-
Vendor:A ABIGAIL
A ABIGAIL Air Intake Hose for Toyota 4Runner 3.4L V6 (1996-1998) - Direct-Fit Heat-Resistant Rubber Intake Duct
Replacement air intake hose specifically built for Toyota 4Runner 3.4L V6 (1996–1998) to restore proper air flow and seal from the grille to the throttle body. If your 4Runner shows signs of air leaks, rough idling, or decreased throttle response, the intake duct tube...- $81.73
- $81.73
- Unit price
- per
-
Vendor:X AUTOHAUX
X AUTOHAUX Heater Supply Hose for Chrysler 300 / Dodge Challenger & Charger 2011–2021 — Direct-Fit Replacement, OE 55038163AE
X AUTOHAUX HVAC Heater Hose is a direct-fit replacement hose that circulates engine coolant to and from the heater core for select Chrysler 300, Dodge Challenger and Dodge Charger models (2011–2021). When the original heater hose cracks, leaks, or becomes brittle, cabin heating and...- $75.45
- $75.45
- Unit price
- per
-
Vendor:PSLER
PSLER Shovel & Axe Mount Clamps for 1-1.75" Roll Bars - Quick-Release Rubber-Insert
PSLER's quick-release rubber clamp set secures shovels, axes and similar tools to 1–1.75" round roll bars, roof racks and bull bars for safe, rattle-free transport. This pair of mounting clamps combines soft rubber inserts with anodized aluminum brackets to hold hand tools like shovels...- $79.64
- $79.64
- Unit price
- per
-
Vendor:RARAYC
RARAYC Aluminum Engine Coolant Housing Water Outlet Kit for 2011–2020 Chevy Cruze/Sonic/Trax/Encore 1.4L — Includes Hoses & Gasket
This RARAYC kit replaces the plastic engine coolant outlet with a durable 1060-H32 aluminum housing plus two replacement radiator hoses and all gaskets for a direct-fit repair on 1.4L Chevy and Buick models. If your vehicle is leaking coolant or the stock plastic outlet...- $77.55
- $77.55
- Unit price
- per
-
Vendor:Sierra
Sierra Bilgeflex Bilge Hose 1-1/8" x 9' Black — Corrugated Polyethylene, Built-in Clamping Cuffs
Sierra Bilgeflex 1-1/8" x 9' is a single-layer corrugated polyethylene bilge hose designed for safe, flexible bilge pump discharge in marine environments. This Bilgeflex hose from Sierra is made of corrugated polyethylene in a single layer, engineered for flexibility, corrosion resistance and easy routing...- $87.40
- $87.40
- Unit price
- per
-
Vendor:Dorman
Dorman Front Passenger-Side Brake Hydraulic Hose for Jeep Wrangler 2011-2017 — OEM Fit, EPDM Rubber
Dorman H621749 is a front passenger-side brake hydraulic hose engineered to replace the original hose on compatible Jeep Wrangler models from 2011 through 2017. This brake hydraulic hose is built to provide a direct, position-specific replacement that restores proper brake fluid routing and connection...- $80.31
- $80.31
- Unit price
- per
-
Vendor:MOTOKU
MOTOKU HVAC Heater Hose Assembly for Chevrolet Silverado 1500 / GMC Sierra 1500 (2014–2019) — Inlet & Outlet Direct-Fit
MOTOKU HVAC Heater Hose Assembly replaces the inlet and outlet heater hoses for Chevrolet Silverado 1500 and GMC Sierra 1500 models from 2014–2019, restoring proper coolant flow to the cabin heater. If your Silverado or Sierra is showing coolant leaks near the firewall, has...- $87.99
- $87.99
- Unit price
- per
-
Vendor:HQPARRTS
HQPARRTS Turbo Coolant Line Repair Kit for BMW N63 — Brass T Fittings & Silicone Hoses, 13-Clamp Kit
HQPARRTS Turbo Coolant Line Repair Hose Kit replaces fragile plastic T/Y fittings with durable brass fittings and silicone hoses to stop turbo coolant leaks on BMW N63 engines. This repair kit is designed to replace known failure points in BMW N63 turbo coolant and...- $77.55
- $77.55
- Unit price
- per
-
Vendor:Continental
Continental 1/4 in Fuel Hose 25 ft Black — 50 psi Rated, Nitrile Tube for Gasoline & Ethanol
