RV Heating & Ventilation

Living in a Bubble's magnetic insulated roof vent cover blocks light and insulates a 16.5" x 16.5" MaxxAir or Fantastic fan opening for improved temperature control and privacy. This magnetic vent sun cover fits standard 16.5" x 16.5" RV roof fan openings and uses...

RVGUARD's 2-pack 14-inch white RV roof vent covers are universal replacement lids that protect, ventilate, and upgrade standard RV roof vents with a low-profile, UV-resistant design and a full installation kit. If your RV, camper or trailer has older, cracked, or missing vent lids,...

Sthovd 3103634.022 is a direct-fit white RV refrigerator vent lid cover designed to replace deteriorated Dometic vent bases quickly and without modification. If your Dometic RV refrigerator vent has become cracked, discolored, or loose from years of sun, rain, and road vibration, this Sthovd...

Eazy2hD RV Furnace Vent Cover Screen is a complete stainless-steel mesh kit designed to protect RV furnace, refrigerator and water heater vents from pests and debris while preserving airflow and appearance. Keep your RV vents clear and functioning without sacrificing looks. This kit includes...

EcoSynic One Piece RV A/C Gasket is a universal 14" inner / 17" outer roof seal kit designed to stop leaks and cut vibration for camper, trailer, and motorhome rooftop air conditioners. When an aging rooftop air conditioner gasket starts letting in water, creating...

Safoner's aluminum RV range vent cover is a rust-resistant, adjustable exterior exhaust replacement that keeps camper stove ventilation sealed, quiet, and weatherproof. The Safoner Aluminum RV Range Vent Cover replaces fragile plastic exhaust hoods with a sturdy aluminum unit engineered for long-term outdoor use....

Jack Boss 14-inch RV vent covers are a two-pack replacement set designed to protect and ventilate camper, trailer, and motorhome roof vents while withstanding UV exposure. This replacement set includes two 14 x 14 x 3.25 inch vent lids plus hardware—13 screws, 13 nuts,...

Hon&Guan 3" Diesel Heater Hose Kit is a complete flexible ducting set designed to route warm air from 5KW–8KW diesel parking heaters, featuring two 8ft hoses, an adjustable Y splitter, outlet pipe, vents, and clamps for a fast, secure installation. This kit provides the...

Safoner's 14" x 22" RV Vent Insulator is a waterproof, non-slip skylight cover with 2.8" foam and a reflective surface that blocks heat, light, and drafts for camper shower vents. Designed specifically for 14" x 22" RV and camper shower skylights, this vent insulator...

Camp'N 14" Universal RV Roof Vent Cover is a two-pack of 14x14 white replacement lids designed to protect and ventilate trailers, campers, and motorhomes. Replace cracked or yellowed vent lids with these purpose-built 14-inch covers that fit most standard RV roof vents. Constructed for...

Safoner's 14" x 14" RV Vent Insulator is a removable, double-layer skylight cover with 2.8" foam that blocks light and heat while fitting standard camper vents. Designed for travel trailers, motorhomes and camper vans, this vent insulator combines reflective fabric, thick foam core and...

Replacement vent-free blower fan kit designed to circulate warm air from Mr. Heater 20,000–30,000 BTU radiant and blue-flame natural gas or propane heaters. This accessory is the OEM fan assembly built to fit Mr. Heater vent-free models rated between 20,000 and 30,000 BTU. It...

ONLTCO Expert RV Vent Lid Replacements (2-Pack) are universal 14"×14" white vent covers with durable metal hinges designed to replace worn or broken roof vents on campers, trailers, and motorhomes. If your RV vent is cracked, yellowed, or no longer sealing properly, swapping it...

Wadoy RV Bug Screens for Refrigerator Vents & Water Heater Cover is a complete stainless-steel mesh kit that blocks insects and debris while preserving ventilation for RV fridges, furnaces and water heaters. Engineered for travel and outdoor use, this kit supplies multiple mesh shapes...

Supermotorparts 3-pack 14" x 14" vent covers are durable, low-profile replacement lids for RVs, campers and enclosed trailers that keep out rain and let air flow freely. If your Ventline (pre-2008), Elixir (from 1994), or similarly sized vent lids are cracked, yellowed, or no...

The RotoVent RV Sewer Vent is a self-rotating 360° vent cover that channels breeze to draw odors from RV holding tanks, keeping interior air fresher without power or active maintenance. Designed for RV owners who want a passive, durable way to reduce unpleasant smells,...

