U-POL Dolphin Glaze polyester finishing glaze 440ml — self-leveling, fast solvent resistance for spot repairs

U-POL DOLPHIN GLAZE 0714 is a 440ml self-leveling polyester finishing filler that spreads smoothly, tacks free, adheres strongly to metal and sands easily for fast refinishing.

This polyester finishing glaze by U-POL is formulated for a very fine, uniform surface that simplifies final levelling and preparation before topcoat. It bonds directly to bare metal, cures quickly to solvent resistance, and leaves a surface that requires minimal sanding effort. The product is supplied in a convenient 440ml size suitable for spot repairs and small to medium refinishing jobs.

How fast does Dolphin Glaze become resistant to solvents?

Dolphin Glaze reaches surface resistance to solvents within 15–20 minutes under normal workshop conditions, enabling quicker workflow between stages. Full cure and optimal sanding characteristics develop shortly after initial solvent resistance.

• Solvent resistance: typically 15–20 minutes
• Ready for sanding soon after passing solvent-resistance
• Works in standard automotive repair conditions

What surface preparations and substrates are recommended?

The product is designed to be applied direct to metal where good adhesion is required; ensure the substrate is clean, dry and free of rust, oil or loose coatings. Light mechanical abrasion or degreasing improves bond and promotes consistent results.

• Direct-to-metal application supported
• Remove rust, grease and contaminants before application
• Light sanding or abrasion recommended for best adhesion

How easy is Dolphin Glaze to apply and sand?

Formulated for easy spreading, this polyester glaze levels itself to minimize tool marks, creating an extra-smooth finish that reduces sanding time. Once cured, it sands readily to a uniform surface ready for primer or topcoat.

• Self-leveling consistency for smooth application
• Tack-free finish reduces dust pickup
• Sands down easily for quick refinishing steps

What are the practical features that speed up repairs?

Dolphin Glaze combines strong adhesion, quick development of solvent resistance, and a smooth, easy-to-sand surface to accelerate repair cycles. The 440ml format is practical for spot work while keeping product handling efficient.

• Unparalleled adhesion properties for reliable bonding
• Extra smooth, tack-free finish to speed preparation
• Compact 440ml size suited for spot and small repairs

Who is this for: U-POL DOLPHIN GLAZE 0714 is intended for professional refinishers, bodyshop technicians and skilled DIYers who need a high-quality polyester finishing glaze that adheres well to metal, levels itself for minimal sanding, and allows faster progression through solvent resistance and preparation stages. It’s best used where smooth final surfaces and dependable adhesion are priorities before primer or topcoat application.