JDMSPEED

JDMSPEED 7-153 oil pressure gauge kit is a compact 0–100 PSI, 2-inch (52 mm) automotive gauge designed for universal 12V fitment with a chrome bezel and black face for clear, illuminated readings. This gauge kit gives a visible, mechanical-style readout of engine oil pressure...

JDMSPEED 1.98" stainless steel trailer axle bearing protectors are a pair of corrosion-resistant shields with silicone dust caps designed to keep water and debris out of 1.98" hub bores and extend bearing life. If you haul a boat, RV, ATV, snowmobile or utility trailer,...

JDMSPEED New Ignition Module GM HEI 4 Pin D1906HT LX301 is a direct-fit replacement ignition control module designed to restore spark control for compatible Buick, Chevy, Pontiac and other GM vehicles from the 1970s and 1980s. When an aging HEI ignition module fails, engines...

JDMSPEED replacement electric fuel pump for Polaris Ranger 400/500 (1999–2012) is a direct-fit, 12V brass fuel pump engineered to restore reliable fuel delivery and match OEM form, fit, and function. If your Polaris Ranger is showing fuel delivery issues, low fuel pressure, or stalling,...

JDMSPEED's New Fuel Filter Assembly with clear glass bowl is a direct-fit replacement for Ford and many vintage tractor models, designed to trap water and debris before fuel reaches the engine. This replacement fuel filter assembly replicates the fit and function of Ford part...

JDMSPEED 18K1773 Rear Parking Brake Hardware Kit is a direct-fit replacement assembly that restores the rear parking brake components for select Dodge Nitro and Jeep Liberty/Wrangler models. This professional-grade kit supplies the key clips, springs, and retainers needed to rebuild the rear parking brake...

JDMSPEED HW7311 rear parking brake hardware kit provides a full set of replacement components engineered to restore proper parking-brake function on compatible Chevrolet, Dodge, Ford, GMC and Ram trucks and vans. Whether you’re repairing a sticking handbrake or rebuilding the rear drum parking-brake assembly,...

JDMSPEED's 7-pin ignition lock cylinder starter switch is a direct-fit replacement for many GMC and Chevrolet trucks from the late 1960s through the 1970s and selected late-1980s medium-duty models, and it ships with two keys for immediate use. This ignition lock cylinder by JDMSPEED...

JDMSPEED stainless chrome door poppers are a pair of spring-loaded trunk and shaved-door poppers with rubber-tipped plungers that deliver reliable, adjustable popping action in a polished chrome finish. These JDMSPEED door poppers are designed to replace or upgrade factory latches on shaved doors and...

JDMSPEED left master power window switch is a direct-fit replacement for the driver-side control module on select Dodge Journey, Dodge Nitro, and Jeep Liberty models from 2008–2012 (driver-side auto window only). This replacement master switch restores control of all four power windows, door locks,...

A direct-fit JDMSPEED replacement fuel filler door housing (part 4L3Z9927936BA) designed to restore the fuel door assembly on Styleside Ford F-150 trucks from 2004–2008 and select Lincoln Mark LT models. This single-piece fuel filler door housing with hinge arrives ready to swap into compatible...

JDMSPEED 2" (52mm) water temperature gauge accurately displays engine coolant temperature from 40–130℃ (110–265℉) with a vintage-style dial and yellow LED for night visibility. This compact 52mm gauge offers a simple, reliable way to monitor your engine's coolant temperature. It runs on 12V DC,...

JDMSPEED replacement fuel filler door housing pocket is an OEM-fit, durable gas cap hinge assembly designed to restore proper fuel access on Ford F-150 Styleside (2009–2014) and Lincoln Mark LT (2010–2014) models. This replacement part restores the functional housing and hinge around the fuel...

JDMSPEED 5th wheel hitch puck cover plug trim ring kit is a direct replacement set (BC3Z-99000A25-A) that restores the factory puck openings on Ford F-250, F-350, F-450 and F-550 Super Duty trucks (2011–2023) for reliable gooseneck and 5th-wheel towing readiness. This kit supplies the...

JDMSPEED's 3" stainless steel V-band flange and clamp kit is a universal, heavy-duty replacement set designed to join turbo downpipes and exhaust components with a quick-release connection. This compact kit equips tuners and racers with a straightforward coupling solution: one 3-inch inner diameter clamp...

JDMSPEED HEI Distributor Cap and Rotor Kit 84335 is a red replacement set designed to fit Pro Billet and many aftermarket billet HEI distributors for 8-cylinder engines. This kit provides a direct-fit option for mechanics and enthusiasts who need to maintain or refresh their...

JDMSPEED four-piece rear parking sensor set replaces multiple GM OEM part numbers to restore your vehicle's backup detection quickly and affordably. If your Chevrolet, Cadillac, GMC, Buick or Saturn is exhibiting faulty or missing rear parking sensors, this JDMSPEED 4-pack provides compatible replacements designed...

