-
Vendor:HBD Industries
HBD Industries Thermoid SAE30R7 Fuel Line Hose 1/4" x 25' — NBR/PVC, E85‑Safe, -40°F to +257°F
HBD Industries 25060 Thermoid is a 25-foot roll of SAE30R7-rated 1/4" (0.25" ID) NBR/PVC fuel line engineered to carry gasoline (including E85) and diesel safely over a wide temperature range. This heavy-duty fuel hose blends a nitrile (NBR) inner tube with a PVC/nitrile outer...- $106.79
- $106.79
- Unit price
- per
-
Vendor:Dorman
Dorman PCV Emissions Hose replacement for Ford & Lincoln 2000–2003 — heat- and oil-resistant durable tubing
The Dorman 46087 is a direct-replacement PCV emissions hose engineered to restore proper crankcase ventilation and stop leaks on compatible Ford and Lincoln models from 2000–2003. Worn or cracked PCV hoses can allow oil vapors and blow-by gases to escape, create idle irregularities, or...- $96.33
- $96.33
- Unit price
- per
-
Vendor:Boltigen
Boltigen 1" Fuel Transfer Hose 6 ft 1" NPT — Reinforced Stainless Braid, -40°F to 212°F
Boltigen's 1" Fuel Transfer Hose (6 ft, 1" NPT) is a reinforced, multi-layer hose engineered for safe, flexible transfer of gasoline, diesel, kerosene and compatible fuels. This 6-foot, 1" NPT fuel hose combines a nitrile rubber core, stainless-steel braid reinforcement, and a blended PVC-nitrile...- $108.85
- $108.85
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/4" Heater Hose 10ft EPDM Coolant Line with 10 Clamps — 100psi Working, 300psi Burst
EVIL ENERGY 3/4" Heater Hose is a 10-foot EPDM coolant line rated for 100psi (300psi burst) that connects radiators, overflow reservoirs, and heater cores with included clamps. This premium-grade hose is built from durable EPDM rubber and dimensioned for automotive cooling systems where reliable...- $94.25
- $94.25
- Unit price
- per
-
Vendor:Allstar Performance
Allstar Performance lower radiator hose 1-3/4" x 16-1/2" — two-ply abrasion-resistant, heat-tolerant
Allstar Performance ALL30224 is a two-ply, abrasion-resistant lower radiator hose sized 1-3/4" x 16-1/2" built to flexibly route coolant while resisting cracking and hardening. This replacement lower radiator hose is designed for reliable coolant transfer in a range of vehicle applications. Constructed with two...- $91.41
- $91.41
- Unit price
- per
-
Vendor:Meonum
Meonum 30FT 3/8" Fuel Line Hose — 300 PSI NBR High-Pressure with 20 Clamps
Meonum 30FT 3/8" ID fuel line hose is a high-pressure NBR rubber hose rated to 300 PSI that provides a long, durable, cut-to-size solution for fuel, oil, and vacuum lines. This 30-foot length of 3/8" inner diameter fuel hose is built for installers, mechanics,...- $102.59
- $102.59
- Unit price
- per
-
Vendor:Ailbiuko
Ailbiuko 15FT Coiled Semi Truck Air Brake Line Hose — PA12 Nylon with Brass Fittings
Ailbiuko 15FT Semi Truck Air Brake Line Hose is a heavy-duty, DOT-compliant coiled air line made from PA12 nylon with solid brass fittings and anti-kink protection for reliable trailer and tractor air brake connections. This 15-foot coiled air brake hose is engineered for commercial...- $117.20
- $117.20
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/8" ID Fuel Line Hose 20FT — SAE 30R7 NBR Rubber Push-Lock, 300 PSI Oil-Resistant
EVIL ENERGY 3/8" ID Fuel Line Hose is a 20-foot SAE 30R7 NBR rubber push-lock hose designed to deliver fuel, oil, and related fluids reliably for small engines and outdoor equipment. This heavy-duty fuel line is engineered to meet SAE 30R7 standards, combining nitrile...- $108.85
- $108.85
- Unit price
- per
-
Vendor:Shineyoo
Shineyoo Silicone Vacuum Tubing Kit - 6×10ft (1/8"–3/8") High Temp, 3mm Wall
