-
Vendor:weyleity
weyleity Fan Clutch Wrench Set 32mm & 36mm — 2pc 15in Long-Reach Carbon Steel with Anti-Slip Handles
weyleity 32mm & 36mm Fan Clutch Wrench Set is a two-piece, long-reach carbon steel toolkit designed to remove and install 32mm and 36mm fan clutch nuts and hold water pump pulleys with improved leverage. This heavy-duty 2-piece wrench set combines a lengthened 15" fan...- $54.60
- $54.60
- Unit price
- per
-
Vendor:weyleity
weyleity Engine Cylinder Hone 2"–6.5" Adjustable Deglazer with 220-Grit Stones, Self-Centering Shaft
weyleity's adjustable engine cylinder hone is a drill-driven deglazer sized for 2" to 6.5" bores, using three replaceable 220-grit stones to remove glaze, rust, and carbon for a smoother cylinder surface. This precision hone kit brings a flexible, self-centering shaft and a knurled tension...- $52.51
- $52.51
- Unit price
- per
-
Vendor:weyleity
weyleity Valve Stem Seal Remover & Installer Kit — 11‑Piece Alloy‑Steel Set with Case
Compact 11-piece valve stem seal remover and installer set that includes precision machined adapters and durable alloy-steel tools for accurate, repeatable valve seal replacement on overhead cam engines. This weyleity kit is designed to simplify valve stem seal jobs by combining targeted seal drivers,...- $67.12
- $67.12
- Unit price
- per
-
Vendor:weyleity
weyleity Harmonic Balancer Puller Set — 46-Piece Kit, AISI 1045 Steel & Carry Case
weyleity 46-Piece Harmonic Balancer Puller Set is a full-featured puller kit designed to remove harmonic balancers, crankshaft pulleys, steering wheels and flywheels without marring components. This comprehensive 46-piece kit groups the specialized tools needed to extract pulleys and hubs safely and efficiently. Built from...- $73.38
- $73.38
- Unit price
- per
-
Vendor:weyleity
weyleity 5 Ton 2-Way Auto Body Repair Clamp — Compact Drop-Forged 45# Steel, Self-Tightening Grip
The weyleity 5 Ton 2-Way Auto Body Repair Clamp Tool is a compact, dual-action sheet-metal clamp that delivers up to 5 tons of straight pulling force and 3 tons of top pulling power for precise auto body and frame work. This clamp combines a...- $73.38
- $73.38
- Unit price
- per
-
Vendor:weyleity
weyleity Engine Cylinder Hone Tool Adjustable 2"–7" Diameter with 220-Grit Stones, Flexible Shaft
weyleity's engine cylinder hone tool is an adjustable, drill-driven deglazer designed to clean and restore cylinder bores from 2" to 7" diameter using replaceable 220-grit stones. Restore cylinder walls, calipers and small engine bores with a single, compact hone that fits standard power drills....- $56.69
- $56.69
- Unit price
- per
-
Vendor:weyleity
weyleity Brake Line Flaring Tool Kit with Tubing Cutter — 45° Single & Double Flares for 3/16"–1/2" Tubing
weyleity’s Brake Line Flaring Tool Kit creates precise 45° single and double flares for 3/16" to 1/2" soft-metal tubing, giving tight, leak-resistant connections for brake, fuel, and hydraulic lines. This complete flaring set combines a forged flaring bar, a heavy-duty yoke with a chrome-plated...- $66.08
- $66.08
- Unit price
- per
-
Vendor:weyleity
weyleity Suction Cup Clamp Set 6-Pack — Heavy-Duty Suction Clamps for Glass & Trim, Locking Lever
weyleity 6 Pack Suction Cup Clamp Set is a six-piece kit of heavy-duty suction clamps designed to hold glass, trims, and convertible windows securely during sealing, gluing, and repairs. This compact clamp set is engineered for DIYers and professional technicians working on convertibles, windshields,...- $60.86
- $60.86
- Unit price
- per
-
Vendor:weyleity
weyleity Ball Joint Separator Set, 5-Piece Pickle Fork & Pitman Arm Kit — Heat-Treated, Chrome-Plated
weyleity's 5-piece ball joint separator set is a heavy-duty pickle fork and pitman arm splitter kit designed to remove tie rods, ball joints, and pitman arms quickly and reliably. If you work on cars or light trucks, having the right separator tooling makes removal...- $68.16
- $68.16
- Unit price
- per
-
Vendor:weyleity
weyleity Ball Joint Separator Set 5PCS — Forged Pickle Forks with 3 Sizes and Carrying Case
The weyleity Ball Joint Separator Set 5PCS is a heavy-duty pickle fork and pitman arm removal kit engineered to split tie rods, ball joints, and pitman arms quickly and reliably. Built for professional technicians and home mechanics alike, this five-piece splitter kit combines three...- $69.42
- $69.42
- Unit price
- per
-
Vendor:weyleity
weyleity 14" Coil Spring Compressor with 2 Steel Jaws — Forged-Steel, Heavy-Duty Two-Leg Design
Weyleity 14" Coil Spring Compressor is a heavy-duty, forged-steel tool kit designed to safely compress MacPherson strut coil springs for removal and installation. This two-piece spring compressor set is built for professional garages and DIY mechanics who need reliable, repeatable compression when servicing struts,...- $73.38
- $73.38
- Unit price
- per
-
Vendor:weyleity
weyleity 2-Pack Inner Tubes for 18x8.50-8 & 18x9.50-8 with TR13 Straight Valve — Butyl, Puncture-Resistant
