EVIL ENERGY 13-Row Universal Engine Oil Cooler 10AN, Aluminum Stacked-Plate Compact 12.9"

This compact 13-row cooler from EVIL ENERGY uses a stacked-plate design and lightweight aluminum alloy to improve heat dissipation for engine oil, transmissions, and rear differentials. With a 10AN inlet/outlet size and a modest oil capacity of 0.29 L, it fits many installations where airflow is available. The unit ships with mounting instructions and is rated to a 116 PSI test pressure (232 PSI burst), making it suitable for typical automotive applications with occasional requirement for extra fittings or brackets depending on vehicle layout.

How does this cooler reduce oil temperature in everyday driving?

The stacked-plate construction increases surface area contact between oil and cooler walls, moving heat away from the fluid into passing air. Mounted where airflow is strong—like in front of a radiator or inside a bumper opening—it progressively lowers oil temperature without adding much volume to the system.

• 13-row stacked-plate design for efficient thermal transfer.
• Aluminum alloy body for lightweight, fast cooling.
• 10AN fittings compatible with common braided hoses and adapters.
• Compact footprint (12.91" × 3.78" × 1.97") fits tight locations with proper clearance.

Will it fit my vehicle and what do I need to check before buying?

The EVIL ENERGY cooler is marketed as a universal unit but requires that your chosen mounting zone accommodate its exact dimensions. Confirm that there is sufficient bracket space of at least 12.91" × 3.78" × 1.97" and that airflow is available where you plan to mount it.

• Measure the intended mounting area to ensure the cooler fits the listed dimensions.
• Verify that your vehicle can accept 10AN fittings or that you can source appropriate adapters.
• Some installations may need extra brackets, hoses, or fittings—these are not always included.
• Follow provided instructions for best placement and secure mounting into airflow.

How robust and safe is the cooler under pressure and heat?

Built from aluminum alloy, the cooler balances weight and strength for automotive use. It has a tested pressure rating of 116 PSI and a burst resistance of 232 PSI, which aligns with typical operating and incidental pressure scenarios for engine and transmission oil circuits.

• Material: corrosion-resistant aluminum alloy for long service life.
• Test pressure 116 PSI and burst pressure 232 PSI for durability reassurance.
• Low internal oil capacity (0.29 L) to minimize changes to system volume.

What should I know about installation and maintenance?

Installation is straightforward for mechanically-skilled users and includes instructions; however, accessibility and airflow are critical. Mount the cooler where it receives consistent air, secure fittings properly, and inspect connections periodically for leaks or wear.

• Includes installation instructions for guidance.
• Recommended mounting in areas with good forward or forced airflow.
• Periodic inspection of hoses and fittings prevents leaks and maintains cooling efficiency.
• May require additional fittings or brackets depending on vehicle model.

Who is this for: The EVIL ENERGY 13 Row 10AN Oil Cooler is aimed at car and light-truck owners, hobbyists, and performance tuners who need an efficient, space-conscious cooler to lower oil temperatures in engines, transmissions, or differentials. It suits anyone prepared to verify fitment, perform or supervise installation, and source any vehicle-specific fittings or brackets required for a secure, airflow-facing mount.