Lectron Level 2 EV Charger 40A 240V NEMA 14-50 — Portable J1772 Charger with 16 ft Cable, ETL Certified

The Lectron Level 2 EV Charger is a portable, ETL- and FCC‑certified 240V charging unit that delivers up to 40 amps (9.6 kW) through a NEMA 14-50 plug with a 16‑foot J1772 cable for fast home and on‑the‑go charging.

This compact charger gives drivers of J1772-equipped electric and plug‑in hybrid vehicles a practical alternative to slow Level 1 cords or costly hardwired stations. It combines safety certifications with weather resistance and a longer-than-average cable so you can plug into a standard 240V NEMA 14-50 outlet and get near Level 2 speeds without professional installation. The unit is portable, straightforward to use, and broadly compatible with most non‑Tesla EVs (Tesla owners can use a separate adapter).

How fast will the Lectron charger charge my EV?

Running on 240 volts and up to 40 amps, this charger supports charging rates up to roughly 9.6 kW, which significantly reduces charging time compared with standard 120V cords. Actual charge speed depends on your vehicle’s onboard charger limits and the outlet supply.

• Up to 40A input for near‑Level 2 charging performance
• 9.6 kW maximum theoretical rate (vehicle dependent)
• Better for daily top‑ups and faster home charging sessions

Is the Lectron charger safe to use at home and outdoors?

Safety features and third‑party certifications are central to this design: ETL and FCC approvals, plus protective circuitry, help guard against overvoltage, overcurrent and short circuits. With an IP65 rating the housing is dust‑tight and resists water spray, so it stands up to typical driveway and garage conditions.

• ETL certified to recognized electrical safety standards
• Built‑in protections for overcurrent and short circuits
• IP65 dust and water spray resistance for outdoor use

Do I need an electrician to install this charger?

No hardwiring is required: the Lectron charger uses a NEMA 14-50 plug that connects directly to a compatible 240V outlet. That makes it simple to start faster charging right away, though you should confirm your outlet is properly installed and rated for 40 amps.

• Plugs into standard NEMA 14-50 240V receptacles — no hardwire needed
• Portable design lets you move it between locations or take it on trips
• Confirm outlet amperage and circuit breaker compatibility before use

Which vehicles will this Lectron charger work with?

The charger uses the universal J1772 connector, making it compatible with most electric vehicles and plug‑in hybrids from mainstream automakers. Tesla vehicles require a J1772‑to‑Tesla adapter to connect because they use a proprietary inlet.

• Direct J1772 compatibility with many makes: BMW, Ford, Honda, Hyundai, Kia, Nissan, Chevy, Porsche, Mercedes
• Tesla owners can use a separate adapter (not included)
• Suitable for daily charging routines and longer top‑ups

Who is this for: The Lectron Level 2 EV Charger suits EV owners who want faster charging than a 120V cord without the expense or permanence of a hardwired wall unit. It’s ideal for renters with a compatible NEMA 14-50 outlet, households sharing one charger between cars, drivers who travel and need a portable solution, and anyone wanting straightforward, certified Level 2 charging at home or at compatible public 240V outlets.

Note: always verify your vehicle’s maximum onboard charging rate and your outlet’s circuit rating before using a high‑amp charger. Use a Tesla adapter for Tesla vehicles; adapter not included.