High-quality JDMSPEED gloss-black B pillar molding designed to replace the front right (passenger side) door applique on Ford Explorer models from 2011 to 2016. This replacement B pillar trim restores the sleek, factory appearance of your Ford Explorer’s right front door area without costly...

JDMSPEED's automatic transmission shift lever replaces worn or broken factory levers to restore smooth, reliable gear selection on compatible Ford and Lincoln trucks and vans. This direct-fit replacement lever (part number 905-109 and many OEM cross-references) combines a metal core with ABS plastic trim...

JDMSPEED diesel fuel lift pump E8413 is a direct-fit replacement lift pump engineered to restore reliable fuel delivery on 6.5L Chevy and GMC trucks (1992–2002). This JDMSPEED pump replaces OE and common aftermarket numbers (E8413, E520, 8012, 15754298, OT18046, BGV100, P74222) and is supplied...

JDMSPEED Universal Electric Fuel Pump Kit is a 12V, low-pressure (3–6 PSI) inline pump package with a 6.56 ft 5/16" fuel line, upgraded filter, and clamps for carburetors, lawn mowers, boats, generators, and 12V engines. This complete pump kit combines a compact 12V plunger-style...

JDMSPEED's red HEI distributor cap and rotor kit is a complete replacement for K549-style Chevy small- and big-block engines, delivering a durable cap, rotor and coil cover to restore reliable spark distribution. If your engine uses a K549-compatible HEI distributor — common across Chevy...

Replacement HEI distributor cap and rotor kit engineered for small- and big-block Chevy engines (fits 283–400 SBC and 396–454 BBC) in a durable black finish. This JDMSPEED kit supplies a complete HEI-style distributor cap, rotor and matching black coil cover designed as a direct...

JDMSPEED Triple Gauge Set combines an oil pressure gauge, water temperature gauge, and voltmeter into one compact cluster for real-time engine monitoring. The JDMSPEED Triple Gauge Set is a universal 3-in-1 instrument cluster designed for most 12V cars, trucks, and performance builds. Each gauge...

JDMSPEED 8N9510C-HD is a heavy-duty, direct-fit replacement Marvel Schebler-style carburetor kit designed to restore reliable fuel delivery to Ford 2N, 8N and 9N tractors with 120ci flathead engines. This complete replacement unit includes the carburetor plus gaskets, screws, bolts and a fuel inlet so...

JDMSPEED's 60-pound solenoid kit is a compact electric popper engineered to open stubborn doors, trunks and hoods with up to 60 lb of pulling force. This compact kit delivers an electric pull strong enough for street rod panels, aftermarket trunk lids and custom hatches...

JDMSPEED spark plug wire set is a direct-fit aftermarket replacement for 1992–2000 Honda Civic and Del Sol D15/D16 engines, featuring 10.5mm spiral-wound cores and high-temp silicone boots for dependable ignition delivery. These replacement ignition wires are designed to restore reliable spark transfer and reduce...

JDMSPEED’s 2-inch triple gauge set combines oil pressure, coolant temperature, and voltage readouts in a single compact cluster for quick, accurate monitoring while driving. This compact gauge trio is engineered to give clear, essential engine information in a small footprint. Each instrument uses a...

High-quality JDMSPEED positive battery cable replaces OEM part numbers for many BMW E82/E88/E90/E91/E92 models and restores a secure positive battery connection. This replacement positive terminal battery lead from JDMSPEED is engineered to match OE fit and function for select BMW 1-series and 3-series models...

JDMSPEED's 9-inch slim 12V electric radiator fan kit is a universal, low-profile push/pull cooling solution that delivers up to 1730 CFM to help reduce under-hood temperatures and improve heat management. This compact fan assembly is built for easy installation on most radiators, intercoolers, condensers...

JDMSPEED's 12" universal slim electric radiator fan is a reversible push-pull cooling kit that delivers up to 800+ CFM in a compact 2.5" profile for easy mounting on most vehicles. This lightweight 12-inch fan assembly is designed as a bolt-on cooling solution for cars,...

JDMSPEED's 10" slim electric radiator cooling fan is a reversible 12V, 80W unit that delivers up to 1750 CFM for compact, high-output engine bay cooling. This compact cooling fan is designed as a universal drop-in for most cars, trucks, RVs and light commercial vehicles....

JDMSPEED High Performance Spark Plug Ignition Wires are a 10.2mm, spiral-wound ignition lead set built to restore reliable spark delivery and reduce electrical loss on 2000–2009 Chevy and GMC V8 engines. These replacement ignition wires are engineered as a direct-fit service part for a...

