-
Vendor:SEHNSUCHT
SEHNSUCHT Driver Pulley Replacement for 6.5HP Engines — 3/4" Bore 6" Iron Torque-Converter Driver
SEHNSUCHT Driver Pulley Replacement is a 6" diameter, 3/4" bore iron torque-converter driver designed to replace Comet 30-series clutches on 6.5HP (212cc) go karts, mini bikes and similar engines. This replacement driver wheel is engineered for machines using a straight 3/4" (19 mm) crankshaft...- $78.60
- $78.60
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Centrifugal Clutch 3/4" Bore for Minibike & Go-Kart, Fits #40/#41/420 Chain, 2–6.5HP
SEHNSUCHT centrifugal clutch with a 3/4" (19.05mm) bore designed to transfer power from 2–6.5HP small engines to #40/#41/420 chains for minibikes, go-karts and Honda clone motors. This heavy-duty replacement clutch is built to bolt directly to 3/4" crankshafts commonly found on minibikes MB165/MB200, Baja-style...- $72.34
- $72.34
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Go-Kart Clutch 5/8in Bore 11T for #35 Chain — 97cc/2.8HP Fit, Steel Centrifugal
SEHNSUCHT heavy-duty go-kart clutch with a 5/8" (0.625") bore and 11-tooth sprocket for #35 chain, built to fit most 97cc (approximately 2.8HP) small engines and minibike applications. This durable centrifugal clutch is engineered for minibikes, go-karts, mini choppers, small garden equipment and other light-vehicle...- $71.29
- $71.29
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT centrifugal clutch kit 3/4" bore 10T sprocket with #420 chain for Predator 212 & Honda-clone (2–6.5HP)
SEHNSUCHT's centrifugal clutch kit gives minibikes and small go-karts a bolt-on 3/4" bore drive solution with a 10-tooth sprocket and #40/#41/#420 chain compatibility for engines from 2 to 6.5 HP. This kit was made for hobbyists and small-vehicle builders who need a reliable clutch...- $81.73
- $81.73
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Go-Kart Centrifugal Clutch 3/4" Bore 12T with 4 ft #35 Chain — Fits Predator 212 & Honda GX, 2–6.5 HP, 2300 RPM engage
SEHNSUCHT’s centrifugal clutch kit for 3/4" crank shafts delivers smooth, automatic power transfer for small go-karts and engines from 2 to 6.5 HP. This complete clutch assembly pairs a 12-tooth, 3/4" bore centrifugal clutch with a 4 ft #35 chain and hardware designed to...- $81.73
- $81.73
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT GY6 50cc Clutch & Variator Kit - 139QMB Complete Assembly with 669 Belt, 16×13mm Rollers
Complete replacement clutch and variator kit for GY6 50cc 139QMB engines, including front clutch, variator assembly, and 669 belt for a ready-to-install drivetrain refresh. If your GY6 50cc scooter or ATV is showing slipping, sluggish acceleration, or uneven engagement, this SEHNSUCHT Fit for Gy6...- $115.11
- $115.11
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Trailer Idler Hub Kit 5-Lug 4.5" Bolt Set-2 for 3,500 lb Axles — Tapered 1-1/16"–1-3/8", Plated Iron
SEHNSUCHT Trailer Idler Hub Kit is a 5-lug, 4.5" bolt-pattern wheel hub assembly designed for 3,500 lb trailer axles and tapered spindles from 1-1/16" to 1-3/8" — sold as a pair with bearings, seals, dust caps and hardware. This complete hub set supplies the...- $168.44
- $168.44
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Trailer Idler Hub Kit 5x4.5 in, Set of 2 Hot-Dip Galvanized for 3500 lb Axles, Fits 1-1/16 to 1-3/8 in Tapered Spindles
SEHNSUCHT Trailer Wheel Idler Hub Kit is a two-piece, hot-dip galvanized 5-hole 4.5" hub set engineered to fit 1-1/16" to 1-3/8" tapered spindles on 3,500 lb trailer axles. This kit supplies everything needed to replace worn idler hubs on common 3,500 lb trailer axles:...- $175.52
- $175.52
