BEP SPST Toggle Switch 12V 25A — PVC-Coated Water-Resistant, 8" 16AWG Leads

This single-pole, single-throw (SPST) toggle is designed to switch one electrical circuit on or off and is built with a PVC coating for added water resistance. It accepts 12V systems and is rated for up to 25 amps DC, making it suitable for many low-voltage automotive, marine and equipment applications. The switch comes with 8" 16 AWG wire leads for straightforward wiring and a 15/32" mounting stem that fits panels up to 3/16" thick. It is a direct replacement for Cole Hersee part number 5582-30.

How durable is this switch in damp or marine environments?

The housing is PVC-coated to resist moisture and light exposure, helping protect the internal contacts from corrosion. While not fully waterproof for submersion, the coating improves longevity in spray and splash conditions commonly encountered on boats and outdoor equipment.

• PVC coating for splash and spray protection
• Nominal 12V rating suitable for common DC systems
• 25A DC capacity for moderate current loads
• Replaces Cole Hersee 5582-30 for easy upgrades

What electrical and wiring details should I know before installing?

This SPST switch is rated for 25 amps at 12 volts DC and uses two terminals to open or close a single circuit. The switch ships with 8-inch, 16 AWG wire leads to simplify connections; ensure your wiring and fusing match the load to prevent overheating.

• Rated: 25A at 12V DC
• Wire leads: 8" length, 16 AWG
• Single-pole, single-throw on/off operation
• Use appropriate fuse sized to the device current draw

How does panel mounting and fitment work for this BEP toggle?

The switch has a 15/32" mounting stem and is suited for panels up to 3/16" thick, allowing flush installation in many dashboards and control panels. Verify the panel hole diameter and thickness before cutting to ensure a secure fit and proper sealing with the PVC coating in place.

• Mounting stem diameter: 15/32"
• Compatible panel thickness: up to 3/16"
• Compact profile for tight spaces
• Pre-wired leads avoid terminal adapters in many installs

Can this switch replace an existing Cole Hersee 5582-30?

Yes — the BEP SPST toggle is specified as a direct replacement for Cole Hersee part number 5582-30. Confirm physical dimensions and wiring orientation on the original switch to ensure plug-and-play compatibility.

• Advertised cross-reference: Cole Hersee 5582-30
• Similar mounting and lead configuration for direct swap
• Check panel cutout and lead routing during replacement

Who is this for: Technicians, boat owners, vehicle hobbyists, and equipment operators who need a simple, robust on/off switch for a single 12V circuit will find this BEP SPST toggle practical. It’s ideal when you require a water-resistant control with durable wire leads and an industry-compatible mounting profile for maintenance or upgrades.