JDMSPEED's 10.5mm spark plug wire set is a full HEI-compatible replacement kit sized for small and big block Chevy engines, offering high-temperature silicone insulation, 90° boots on both ends, and a matched range of wire lengths for direct-fit swaps. This complete 8-wire harness is...

JDMSPEED wheel bearing greaser kit is a pair of precision aluminum grease tools (44mm and 40mm) designed to press grease into Polaris ATV and UTV wheel bearings without disassembling the hub. Keep routine bearing maintenance fast and clean: these greaser tools let you service...

This JDMSPEED kit replaces the fuel filter housing cap (134001) and includes a TP1015 filter plus two O-rings to restore a tight, corrosion-resistant seal and high-efficiency water separation for Duramax 6.6L L5P and compatible diesel engines. Designed as a direct-fit replacement for several GM...

JDMSPEED 24-piece chrome spike lug nuts (14x1.5) with a matching long socket provide an aggressive wheel look and keyed security for compatible GM and Ford vehicles. These replacement lug nuts are a complete set of 24 solid metal spike lugs finished in chrome and...

JDMSPEED Fuel & Oil Filter FD4616 / FL2016 is a direct replacement filter that protects Ford 6.0L Turbo Diesel engines by trapping contaminants in the fuel and oil before they reach critical components. This replacement filter fits Ford Super Duty models equipped with the...

JDMSPEED 10.5mm Racing Spark Plug Wires are a high-temperature, 100% silicone-insulated replacement set engineered to fit GM 5.0L and 5.7L V8 engines, restoring reliable ignition performance for Chevy, GMC, Cadillac and compatible Isuzu models. If your factory spark plug wires are cracked, brittle, or...

JDMSPEED red 10.5mm racing spark plug wires are a high-performance replacement set engineered for Ford small-block 5.0L and 5.8L (302) engines, offering low resistance, RFI suppression, and durable high-temp silicone boots. These aftermarket ignition wires are built to deliver reliable spark delivery under motorsport...

JDMSPEED's spare tire winch hoist is a direct-replacement underbody carrier designed to restore reliable spare tire lowering and raising on Silverado and Sierra pickup trucks. If the factory spare tire hoist on your Silverado or Sierra has seized, corroded, or lost its secondary latch,...

JDMSPEED’s complete carburetor kit replaces worn Marvel Schebler/Zenith units on Ford 2N, 8N and 9N tractors, restoring reliable fuel delivery and easier starting. If your vintage Ford tractor is running rough, idling poorly, or leaking fuel around the carburetor, this all-in-one JDMSPEED replacement is...

JDMSPEED 10.2mm spark plug wire set is a direct-replacement ignition wire kit engineered for classic Ford V8 engines including F-150 and Mustang 5.0L/5.8L SBF 302 Windsor applications. This wire set supplies ten 10.2mm ignition leads designed to replace worn or damaged factory wires on...

JDMSPEED HEI spark plug wire set replaces 90° distributor boots with straight plug-end boots for small- and big-block Chevy V8s, using 10.5mm high-temp silicone for reliable ignition routing. This complete set from JDMSPEED is built to fit popular Chevy V8 engines (350, 383, 400,...

JDMSPEED's New Heat 10.5mm spark plug ignition wire set is an eight-piece replacement designed to provide reliable high-temperature ignition performance for LSx engines (LS1, LS2, LS3, LS6, LS7) with spiral-wound conductor and silicone boots. This set of eight 10.5mm ignition wires is engineered for...

JDMSPEED 3186 iridium spark plugs with M8-48322 plug wires are a complete 8-cylinder ignition replacement kit engineered to restore reliable spark performance for many Chevy, GMC, Cadillac and related V8 engines. If your truck or SUV with a 5.3L, 6.0L or 6.2L V8 is...

JDMSPEED's Universal External In-Line High-Pressure Fuel Pump is a 12V electric gasoline injection replacement pump with adjustable pressure and heavy-duty brass/steel construction designed for universal fit applications. This compact, red 12V in-line fuel pump is built for gasoline injection systems where a reliable, high-flow,...

JDMSPEED replacement side mirrors are a pair of manual-folding, non-heated driver and passenger mirrors designed to fit Jeep Wrangler models from 1987–2002 and replace OEM CH1320102 / CH1321102. These mirrors are built for Wrangler owners who need a straightforward, durable swap for worn or...

JDMSPEED Fuel Tank Selector Switching Valve FV1T FV1 is a 3-port, 12V in-line selector valve that lets vehicles with one main and one auxiliary tank switch fuel supply between tanks safely and reliably. This compact, electrical three-way valve is designed to sit between the...

JDMSPEED 255LPH High Flow External Inline Fuel Pump is a universal external EFI pump and installation kit designed to replace GSL392/400-939 style pumps and support performance engines up to about 650 HP. If you need a drop-in external fuel pump with higher flow and...