Continental 65126 is a 25-foot, 1/4" ID multipurpose fuel hose engineered for fuel line, PCV, emission and return-line use with a 50 psi working pressure. This Continental Elite hose is built to handle common automotive fuel system tasks where moderate pressure and chemical resistance...- $83.00
- $83.00
- Unit price
- per
-
Vendor:iKer
iKer HVAC Heater Hose Assembly for Chrysler Town & Country & Dodge Grand Caravan 3.6L (5058729AH) — Rubber, Reinforced Y-Connector
iKer HVAC Heater Hose assembly (5058729AH / 626-315HP) is a direct-replacement rubber heater hose built to restore your Chrysler Town & Country or Dodge Grand Caravan heating and coolant routing quickly and with OE-fit reliability. This replacement heater hose is designed for vehicles equipped...- $81.73
- $81.73
- Unit price
- per
-
Vendor:COOL STAR
COOL STAR Jeep Cherokee Heater Hose Kit 2014-2018 (3 Black Rubber Hoses) direct-fit, OEM cross-reference
A direct-fit replacement heater hose kit for Jeep Cherokee 2014–2018 (also fits select Chrysler 200 2015–2017 models), supplied as three durable black rubber hoses to restore your vehicle's heater plumbing. If your Cherokee's heater hoses are cracked, leaking, or brittle from age, the COOL...- $83.81
- $83.81
- Unit price
- per
-
Vendor:ASKALL
ASKALL Radiator Coolant Hose Kit for GM V8 Trucks and SUVs — Upper & Lower Replacement for 2007–2014 (Replaces 22827731/22827735)
ASKALL engine upper and lower radiator coolant hoses are direct-fit replacement hoses engineered to restore coolant flow for compatible Cadillac, Chevrolet and GMC V8 engines. These replacement hoses are molded from durable rubber compounds and inspected to match OE dimensions so you can swap...- $83.81
- $83.81
- Unit price
- per
-
Vendor:MOTOKU
MOTOKU HVAC Heater Hose Kit for 2.4L Chrysler 200 2015-2017 — Direct-Fit OEM Replacement, Full 3-Piece Assembly
MOTOKU HVAC Heater Hose Kit is a direct-fit replacement hose assembly engineered to restore proper coolant flow to the heater circuit on 2.4L Chrysler 200 and compatible Jeep Cherokee vehicles. This MOTOKU kit gathers the main supply hose, supply jumper, and return jumper connector...- $74.82
- $74.82
- Unit price
- per
-
Vendor:Gates
Gates Windshield Washer & Vacuum Hose 5/32" ID x 50 ft — Flexible Non‑Reinforced Automotive Tubing
Gates 27042 is a 50-foot, non-reinforced windshield washer and vacuum hose with a 5/32" inner diameter engineered for flexible, long-lasting service around the engine bay. This hose replaces standard PVC lines for windshield and headlight washers, links vacuum-operated accessories, and routes overflow or rainwater...- $75.47
- $75.47
- Unit price
- per
-
Vendor:COOL STAR
COOL STAR Heater Outlet & Inlet Hose Set for 3.6L GM V6 — Direct-Replace Rubber with Metal Fittings
COOL STAR Engine Heater Outlet and Inlet Hose set replaces worn coolant hoses on 3.6L Buick, Chevrolet, GMC and Saturn models for a factory-style fit. If your vehicle is showing coolant leaks, poor heater performance, or soft/expanded hoses, these replacement heater outlet and inlet...- $72.73
- $72.73
- Unit price
- per
-
Vendor:Tigbear
Tigbear R410A Recharge Kit HVAC Manifold Gauge Set — 59" Hoses, Brass Fittings, R410/R134A Adapters
The Tigbear R410A Recharge Kit is a complete low‑pressure manifold hose set with two 59" charging hoses, a 0–550 PSI gauge with shutoff, and R410A/R134A adapters for safe, accurate HVAC topping‑up and vacuuming. If you need a compact, serviceable hose kit for mini‑split repairs,...- $79.64
- $79.64
- Unit price
- per
-
Vendor:Dorman
Dorman Front Driver-Side Brake Hydraulic Hose H621750 for 2011–2017 Jeep Wrangler — EPDM, Corrosion-Resistant Fittings