Shineyoo 6-piece silicone vacuum tubing kit supplies six 10-foot rolls of high-performance vacuum hose in the most common inner diameters for automotive, marine, and industrial use. This kit gathers the 6 frequently used inner diameters into one package—1/8", 5/32", 3/16", 1/4", 5/16" and 3/8"—with...- $100.50
- $100.50
- Unit price
- per
-
Vendor:Shineyoo
Shineyoo Fuel Line Hose Kit 6 Sizes (5 ft) with 30 Clamps — NBR Rubber, Braided Reinforced, High-Pressure
Shineyoo's 6-size fuel line kit supplies six common inner-diameter rubber NBR hoses (each 5 ft) plus 30 matching clamps for repairs and upgrades on small engines. This kit is built for mechanics, tinkerers and homeowners who service lawn mowers, ATVs, cultivators, tractors and other...- $94.25
- $94.25
- Unit price
- per
-
Vendor:Jeemiter
Jeemiter Fuel Hose 3/8" ID 25ft Kit — SAE 30R7 NBR, 300 PSI Working Pressure
Jeemiter's 3/8" ID Fuel Hose 25FT kit is a SAE 30R7-rated NBR fuel line designed to handle gasoline, diesel, biodiesel and engine oil systems at high working pressures. This 25-foot, 3/8-inch inner diameter hose is built for demanding vehicle and fluid-transfer tasks where oil...- $98.42
- $98.42
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN6 Braided Fuel Line Kit 10ft Black CPE Nylon – 750 psi Working, High-Temp Resistant
EVIL ENERGY 6AN Fuel Line Kit is a 10-foot, black CPE inner hose with 304 stainless and nylon braided reinforcement designed for high-pressure fuel and fluid routing in automotive and racing applications. This 6AN fuel hose kit combines a chemically resistant CPE inner tube...- $104.68
- $104.68
- Unit price
- per
-
Vendor:Outus
Outus Silicone Heater Hose 3/4" ID 10ft Blue – Reinforced, Heat-Resistant Coolant Line
The Outus 3/4" ID, 10ft blue silicone heater hose is a flexible, reinforced coolant line built to withstand high temperatures and pressures for radiator, heater, and engine cooling applications. This 10-foot coil of blue silicone hose is engineered as a durable replacement or upgrade...- $94.25
- $94.25
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/8" Marine Fuel Line Hose 10FT Type A1-15 SAE J1527 — marine-grade, low-permeation durability
EVIL ENERGY 3/8" Marine Fuel Line Hose Type A1-15 is a 10-foot, marine-grade rubber fuel hose built to SAE J1527/A1-15 standards for safe, low-permeation fuel delivery on pleasure boats. This fuel hose combines a nitrile rubber (NBR) inner tube, an NBR+PVC outer cover, and...- $92.16
- $92.16
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/4" Silicone Heater Hose 10FT – SAE 20R3, 60 psi working, -67°F to 356°F
EVIL ENERGY 3/4" Silicone Heater Hose is a durable 10-foot coolant and heater line built to SAE 20R3 Class A standards, handling -67°F to 356°F and rated to 60 psi working pressure. This silicone heater hose combines braided polyester reinforcement with inner and outer...- $96.33
- $96.33
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 1" Silicone Heater Hose 10 ft – SAE 20R3 Class A, 60 PSI, -67°F to 356°F
EVIL ENERGY 1" Silicone Heater Hose is a 10-foot, SAE 20R3–compliant coolant and heater hose built from braided polyester and silicone layers to handle -67°F to 356°F with a 60 psi working pressure. This heavy-duty heater hose is designed for automotive cooling and heating...- $110.94
- $110.94
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 10AN PTFE Fuel Hose 10FT Black — AN10 Nylon-Braided, E85-Resistant
EVIL ENERGY's 10AN PTFE fuel hose is a durable, 10-foot AN10-rated, nylon-braided PTFE line designed for E85, gasoline, diesel and high-temperature automotive fuel systems. This hose combines a smooth PTFE inner liner with a tough nylon braid to resist chemical attack, high temperatures and...- $102.59
- $102.59
