod ends, sway bar links and ball joints on compatible 2011–2019 Dodge Charger models. This factory-style front suspension set groups every primary front steering and lower/upper control-arm...

These dynofit upper control arms replace worn OE arms to provide a 2–4" suspension lift and improved steering geometry for 2007–2018 Silverado/Sierra 1500 and compatible GM trucks and SUVs. Restore proper front suspension alignment, reduce tire wear, and regain steering precision with this pair...

A-Premium 2-pack front upper control arms are complete replacement assemblies—each includes a pre-greased ball joint and rubber bushing engineered to match OE dimensions for Dodge Ram 1500 models (2009–2024) so you can restore front suspension alignment and road feel. These front upper control arms...

High-strength rear suspension spindle steering knuckles by KJYDXYS are direct-fit replacements engineered to restore steering stability and wheel alignment on compatible 2016–2020 Malibus and select Regal models. These rear left and right steering knuckles (spindle) are manufactured to meet original-equipment dimensions and corrosion resistance,...

Redline Tuning Hood Maxlift Plus 21-27016-02 replaces the factory prop rod on 2016–2023 Toyota Tacoma hoods, lifting the hood smoothly and holding it in a higher, more convenient position. Engineered to modernize your Tacoma’s engine bay, the Hood Maxlift Plus swaps the clumsy prop...

Aeagle's front lower control arm assemblies with preinstalled ball joints replace both driver and passenger sides to restore steering precision and suspension stability on compatible Hyundai Elantra and Veloster models. If your vehicle shows symptoms like uneven tire wear, vibration through the steering wheel,...

These two Dasbecan front strut assemblies are direct-fit replacements designed to restore steering stability and ride control for 2007–2014 Cadillac Escalades and many GM trucks and SUVs. If your Escalade or compatible GMC/Chevrolet vehicle shows sagging, uneven tire wear, nose-dive under braking, or a...

MOOG CK620054 is a direct-fit front upper suspension control arm and pre-installed ball joint assembly engineered to restore steering precision and handle heavy-duty loads on Chevrolet and GMC 2500-series trucks. This MOOG High Utilization Design part replaces worn upper control arms on heavy-duty GM...

UGFC front lower control arm kit with integrated ball joints and complete tie-rod/sway bar hardware restores steering precision and suspension stability for compatible Ford C‑Max and Focus models. This comprehensive front suspension kit was engineered to replace worn lower control arms and associated steering...

Aeagle's 6-piece front suspension kit replaces both front lower control arms, two lower ball joints and both sway bar end links for Honda CR-V models made 2002–2006. If your CR-V shows uneven tire wear, a loose steering feel, or clunking from the front suspension,...

IBESTWOLF 2PCS Rear Leaf Spring Shackle Bracket Repair Kit 722-101 replaces worn rear shackles and brackets to restore secure leaf-spring mounting on compatible 1980–1997 Ford Bronco and F‑Series trucks. This repair kit contains the hardware you need to renew the rear leaf spring shackle...

MOOG RK622216 is a complete front left lower suspension control arm and ball joint assembly engineered to restore proper alignment, steering response, and reliable handling for compatible Ford Explorers and Police Interceptor Utility vehicles. This assembled control arm combines a forged arm and a...

DEEAGLE Rear Air Bags Suspension Kit for Dodge Ram 2500/3500 is a bolt-on air helper system that restores level stance, reduces rear squat, and provides adjustable load support up to 5,000 pounds. If your Dodge Ram 2500 or 3500 sags under heavy loads, tows...

Compact dash panel that puts two independent 200 PSI air suspension gauges and paddle-valve controls in one corrosion-resistant unit for precise inflate/deflate management. This DUBANGLONG Panel Paddle Valve Switch combines dual pressure gauges, paddle-style valves, and all necessary fittings into a pre-wired dash module...