Dorman H621750 is a direct-fit front driver-side brake hydraulic hose engineered to replace the original hose on compatible 2011–2017 Jeep Wrangler models. This replacement brake hose is built to match the fit, routing and performance of the factory part so you can restore braking...- $79.51
- $79.51
- Unit price
- per
-
Vendor:RALZAOTO
RALZAOTO Air Intake Hose for Ford F-150 F-250 F-350 Bronco 94–97 — OEM F6TZ-9B659-AD Replacement, Reinforced Rubber
High-strength RALZAOTO air intake hose replaces F6TZ-9B659-AD to restore proper air flow for Ford F-150 (1994–1996), F-250 (1994–1997), F-350 (1994–1997) and Bronco (1994–1996). This replacement air intake tube is designed to match the original air cleaner duct hose fit and function while offering durable...- $81.68
- $81.68
- Unit price
- per
-
Vendor:X4XZ
X4XZ Air Cleaner Intake Inlet Duct Hose for Mercedes-Benz CLA/GLA 2015–2020 — OE Fit, Heat-Resistant
X4XZ Air Cleaner Intake Inlet Duct Hose (OE 2700900382) is a direct-fit replacement intake duct designed to restore proper airflow for select 2015–2020 Mercedes-Benz CLA and GLA models. This replacement intake inlet duct is engineered to match OEM dimensions and mounting points so it...- $96.33
- $96.33
- Unit price
- per
-
Vendor:Camotokiit
Camotokiit Engine Air Intake Hose for Chevy HHR 2006–2011 — Black Direct-Fit OEM Replacement 15865168
Camotokiit Engine Air Intake Hose 696-012 is a direct-fit replacement for GM part 15865168 designed to restore proper air flow to 2006–2011 Chevrolet HHR engines. This replacement air intake hose is built to match the original equipment form, fit, and function so you can...- $80.89
- $80.89
- Unit price
- per
-
Vendor:Continental
Continental 5/16" ID Fuel Hose 25 ft - SAE J30R7, 50 psi, nitrile tube & CPE cover
Continental 65127 is a 25-foot, 5/16" inner-diameter multipurpose fuel hose engineered for fuel lines, PCV, emission control and return lines with a 50 psi working rating. This SAE J30R7-rated hose combines a nitrile inner tube, two-spiral synthetic reinforcement and a chlorinated polyethylene cover to...- $84.71
- $84.71
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 5/16" Fuel Injection Hose SAE 30R9 5ft — FKM-Lined, 300 PSI E85 Compatible
EVIL ENERGY's 5/16" SAE 30R9 fuel injection hose is a 5-foot, 300 PSI-rated, FKM-lined fuel line engineered for fuel injection systems and E85-compatible applications. This hose is built for demanding automotive fuel systems where chemical resistance, high operating pressure, and temperature durability matter. Constructed...- $81.73
- $81.73
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 10AN Straight Hose End Fittings, 4pc — 6061‑T6 Aluminum, 1,500 PSI Rated
EVIL ENERGY 4PCS 10AN straight hose end fittings are 6061‑T6 aluminum, 10AN (7/8‑14 UNF) straight swivel fittings engineered for stainless steel and nylon braided fuel hoses. These four straight hose end fittings provide a reusable, high‑strength connection solution for custom fuel, oil, or fluid...- $74.42
- $74.42
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 8AN 90° Hose End Fittings 4‑Pack — 6061‑T6 Aluminum, 3/4‑16 UNF Threaded, 360° Swivel
EVIL ENERGY 4PCS 8AN 90° hose end fittings are 6061-T6 aluminum, 3/4-16 UNF threaded, 90-degree swivel fittings made for stainless and nylon braided fuel hoses. These four AN-style hose ends are built to connect 8AN braided fuel lines where a tight 90-degree turn and...- $76.51
- $76.51
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 10AN 90° Hose End Fittings, 4-Pack — 6061-T6 Aluminum, 360° Swivel, 1500 PSI
EVIL ENERGY 4PCS 10AN 90 Degree Hose End Fittings are 6061-T6 aluminum swivel connectors designed for stainless-steel and nylon braided fuel hoses, offering a 360° swivel, a 37° AN seal and a durable 1500 PSI working rating. These 10AN 90-degree hose ends from EVIL...- $78.60