- Unit price
- per
-
Vendor:Ruikarhop
Ruikarhop 3/4" x 10ft Fuel Transfer Hose — 300 PSI Working, Kink-Resistant for Gasoline & Diesel
Ruikarhop's 3/4" x 10ft fuel transfer hose is a reinforced, kink-resistant hose built to safely move gasoline, diesel, biodiesel and other petroleum liquids on farms and work sites. This 10-foot fuel hose combines a nitrile inner tube, braided fiber reinforcement and a durable PVC/nitrile...- $117.20
- $117.20
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/4" Fuel Hose 10 ft — NBR SAE 30R7, 200 PSI Oil-Resistant Flexible Line
EVIL ENERGY's 3/4" NBR SAE 30R7 fuel hose is a 10-foot, oil-resistant line designed for diesel, gasoline, biodiesel and other fuel system fluids with a 200 psi working pressure. This fuel hose delivers a balance of flexibility, chemical resistance and braided reinforcement for automotive...- $110.94
- $110.94
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN6 Nylon-Braided Fuel Hose 20ft Black — CPE Inner, 750 PSI Working Pressure
EVIL ENERGY 6AN 20FT nylon-braided CPE fuel hose is a high-pressure, corrosion-resistant fuel and fluid line designed for performance vehicles and industrial applications. This 20-foot black AN6 hose combines a CPE rubber inner tube, 304 stainless steel reinforcement, and a nylon outer braid to...- $113.02
- $113.02
- Unit price
- per
-
Vendor:Dianrui
Dianrui Hose Clamp Kit 222-Piece 6-70mm (304 Stainless) Worm-Gear Clamps with Box & Tools
Dianrui 222-piece hose clamp assortment supplies heavy-duty 304 stainless steel worm-gear clamps in ten sizes, plus screwdrivers and a spanner, all organized in a portable carry box. This comprehensive kit includes 220 corrosion-resistant hose clamps covering 6–70mm (1/4"–2-3/4") and two adjustment tools, designed to...- $117.20
- $117.20
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 4.0" V-Band Clamp Kit with Male/Female Flanges — 304 Stainless Steel, T-Bolt Quick-Release
EVIL ENERGY's 4.0-inch V-band clamp and matched male/female flanges join 4.0" ID to 4.0" OD pipe for a reliable, reusable seal in exhaust and turbo plumbing. This stainless-steel V-band kit streamlines connections where you need strong alignment, quick disassembly and a compact fit. Designed...- $98.42
- $98.42
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3.0" V-Band Clamp Kit with Male/Female Flanges — Stainless Steel, CrMo T-Bolt
EVIL ENERGY's 3.0-inch V-band clamp with male/female flanges is a stainless-steel coupling that securely joins 3.0" ID to 3.0" OD pipes for exhaust and turbo plumbing. This V-band assembly is engineered for repeatable, high-strength connections where fast disassembly and precise alignment matter. The kit...- $90.07
- $90.07
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 1/4" Fuel Hose 25ft SAE 30R7 NBR-lined 300 PSI – Braided Polyester, Flexible
EVIL ENERGY 1/4" Fuel Hose 30R7 is a 25-foot, NBR-lined, braided polyester fuel line built to handle gasoline, diesel, biodiesel and lubricants at up to 300 psi working pressure. This 25-foot push-lock fuel hose from EVIL ENERGY is engineered to meet SAE 30R7 standards...- $115.11
- $115.11
- Unit price
- per
-
Vendor:Fill-Rite
Fill-Rite fuel transfer hose 3/4 in x 12 ft FRH07512 — nitrile tube, 7" anti-kink spring guard
The Fill-Rite FRH07512 is a 3/4" x 12' professional fuel transfer hose built with a nitrile tube, neoprene cover, internal ground wire, and a 7" anti-kink spring guard for reliable service in demanding fueling jobs. Engineered for commercial and heavy-duty use, this replacement hose...- $109.73
- $109.73
- Unit price
- per
-
Vendor:Outus
Outus Silicone Heater Hose 1" ID 10ft Coil — Blue, Reinforced High-Temp Coolant Hose