WanDwel’s aluminum RV exhaust range vent cover replaces brittle plastic vents with a no-cut, adjustable, weatherproof solution for microwave and stove exhaust openings. Whether you’re replacing a cracked plastic vent or upgrading to a tougher, travel-ready cover, this WanDwel unit is built for RV...

caqeg 14" universal roof vent cover 2-pack replaces worn or broken RV, trailer, camper and motorhome vent lids to restore ventilation and weather protection. If your RV vent lids are cracked, yellowed, or letting in drafts and leaking when it rains, this caqeg two-pack...

Safoner's Aluminum RV Plumbing Vent Cap is a heavy-duty camper roof vent cover designed to replace damaged plastic vents, protect your trailer plumbing from debris, and endure harsh weather. If your motorhome or travel trailer has a cracked or brittle plastic plumbing vent, this...

Safoner's 14" x 14" aluminum RV roof vent cover is a heavy-duty replacement lid and hardware kit designed to restore ventilation, keep out rain, and resist corrosion on compatible camper vents. When your RV vent lid is cracked, faded, or leaks, swapping in a...

Compact, two-speed cabin fan for trucks, RVs and versatile workspace ventilation that mounts to dash or side panels for directional airflow. This Dorman 7-941 two-speed fan is a rugged, compact air mover built to bring targeted ventilation to vehicle cabins, workshops, and other confined...

The RVGUARD 14x14 universal roof vent fan is a white, 12V manual RV vent that fits standard 14" x 14" openings to provide reversible airflow for intake or exhaust and straightforward DIY replacement or upgrade. This vent fan is built to be a practical,...

VTNPQ 10-20968 / 1020968 is a direct-fit 12V D-shaft replacement motor built to restore quiet, efficient ventilation to compatible RV roof fans. If your RV vent fan has grown noisy, lost power, or stopped spinning, this motor replacement offers an easy, reliable swap without...

The QHHR 3316230.000 / 3316230.700 RV wall thermostat with relay box is a direct-replacement control that lets you monitor and change your camper’s air-conditioner temperature with a clear LCD and built-in relay. If your Dometic-compatible RV air conditioner needs a reliable wall-mounted control, this...

The Dometic K8017-00 Fan Blade and Motor Assembly is a complete replacement kit that restores airflow in compatible standard Fan-Tastic Vents by supplying a new motor, fan blade and bowtie mounting bracket. If your RV or camper vent has a worn motor, cracked blade,...

EPJHKBE Dashboard Center Air Vent is a direct-fit replacement for Honda CR-V models from 2007 through 2011, restoring smooth airflow control and a factory-fresh look. If the center vent on your CR-V is cracked, stuck, or faded, this replacement assembly is built to slip...

QWORK's 14 x 14 manual RV roof vent replaces standard trailer vents with a one-piece leak-resistant frame and a white translucent lid that admits light while ventilating interiors. This vent is engineered for RVs, trailers, and campers with roof thicknesses from 1-1/4" to 2-1/4"....

STMGW's 14" RV Roof Vent with a white lid and inner garnish ring is a watertight, easy-to-install roof vent that improves airflow while protecting your camper from weather and leaks. This 14-inch vent assembly fits common camper and trailer cutouts and combines a durable...

Ventline V2094SP-28 is a 12-volt powered 14" x 14" Ventadome with a reinforced slide mechanism, removable two-piece screen, and an aerodynamic polypropylene dome for durable, low-noise ventilation. This Ventline Ventadome combines a reliable 12-volt lift with design upgrades that make operation smoother, cleaning faster,...

RALZAOTO's 5.5" (140mm) dual 12V RV refrigerator ventilation cooling fan is a compact, low-noise kit that boosts airflow behind RV fridges to help maintain cooler compressor temperatures. Compact and purpose-built for recreational vehicles, this dual-fan vent upgrade replaces smaller stock fans to move more...

feeoveo's RV Vent Motor Replacement Kit is a full motor-and-blade assembly with a 12" clear fan blade and a 1200 CFM motor made to restore strong, quiet ventilation to most standard RV roof vents. If your RV vent has lost power, become noisy, or...

Livpow's 14" x 14" manual RV roof vent kit is a hand-cranked, no-wiring ventilation solution with a durable black polypropylene lid, built-in insect screen, and a one-piece leak-resistant frame for 14"x14" roof openings. Fresh airflow and reliable weather protection are essential for comfortable RV...

The GDDGHS 14x14" RV roof vent is a universal, manually operated camper vent that provides reliable air circulation, weather resistance, and a protective screen for trailer bathrooms and living spaces. This compact roof vent is built to fit the common 14" x 14" cutout...