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Trailer Brake Drum Kit — 5x4.5" Bolt Circle for 3500 lb Axles, Includes Bearings & Seal
SEHNSUCHT Trailer Brake Drum Kit is a complete, corrosion-resistant replacement hub and drum assembly sized for 3500 lb axles with a 5×4.5" bolt circle. This kit supplies the hub/drum, bearings, seal, dust cap and hardware you need to restore braking components on trailers and...- $183.05
- $183.05
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT A-Frame Trailer Jack 5,000 lb Top-Wind — 15 in Lift, Black Sandblast Finish
The SEHNSUCHT A-frame trailer jack is a heavy-duty, top-wind manual jack that lifts up to 5,000 lbs and provides 15 inches of vertical travel for secure, corrosion-resistant support of trailers, campers, and boats. Built to withstand road use and harsh weather, this A-frame jack...- $144.32
- $144.32
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Super 30 Series Torque Converter Driver Clutch — 3/4" Bore for 2–8HP Engines, Faster Engagement & Includes Drive Belt
SEHNSUCHT Super 30 Series Torque Converter Driver Clutch is a drop-in torque converter assembly designed for 30-series TAV kits with a 3/4" (19mm) bore, offering faster engagement and higher torque for 2–8 HP small engines. This torque converter clutch replaces worn or stock clutches...- $142.24
- $142.24
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Gy6 125/150cc High-Performance Clutch & Variator Kit — 743 Belt, Iron/Aluminum Build
Complete high-performance clutch and variator kit designed for Gy6 125cc/150cc 152QMI and 157QMJ engines, including a matched 743 belt for improved durability and torque transfer. This SEHNSUCHT kit bundles the main transmission components you need to refresh or upgrade a small-displacement scooter or ATV...- $146.41
- $146.41
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT 12" x 2" Trailer Brake Drum Kit 8-Lug (8 on 6.5") for 7000 lb Axles — Electroplated Cast Iron Hub with Bearings & Seal
SEHNSUCHT's 12" x 2" 8-lug trailer brake drum kit is a direct-replacement hub drum assembly designed for 7000 lb axles using an 8 on 6.5" bolt pattern and #42 spindle fitment. This complete hub/drum assembly is engineered for trailers, RVs and semi applications where...- $311.24
- $311.24
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT 12 x 2 in Trailer Brake Drum Kit, 6-Hole 5.5 in Bolt Circle — Electroplated Iron for 5200–6000 lb Axles
SEHNSUCHT's 12" x 2" trailer brake drum kit is a complete, corrosion-resistant replacement hub assembly engineered for 6-hole, 5.5" bolt-circle spindles on 5200–6000 lb axles. This replacement brake drum kit bundles a 12" x 2" iron drum with essential bearings, seal, dust cap and...- $284.12
- $284.12
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT 130A Alternator for Chevy Malibu/Impala & Buick Regal/Envision — 2.0L/2.5L Direct-Fit, Quiet High-Output
SEHNSUCHT's new 130A alternator replaces OE units on select Chevy and Buick 2.0L/2.5L models to restore reliable 12V electrical charging with quieter operation. This replacement alternator is built as a direct-fit, high-output unit designed to match several OEM part numbers and fit a range...- $271.37
- $271.37
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Alternator for Toyota 3.5L V6 – 150A 12V Direct Replacement (Sienna/Highlander 07–16)
The SEHNSUCHT 11326 is a brand-new 12V, 150A direct-replacement alternator engineered for Toyota and Lexus 3.5L V6 vehicles including Sienna and Highlander models from the 2007–2016 range. This aftermarket alternator is built to match OE electrical output and fitment for select Toyota and Lexus...- $261.15
- $261.15
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Alternator 12V 150A for Ford Escape Fusion Focus Transit Connect & Mazda Tribute — 2.5L/2.0L Direct-Fit, OEM-Style