Outus 1" ID, 10ft blue silicone heater hose is a flexible, high-temperature resistant coolant and radiator hose supplied in a 10-foot coil for cutting to fit custom engine cooling and heater lines. This reinforced silicone hose combines heat endurance and chemical resistance with pliability...- $113.02
- $113.02
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 5/16 in Fuel Hose SAE 30R7 NBR 20 ft — 300 PSI Oil-Resistant Diesel/Gasoline Line
EVIL ENERGY 5/16" SAE 30R7 NBR fuel hose — a 20-foot, oil-resistant fuel line rated for 300 psi working pressure and built for diesel, gasoline, biodiesel, and oil applications. This heavy-duty fuel hose combines a nitrile butadiene rubber (NBR) inner tube with braided polyester...- $104.68
- $104.68
- Unit price
- per
-
Vendor:Eoppen
Eoppen Spring Hose Clamp Kit 195-Pc (6–38mm) — 23 Sizes with Swivel-Tip Plier & Reinforced Case
Eoppen 195-piece spring hose clamp kit supplies 23 sizes of 65Mn steel clamps plus a swivel-tipped plier for fast, secure low-pressure hose and fuel-line connections. Whether you maintain cars, small engines, garden equipment, or household plumbing, this kit gives a comprehensive selection of low-pressure...- $112.19
- $112.19
- Unit price
- per
-
Vendor:Ruikarhop
Ruikarhop 3/8" ID Rubber Fuel Hose 25ft SAE 30R7 kit with 10 clamps — NBR fuel/oil resistant, −40°F to 257°F
Ruikarhop 3/8" ID Rubber Fuel Hose is a 25-foot SAE 30R7 NBR fuel line kit that resists gasoline, biodiesel and oils and ships with ten metal clamps for engine and fuel-system use. This heavy-duty fuel hose is engineered as a flexible replacement line for...- $96.33
- $96.33
- Unit price
- per
-
Vendor:Boltigen
Boltigen 3/4" NPT Fuel Transfer Hose — 10 ft, nitrile core with stainless-steel braid
Boltigen's 10-foot, 3/4" NPT fuel transfer hose is a heavy-duty, flexible line built for safe, leak-resistant transfer of gasoline, diesel, biodiesel and kerosene. This hose pairs a nitrile inner tube with stainless-steel braid and a durable PVC/nitrile outer jacket to deliver reliable fuel handling...- $108.85
- $108.85
- Unit price
- per
-
Vendor:YSIL
YSIL Fuel Line Hose 1" (25mm) ID 6.6ft — NBR Rubber, 300 PSI Oil & Heat Resistant
YSIL 1" (25mm) ID fuel line hose is a 6.6-foot NBR rubber push-lock line engineered for automotive fluid routing with high temperature, oil resistance, and up to 300 PSI working capability. This durable fuel hose combines a nitrile-butadiene (NBR) rubber compound with fiber cord...- $98.42
- $98.42
- Unit price
- per
-
Vendor:Togsher
Togsher 3/4" Fuel Transfer Hose 10 ft — 19mm ID with Male NPT Fittings, 150 PSI Rated, Stainless Braid
Togsher 3/4" Fuel Transfer Hose 10FT delivers a reinforced, flexible fuel line with male NPT fittings for safe, leak-resistant transfer of gasoline, diesel, biodiesel blends, kerosene and other petroleum products. This heavy-duty 3/4" (19mm ID) by 10-foot (3m) fuel transfer hose is engineered for...- $110.94
- $110.94
- Unit price
- per
-
Vendor:SecosAutoparts
SecosAutoparts Upper & Lower Radiator Hose Set — Chevy/GMC 2007–2014 Direct-Fit 2-Piece
SecosAutoparts upper and lower radiator coolant hoses replace worn factory lines to restore proper coolant flow and prevent leaks in Chevrolet, GMC, Yukon and Cadillac models from 2007–2014. These two-piece radiator hose replacements are designed for direct fitment to a range of GM trucks...- $104.47
- $104.47
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3.5" V-Band Clamp with 304 Stainless Flanges — Single T-Bolt, Compact Exhaust Joint