- $78.60
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 6AN 90° Swivel Hose End Fittings, 4‑Pack — 6061‑T6 Aluminum, AN 37° Seal
EVIL ENERGY 4PCS 6AN 90 Degree Hose End Fittings are aluminum swivel connectors designed to join 6AN braided fuel hoses at a right angle for compact, leak-resistant installations. These four 6AN 90° hose ends provide a space-saving, reusable connection for stainless steel and nylon...- $76.72
- $76.72
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY Silicone Vacuum Hose Kit 4-Piece 5FT Tubes — Black, 5/32"–1/2" for Turbo & Vacuum Lines
EVIL ENERGY’s 4-piece silicone vacuum hose kit includes four 5-foot tubes in 5/32", 1/4", 5/16" and 1/2" diameters, made from food-grade silicone and rated for high temperature and vacuum use. This kit bundles the common vacuum and boost hose sizes most mechanics, tuners, and...- $73.38
- $73.38
- Unit price
- per
-
Vendor:Shineyoo
Shineyoo Silicone Vacuum Hose Kit — 5-Pack 10 ft Each (1/8"–3/8" ID), High-Temp 130 PSI
Shineyoo Vacuum Hose Automotive Kit delivers five 10‑ft silicone vacuum lines (1/8", 5/32", 1/4", 5/16", 3/8" IDs) built for high‑temperature, high‑pressure automotive use. This kit gathers the most commonly needed vacuum tubing diameters into one set so you can replace or fabricate vacuum, boost,...- $92.16
- $92.16
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 2.75" T-Bolt Hose Clamps 4-Pack — 304 Stainless, 0.75" Band for 2.8–3.07" Hoses
EVIL ENERGY 2.75-inch T-bolt hose clamps are heavy-duty stainless-steel clamps designed to secure hoses with outside diameters from 2.8 to 3.07 inches (71–78 mm) for durable, leak-resistant connections. These 4-pack T-bolt clamps combine a wide 0.75-inch band, M6×82 mm bolt, and polished 304 stainless...- $74.03
- $74.03
- Unit price
- per
-
Vendor:Shineyoo
Shineyoo Silicone Vacuum Hose Kit 128-Piece — 6 Sizes, 6.6 ft Each, 3mm Wall High-Temp 130PSI
Shineyoo Silicone Vacuum Tubing Kit is a 128-piece set of high-temperature, 3mm-wall silicone vacuum hoses and connectors that replace brittle OEM vacuum lines and handle up to 130 PSI at room temperature. Whether you're repairing vacuum lines on a car, building custom intake plumbing...- $87.99
- $87.99
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 2.5" T-Bolt Hose Clamps 304 Stainless Steel, 4-Pack — 63–71mm Heavy-Duty, Corrosion-Resistant
EVIL ENERGY 2.5 inch T-bolt hose clamps are heavy-duty 304 stainless steel clamps designed to secure 63–71 mm hoses with a durable, leak-resistant seal. These four T-bolt clamps combine robust materials and a flap design to give reliable, corrosion-resistant clamping for automotive, industrial, marine,...- $73.38
- $73.38
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3" T-Bolt Hose Clamps 4-Pack — 304 Stainless Steel, 77–85mm (19mm Band)
EVIL ENERGY 3-inch T-bolt hose clamps are heavy-duty, 304 stainless steel clamps engineered to secure hoses from 77 mm to 85 mm (3.03–3.35 in) with a broad 19 mm band for reliable sealing. These T-bolt clamps combine corrosion-resistant 304 stainless steel with a reinforced...- $75.47
- $75.47
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 1/4" Push-Lock Fuel Hose 20 ft SAE 30R7 NBR — 300 PSI Reinforced
EVIL ENERGY 1/4" push-lock fuel hose is a 20-foot, SAE 30R7-compliant NBR line rated for 300 PSI working pressure and built for oil, gasoline, diesel and biodiesel fluid delivery. This reinforced fuel hose combines a nitrile-butadiene rubber (NBR) inner tube with a braided polyester...- $83.81
- $83.81
- Unit price
- per
-
Vendor:Tnisesm
Tnisesm Silicone Vacuum Hose Kit 134-Piece — 6.6 ft Tubing (6 Sizes) & 12 Connectors, High-Temp/High-Pressure