SEHNSUCHT 12V 150A alternator is a new direct-replacement unit engineered to restore charging performance on compatible Ford and Mazda 2.0L and 2.5L vehicles. This heavy-duty alternator fits a range of Ford and Mazda models, including Escape, Fusion, Focus, Transit Connect, Tribute, Mariner, and Milan...- $309.76
- $309.76
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Alternator for Toyota Camry 2.4L L4 (2007–2009) — 12V 100A, Aluminum Housing
The SEHNSUCHT 11195 is a brand-new 12V, 100A alternator engineered as a direct-fit replacement for select Toyota 2.4L (L4) gasoline models from 2007–2009 (not compatible with hybrid vehicles). This replacement alternator is designed to restore charging system performance on compatible Toyota and Scion models....- $239.66
- $239.66
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT CVT Torque Converter for 6.5HP 3/4" Engine — 6" Driven Pulley, 3 Belts, #35/#40 Sprockets
SEHNSUCHT CVT Torque Converter 30 Series is a drop-in replacement clutch and driven pulley kit for 3/4" straight-crank 6.5HP (212cc) horizontal engines used on mini bikes, go-karts, and small utility vehicles, supplied with three belts and two sprockets. Designed to replace Comet TAV2 Torq-A-Verters...- $194.40
- $194.40
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Trailer Electric Brakes 12" x 2" Pair (Left + Right) for 5200–7000 lb Axles — Manual Adjust, 5-Bolt Fit
SEHNSUCHT 12" x 2" electric trailer brake pair (left + right) is a bolt-on replacement set designed to restore reliable stopping power for 5200–7000 lb axles. If your trailer needs new electric brakes, this matched left-and-right set from SEHNSUCHT gives you a direct-replacement option...- $267.43
- $267.43
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Trailer Electric Drum Brakes 10 x 2-1/4 in Set of 4 for 3,500 lb Axles, 4-Hole Mount, Preassembled
SEHNSUCHT's kit includes two left and two right 10" x 2-1/4" electric drum brakes engineered to bolt onto standard 4-hole 3,500 lb trailer axles for dependable stopping power. These electric brake assemblies are a direct replacement option for many 3,500 lb trailer axles (compatible...- $442.69
- $442.69
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT 10" x 2-1/4" Electric Trailer Brakes — 1 Pair (Left & Right), 3,500 lb Axle, 4-Hole Mount, Manual Adjust
SEHNSUCHT's 10" x 2-1/4" manual-adjust electric brake assemblies deliver a pair of left and right units engineered to stop 3,500 lb trailer axles reliably when wired into your trailer's braking system. These bolt-on electric brake assemblies are built for common 4-hole mounting patterns and...- $217.35
- $217.35
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Trailer Electric Brake Kit — Pair 10" x 2-1/4" Manual Adjust, 5-on-5" Hubs for 3500 lb Axles
SEHNSUCHT's kit includes two 5-on-5" brake drums and a matched pair of 10" x 2-1/4" manually adjusting electric brakes engineered for 3,500 lb trailer axles (fits 1-1/16" to 1-3/8" spindles; not for 5-on-4.5" or Nev-R-Lube axles). This all-in-one replacement assembly combines corrosion-resistant iron drums,...- $599.18
- $599.18
- Unit price
- per
-
Vendor:SEHNSUCHT
SEHNSUCHT Trailer Electric Brake Kit — Pair 10in x 2.25in 5‑Hole Drums, Self‑Adjusting for 3500 lb Axles
SEHNSUCHT Trailer Axle Electric Brake Kit is a complete pair of 10" x 2.25" self‑adjusting electric brakes and 5‑hole, 4.5" bolt circle brake drums engineered to replace worn components on 3,500 lb axles. This kit bundles the drum assemblies, self‑adjusting electric brake shoes, bearings,...- $607.53
- $607.53
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.