EVIL ENERGY's 3.5-inch V-band clamp with matching 304 stainless flanges securely joins 3.5" ID-to-3.5" OD pipes for exhaust and turbo applications. This V-band assembly pairs a male and female flange with a heavy-duty V-band clamp to create a compact, repeatable joint that’s simple to...- $94.25
- $94.25
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN6 Braided Fuel Hose 20ft — Black Nylon-Braided, 750 PSI Working Pressure
EVIL ENERGY's 6AN braided fuel line is a 20-foot CPE inner, 304-steel-reinforced, nylon-braided AN6 hose built for high-pressure fuel, oil, and fluid routing. This heavy-duty AN6 fuel hose combines a chemical- and heat-resistant CPE rubber core with a 304 stainless wire reinforcement and a...- $115.11
- $115.11
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 8AN Nylon-Braided Fuel Hose 10 ft Black — CPE Core, 750 PSI Working
EVIL ENERGY 8AN 10-foot CPE nylon-braided fuel hose is a high-pressure, temperature-resistant line built for fuel, oil, and coolant applications that require durable AN8 connections. This 10-foot AN8-rated fuel hose combines a CPE rubber core, 304 stainless-steel wire reinforcement, and a nylon outer braid...- $98.42
- $98.42
- Unit price
- per
-
Vendor:GELRIUNY
GELRIUNY 1/2" HVAC Vacuum Hose 6ft — 1/4" SAE to 1/2" Flare, 20 Micron Vacuum & 640 PSI Working
The GELRIUNY 6-foot 1/2" vacuum-certified HVAC hose is a high-flow refrigerant line with 1/4" SAE flare to 1/2" female flare fittings engineered for faster evacuation, safe recovery and durable field service. This heavy-duty refrigerant hose is built for HVAC technicians who need improved flow,...- $116.99
- $116.99
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/8 in Fuel Hose 30 ft — NBR SAE 30R7, 300 PSI oil-resistant and flexible
EVIL ENERGY's 3/8" NBR SAE 30R7 fuel hose is a 30-foot, oil-resistant line rated for 300 PSI working pressure and compatible with gasoline, diesel, biodiesel and oils. This heavy-duty aftermarket fuel line is engineered for fuel-system, oil-cooling and general petroleum transfer use where SAE...- $152.67
- $152.67
- Unit price
- per
-
Vendor:Torque
Torque 3/8" Rubber Air Brake Hose 50 ft Black — 225 PSI SAE/DOT Compliant Replacement
Torque 3/8" ID Rubber Air Brake Hose is a heavy-duty 50-foot black rubber coil engineered as a direct replacement for Continental 9003006, rated to 225 PSI and built for compressed air brake systems. This hose roll is designed for demanding commercial vehicle and equipment...- $158.93
- $158.93
- Unit price
- per
-
Vendor:METROVAC
METROVAC MVC-56D Replacement 10ft Heavy-Duty Dryer Hose — 1-1/2" PVC with Nozzle & Clamps
Replacement 10-foot heavy-duty hose for MetroVac pet and air-force dryers — durable PVC construction with included concentrator nozzle and clamps. When your dryer hose wears out, the MetroVac MVC-56D Heavy Duty Hose restores airflow and control without needing a full unit replacement. Designed to...- $173.26
- $173.26
- Unit price
- per
-
Vendor:Dorman
Dorman Engine Coolant Crossover Pipe 902-3102HP Aluminum — OE-fit, Leak-Resistant
Dorman's 902-3102HP is an aluminum replacement engine coolant crossover pipe engineered to directly match OE fit and routing while resisting the cracking and leaks common to the original plastic pipe. This upgraded crossover pipe replaces the factory plastic component with a durable aluminum design...- $117.22
- $117.22
- Unit price
- per
-
Vendor:Fill-Rite
Fill-Rite 1" SD100UL Multi-Plane Fuel Nozzle Swivel — Red 360° Rotation, Heavy-Duty Cast-Aluminum
The Fill-Rite SD100UL is a heavy-duty 1" multi-plane swivel that lets fuel nozzles rotate freely to reduce hose kinks, minimize operator strain, and extend hose life. The SD100UL swivel is a cast-aluminum swivel joint engineered for professional fuel transfer systems. It installs between a...- $146.41