The Tnisesm 134-piece silicone vacuum hose kit is a complete automotive vacuum line set featuring six silicone tube sizes, twelve connector styles, and high-temperature, high-pressure performance for engine bay and DIY fabrication work. This kit bundles long runs of reinforced silicone vacuum hose with...- $81.71
- $81.71
- Unit price
- per
-
Vendor:ROADFORMER
ROADFORMER 6-inch T-Bolt Hose Clamp 158–166mm (6.22–6.54") 2-Pack — 304 Stainless, Wide 3/4" Band
ROADFORMER 6-inch T-bolt hose clamp (158–166 mm) is a heavy-duty 304 stainless steel clamp sold in a 2-pack for secure, even sealing on 6" nominal I.D. hoses. These ROADFORMER clamps are built to fasten hoses used in turbo systems, intercoolers, radiators, coolant lines and...- $75.47
- $75.47
- Unit price
- per
-
Vendor:Jeemiter
Jeemiter 5/16in Fuel Line 25ft Kit — SAE 30R7 NBR Hose with 10 Clamps, 300 PSI Working
Jeemiter's 5/16" ID fuel line is a 25-foot SAE 30R7–rated NBR rubber hose kit that includes ten clamps and is built for gasoline, diesel, oil and multi-fuel applications. This professional replacement hose delivers durable fuel-handling performance for small engines, automotive and marine systems. Constructed...- $92.16
- $92.16
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 6AN PTFE Straight Hose End Fittings 4-Pack — Black 6061-T6 Aluminum, 1500 PSI
EVIL ENERGY 6AN straight PTFE hose end fitting is a black, aluminum alloy connector designed exclusively for PTFE fuel lines, sold as a 4-piece set with a 6AN (9/16-18UNF) threaded AN sealing angle. These straight hose ends are built for high-pressure PTFE hose applications...- $75.47
- $75.47
- Unit price
- per
-
Vendor:OURU
OURU 52‑Piece Fuel Line Clamp Assortment Kit — 10 Sizes (7–18mm), 304 Stainless Steel, Labeled Storage Box
OURU 52PCS Fuel Line Clamp Assortment Kit is a compact, stainless-steel collection of 10-size hose clamps designed to create secure, leak-resistant connections for fuel, water, air and silicone hoses. This kit gathers 52 precision-crafted mini hose clamps in a durable storage box so you...- $83.81
- $83.81
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY Silicone Heater Hose 5/8" 10FT — Reinforced SAE 20R3, 60 psi, -67°F to 356°F
EVIL ENERGY 5/8" Silicone Heater Hose is a 10-foot, SAE 20R3-compliant coolant and heater line built from reinforced silicone for wide temperature resilience and reliable 60 psi working pressure. This silicone heater hose is designed for automotive and heating-system use where durable, heat-tolerant coolant...- $86.32
- $86.32
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 2.5" V-Band Clamp 304 Stainless — Gasketless Turbo/Exhaust Seal with T-Bolt
EVIL ENERGY's 2.5-inch V-band clamp with integrated male/female flanges is a durable 304 stainless steel coupling that creates a tight, gasketless seal for turbo, downpipe and exhaust connections. This V-band assembly is built for repeatable, high-temperature exhaust and turbo connections where alignment, corrosion resistance...- $77.55
- $77.55
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 2.25" V-Band Clamp with Male/Female Flanges — 304 Stainless, M8 T-Bolt for Exhaust & Turbo
EVIL ENERGY's 2.25-inch V-band clamp with male/female flanges is a heavy-duty stainless-steel coupling that quickly and securely joins 2.25" exhaust components with an even, gasketless seal. Designed for performance exhaust work and turbo plumbing, this V-band assembly pairs 304 stainless flanges with a durable...- $75.47
- $75.47
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/4" Heater Hose 10ft EPDM Coolant Hose SAE 20R3 100 PSI - High Temp Resistant