Camco Roof Vent Cover (Smoke 21016) is a low-profile, aerodynamic RV vent hood that keeps air flowing while preventing rain and insects from entering. This vent cover replaces or fits over standard 14” x 14” roof vents to provide continuous ventilation whether parked, driving,...

feeoveo's 14" x 14" smoke dome roof vent lid is a direct-fit replacement for Fantastic Fan vents, featuring a durable smoke-tinted dome and a built-in stainless steel insect screen. If your RV, camper, trailer or motorhome needs a new vent cover, this feeoveo lid...

The Uueego 5.5" (140mm) dual 12V RV ventilation fan system boosts airflow behind your refrigerator and through grille vents to help maintain cooler operating temperatures with adjustable automatic or manual speed control. If your RV fridge struggles in hot weather or when parked without...

The RVMATE 14x14 Universal RV Roof Vent Fan is a 12V, manual airflow vent designed to fit standard 14"x14" roof openings and improve air circulation in campers, trailers, and motorhomes. This compact white vent fan replaces most factory 14x14 vents to bring steady ventilation...

RVMATE’s 14"×14" RV roof vent fan is a 12V, remote-controlled, reversible ceiling vent designed to replace standard openings and improve airflow in campers, trailers, and motorhomes. This white, weather-resistant vent unit fits the common 14"×14" roof opening on most recreational vehicles and includes a...

The MAXXAIR Maxx I+ RV Roof Vent Cover is a low-profile, zero-leak replacement cover designed to protect 14" x 14" RV roof vents while allowing continuous ventilation in all weather. Built by MAXXAIR, a trusted RV ventilation brand since 1989, the Maxx I+ combines...

Camco's RV Roof Vent Cover is a durable, aerodynamic resin hood that fits over 14" x 14" vents to provide continuous airflow, weather protection, and built-in insect screening while allowing vent operation. This vent cover replaces standard dome-style vents with a low-profile, high-flow alternative...

Camco's Standard Roof Vent Cover (21015) is a black, aerodynamic 14" x 14" RV vent lid that keeps vents open in rain, improves airflow, and unclips for easy cleaning. This vent cover is built to let fresh air and natural light into your RV...

The GDDGHS 14x14" RV Roof Vent with a 12V fan is a universal rooftop vent assembly that improves airflow, blocks rain, and fits standard 14" x 14" openings on trailers and campers. When you need steady ventilation for a camper, trailer or motorhome, this...

caqeg’s 14" universal RV roof vent is a ready-to-install white-lid vent kit with a reversible 12V fan and 6" blades designed for camper trailers, motorhomes, and caravans. This vent kit fits a 14" x 14" roof opening and works with roof thicknesses from 1-1/4"...

Aoteda Soft Start for RV Air Conditioner reduces AC startup current so your RV, camper, or motorhome can run its air conditioner reliably on smaller generators or limited shore power. When camping or traveling in an RV, the compressor surge of a rooftop air...

The TITAN 12V DC RV Fridge Ventilation Cooling Fan (TTC-SC60(A)) is a long-shaped, weatherproof vent fan built to lower refrigerator compartment temperatures in American-style RV side vents with easy installation and adjustable temperature control. Keep your RV fridge running more efficiently while camping with...

Camco RV Roof Vent Kit (model 40480) is a direct-fit replacement vent that seals out water, admits daylight through a UV-resistant translucent lid, and keeps insects out with a built-in screen. Replace worn or leaky vents with a durable, lightweight roof vent designed to...

The Coleman-Mach Soft Start Kit (1497-3601) reduces the startup amperage of compatible RV air conditioners to smooth compressor startup and lower electrical stress. Designed for Coleman-Mach rooftop units, this soft start kit cuts inrush current by as much as 75% and moderates the initial...

The AC Infinity CLOUDPLATE T1 is a 1U rack-mounted exhaust fan panel that delivers programmable, low-noise airflow (20–60 CFM) to protect and cool rack-mounted AV, network, and server equipment. Compact and engineered for professional racks, the CLOUDPLATE T1 combines six dual-ball-bearing fans inside an...

MICRO-AIR EasyStart Breeze 399 is a compact soft-start module that reduces your RV air conditioner’s startup current so you can run rooftop AC from smaller generators and shore power without tripping breakers. Whether you’re boondocking or trying to avoid expensive generator upgrades, the EasyStart...

LEUNGOO's F48AE48A61 3314471.011 is a direct-fit replacement 1/4HP RV air conditioner fan motor engineered to restore reliable airflow in Dometic Duo-Therm Penguin II units. When an RV rooftop AC fan motor fails, you need a dependable replacement that matches the original specifications so the...