- $146.41
- Unit price
- per
-
Vendor:EZPROIT
EZPROIT 48in Stainless Steel Flexible Radiator Hose Kit — Universal 48" braided coolant hose with adapters & clamps
EZPROIT's 48-inch stainless steel flexible radiator hose kit is a universal replacement solution that adapts to radiator necks and engine fittings while resisting heat, corrosion, and wear. This flexible coolant hose assembly swaps brittle rubber lines for a durable stainless steel braid that bends...- $140.15
- $140.15
- Unit price
- per
-
Vendor:ZONFANT
ZONFANT Chevy Cruze 6-Piece Engine Coolant, Heater & PCV Hose Kit — 2011–2016 1.4L, Direct-Fit OE Replacement
ZONFANT 6-piece engine hose kit replaces worn coolant, heater and PCV tubing to restore proper coolant flow and ventilation on compatible Chevy Cruze 1.4L models. This complete hose assortment includes every major service line needed when refreshing the cooling and PCV plumbing on 2011–2016...- $125.52
- $125.52
- Unit price
- per
-
Vendor:Gates
Gates Barricade Carburetion Fuel Line Hose 25' 1/4" ID — GreenShield 5-Layer Low-Permeation, Heat-Resistant
Gates 27313 Barricade Carburetion Fuel Line Hose is a 25-foot, 1/4" ID premium fuel hose built with Gates' five-layer GreenShield technology to minimize vapor permeation and resist heat and ozone. This fuel line is engineered for modern fuel blends and carbureted systems that demand...- $148.70
- $148.70
- Unit price
- per
-
Vendor:Tykick
Tykick Cold Air Intake Hose for Mini Cooper 1.6L N18 (R55–R61) — OE-Style Turbo Intake Boot, Heat-Resistant
Tykick's cold air intake hose is a direct-fit turbo intake boot engineered to replace worn or cracked intake pipes on Mini Cooper models with the 1.6L N18 engine (fits R55–R61 models). This replacement intake hose restores the sealed airflow path between the turbocharger and...- $127.63
- $127.63
- Unit price
- per
-
Vendor:YEHERIT
YEHERIT Coolant Hose & PCV Pipe Kit for Chevy Cruze 1.4L (6-Piece) — OE-Style, Heat-Resistant Replacement
Complete six-piece coolant hose and PCV tubing kit engineered to replace worn radiator, heater, and oil cooler hoses on 2011–2014 Chevy Cruze 1.4L engines. This YEHERIT hose set groups the main coolant circulation lines, a heater outlet hose, PCV tubing, and the engine oil...- $125.54
- $125.54
- Unit price
- per
-
Vendor:Torque
Torque 3/8in NPT Air Hose Repair Kit — 10‑Piece DOT 106/SAE J1402 Compliant, Pre-Sealed Swivel Fittings
Torque's 10-piece 3/8" NPT rubber air hose repair swivel fittings kit is a ready-to-install set of DOT 106 and SAE J1402–compliant parts for repairing 3/8" I.D. heavy-duty air lines. This repair kit gives technicians and fleet operators the parts needed to restore two damaged...- $125.54
- $125.54
- Unit price
- per
-
Vendor:DriveFix
DriveFix Radiator Coolant Hose Pipes Upper & Lower Set for GM 2014–2020 — Direct Fit, OE-Style
DriveFix upper and lower radiator pipes replace worn coolant hoses on select GMC, Chevrolet, and Cadillac V8 SUVs and trucks to restore proper coolant flow and fit factory routing. These two molded radiator pipes — an upper inlet and a lower outlet — are...- $140.15
- $140.15
- Unit price
- per
-
Vendor:Elyaspedy
Elyaspedy 1/2 in HVAC Vacuum Hose, 6 ft High-Flow Vacuum-Certified, 3200 PSI Burst
The Elyaspedy Upgraded 1/2" HVAC Vacuum Hose is a high-flow, vacuum-certified refrigerant hose designed for fast evacuation and safe refrigerant handling across common HVAC systems. This heavy-duty 1/2" internal diameter hose pairs a 6-foot length with rugged brass alloy fittings, PTFE-sealed interfaces, and a...- $116.99
- $116.99
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.













