EVIL ENERGY 3/4" Heater Hose is a 10-foot EPDM coolant hose built to SAE 20R3 standards for reliable coolant, water, and antifreeze routing at up to 100 psi. This premium heater hose combines durable EPDM rubber with precise dimensional control to serve heater cores,...- $92.16
- $92.16
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 5/8" Heater Hose 10 ft EPDM Coolant Hose SAE 20R3 — 100 PSI, -40°F to 257°F
EVIL ENERGY 5/8" Heater Hose is a 10-foot EPDM coolant hose engineered to meet SAE 20R3 standards for vehicle heating and radiator circulation. This heavy-duty heater hose is built from weather- and heat-resistant EPDM rubber to carry coolant, water, and antifreeze reliably in automotive...- $87.99
- $87.99
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 10AN PTFE hose end fittings Straight Black 4pc — 360° swivel, 1500 PSI
EVIL ENERGY 10AN straight PTFE hose end fittings are black anodized, 6061‑T6 aluminum connectors designed specifically to join PTFE fuel lines with a 7/8‑14UNF (10AN) thread and provide a sealed, swivelable connection rated to 1500 PSI. These straight fittings come as a set of...- $77.55
- $77.55
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 6AN 90° PTFE Hose End Fittings — Black 4-Pack, 6061-T6 Aluminum 360° Swivel
EVIL ENERGY 6AN 90° PTFE hose end fittings are 90-degree aluminum swivel connectors designed specifically to join PTFE fuel hoses, sold as a pack of four in black. These fittings pair with PTFE-lined fuel hose to create a high-pressure, heat-tolerant connection for automotive and...- $81.73
- $81.73
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 8AN PTFE Straight Hose End Fittings — Black Anodized, 4-Pack, 1500 PSI 360° Swivel
EVIL ENERGY 8AN straight PTFE hose end fittings are black anodized aluminum connectors designed to join 8AN (3/4-16UNF) PTFE fuel hoses with a 37° AN seal, sold as a set of four. These straight hose ends are engineered specifically for PTFE-lined fuel hose systems...- $73.38
- $73.38
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 8AN PTFE 90° Hose End Fittings — 4-Pack Black, 6061-T6 Aluminum, 360° Swivel
EVIL ENERGY 8AN 90° PTFE hose end fittings are 4 black, 90-degree aluminum swivel fittings designed specifically for PTFE fuel lines. These 8AN angled hose ends are built to mate with PTFE-lined fuel hose, offering a compact elbow connection where space is limited. Machined...- $83.81
- $83.81
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 6AN PTFE 45° Hose End Fitting — Black 4‑Pack, 1500 PSI, 360° Swivel
EVIL ENERGY 6AN 45° PTFE hose end fitting is a black, 4-piece aluminum swivel fitting designed specifically for PTFE fuel lines and rated to 1500 PSI. This four-pack of 6AN 45-degree hose end fittings is built for PTFE hose systems where a reliable, sealed...- $75.47
- $75.47
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN10 Hose Separator Clamp Pack — 10PCS 6061-T6 Aluminum Mounts for 0.75" (19mm) Hoses
EVIL ENERGY 10AN Hose Separator Clamp 10PCS is a 6061-T6 aluminum mounting clamp sized for AN10 (0.75"/19mm) hoses to neatly secure and separate fuel, oil, brake, and other lines. Keep routing tidy and prevent hoses from rubbing against each other or vehicle bodywork with...- $77.55
- $77.55
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN8 Hose Separator Clamps 10-Pack — 6061-T6 Aluminum, 0.63in (16mm) ID for Fuel & Oil Lines
EVIL ENERGY 8AN hose separator clamp is a 10-piece set of 6061-T6 aluminum mounts designed to secure and separate AN8 (8AN) fuel lines and similar hoses for a neater, safer installation. If you’re routing fuel hoses, oil lines, brake lines or other fluid lines...- $72.75
- $72.75
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.















