These are two heavy-duty butyl inner tubes sized for 18x8.50-8 and 18x9.50-8 tires, each fitted with a TR13 straight valve stem for reliable inflation and long-lasting air retention. Built for utility vehicles and small equipment, the weyleity 2-pack offers durable replacement inner tubes that...- $68.16
- $68.16
- Unit price
- per
-
Vendor:weyleity
weyleity Coil Spring Compressor Tool Kit – forged chrome vanadium, up to 3/4" springs with detent latches and carrying case
The weyleity Coil Spring Compressor Tool Kit is a heavy-duty, chrome vanadium steel set designed to safely compress and remove automotive coil springs for both DIYers and professional mechanics. Whether you’re replacing struts, suspensions, or servicing springs, the weyleity kit delivers controlled compression, secure...- $79.64
- $79.64
- Unit price
- per
-
Vendor:weyleity
weyleity Windshield Removal Tool Kit 7pc — Heavy‑Duty Cutting Wire, Resharpenable Blades
The weyleity 7PCS Windshield Removal Tool Kit is a complete, heavy-duty set of hand tools designed to safely cut and lift bonded auto glass and trim for windshield, rear window, and quarter glass removal. If you replace or repair vehicle glass, the right hand...- $71.29
- $71.29
- Unit price
- per
-
Vendor:weyleity
weyleity Drum Brake Tool Kit 8-Piece with Spring Pliers — 45# Steel, Corrosion-Resistant Case
The weyleity 8PCS Drum Brake Tool Kit is a compact, professional-grade set of spring pliers and specialty tools for removing, installing, and adjusting drum brake components safely and efficiently. This 8-piece drum brake toolkit gathers the most-used hand tools for drum brake service into...- $76.51
- $76.51
- Unit price
- per
-
Vendor:weyleity
weyleity MacPherson Strut Spring Compressor Tool Kit — 11.5-inch travel, heavy-duty carbon steel, black oxide
Weyleity's MacPherson strut spring compressor tool kit is a heavy‑duty, heat‑treated carbon steel set designed to compress and release coil springs safely and efficiently for most small and medium cars. This professional-grade compressor kit combines reinforced rods, wide locking end pieces, and precision threads...- $81.73
- $81.73
- Unit price
- per
-
Vendor:weyleity
weyleity Professional 5 Ton Auto Body Repair Clamp Kit — Compact 45# Steel, 180° Swivel
Weyleity Professional 5 Ton Auto Body Repair Clamp Kit is a compact, heat-treated steel clamp designed for straight and right-angle pulls up to 5 tons, engineered for precision auto body work in tight spaces. This clamp kit brings a durable, shop-ready tool for technicians...- $87.99
- $87.99
- Unit price
- per
-
Vendor:weyleity
weyleity Manual Brake Bleeder Kit — 3L with 1L Bleed Bottle, Portable Single‑Person Pressure Bleeder
The weyleity 3L Manual Brake Bleeder Kit with 1L brake fluid bleed bottle is a portable, single-person pressure bleeder that lets you safely flush and replace brake or clutch fluid without an external compressor. This compact kit packs a 3-liter manual pressure tank, a...- $96.33
- $96.33
- Unit price
- per
-
Vendor:weyleity
weyleity Heavy Duty 5-Ton Bearing Puller Set 14PCS — Heat-Treated Steel, Case Included
The weyleity Heavy Duty 5-Ton 14PCS Bearing Puller Set is a robust, heat-treated bearing separator and puller kit built to remove gears and bearings cleanly from hubs and shafts. Engineered for professional garages and serious DIYers, this complete 14-piece set combines hardened steel components...- $110.94
- $110.94
- Unit price
- per
-
Vendor:weyleity
weyleity Heavy Duty Ball Joint Press and U-Joint Removal Tool Kit — Black-Oxide Forged Steel, Case Included
weyleity's Heavy Duty Ball Joint Press and U-Joint Removal Tool Kit is a professional-grade set designed to remove and install press-fit components such as ball joints and U-joints quickly and securely without disassembling control arms. This comprehensive kit delivers the torque, alignment, and parts...- $123.46
- $123.46
- Unit price
- per
-
Vendor:weyleity
weyleity Portable Wheel Balancer, Heavy-Duty Hubs, Bubble-Level Aluminum Frame (Compact)
weyleity Portable Wheel Balancer is a compact, bubble-type tire balancer with heavy-duty hubs that lets technicians and DIYers correct wheel imbalance quickly and accurately. Designed for garages, mobile mechanics and home workshops, this manual wheel balancer combines a robust aluminum-alloy frame with chrome-plated rods...- $162.06
- $162.06
- Unit price
- per
-
Vendor:weyleity
weyleity Rear Trailing Arm Bushing Tool Kit — Honda/Acura Fit, Corrosion-Resistant Metal with Hook & Compact Case
The weyleity Rear Trailing Arm Bushing Tool is a corrosion-resistant remover and installer kit that lets you extract and fit rear trailing arm bushings on select Honda and Acura models without removing brake components or using a hydraulic press. This compact, purpose-built toolset was...- $194.40
- $194.40
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.





















