-
Vendor:Sunluway
Sunluway Harmonic Balancer Socket 19mm for Honda — 77080 1/2" Drive, Deep Counter-Weighted Impact Socket
The Sunluway Harmonic Balancer Socket 77080 is a heavy-duty 19mm impact socket built to remove Honda crank pulley bolts by directing extra mass and torque while preventing slippage. If you work on Honda engines that use a 19mm hex crank bolt, this Sunluway 77080...- $54.37
- $54.37
- Unit price
- per
-
Vendor:Sunluway
Sunluway 6599 Fuel Tank Lock Ring Tool — 7.25" OD Fuel Pump Sender Wrench, 7-Notch, 1/2" Drive
Sunluway 6599 is a heavy-duty fuel tank lock ring tool designed to remove and install 7.25" OD metal fuel pump lock rings quickly and without damaging the tank. If you service fuel pumps, senders, or fuel-sending units, the Sunluway 6599 tool gives you a...- $54.60
- $54.60
- Unit price
- per
-
Vendor:Sunluway
Sunluway Front-Load Washer Bearing & Tub Seal Kit — LG/Kenmore Fit, Pre-Lubricated Bearings & Fluoro/Silicone Seals
Sunluway front-load washer bearing and tub seal kit replaces worn seals and bearings to stop leaks, reduce noise, and restore smooth drum rotation. If your front-load washer is noisy, leaks from the front, or vibrates excessively, worn tub bearings and seals are often the...- $58.77
- $58.77
- Unit price
- per
-
Vendor:Sunluway
Sunluway 22mm Harmonic Balancer Impact Socket — Deep Counterweighted 6‑Point for 1/2" Drive
Sunluway's 22mm harmonic balancer socket is a deep, counterweighted 6-point impact socket engineered to remove stubborn 22 mm hex crank or pulley damper bolts with increased torque and reduced slippage. This specialized socket is built for engines that use a 22mm hex crank bolt...- $59.84
- $59.84
- Unit price
- per
-
Vendor:Sunluway
Sunluway 24mm Crank Bolt Impact Socket for GM LS Engines — Deep 6-Point Counter-Weighted, 1/2" Drive
Sunluway 77070 is a heavy-duty 24mm deep impact socket engineered to remove and install crankshaft pulley (harmonic balancer) bolts on GM LS engines without holding the crankshaft. Designed for mechanics and DIYers who work on GM LS-series V8s, this counter-weighted, 6-point impact socket delivers...- $59.42
- $59.42
- Unit price
- per
-
Vendor:Sunluway
Sunluway CV Axle Removal Tool Set 12020 – 2-Piece Wedge Fork & Shim, Heat-Treated Steel for Inner Axle Popper
Sunluway’s 12020 2-piece CV axle removal tool set is a drop-forged fork-and-shim kit engineered to break free stubborn inner CV axles from transaxles safely and with controlled leverage. When a front-wheel-drive vehicle’s inner half shaft refuses to budge, improvised prying can damage seals, bearings,...- $74.44
- $74.44
- Unit price
- per
-
Vendor:Sunluway
Sunluway crank pulley tool kit — 19mm harmonic balancer socket + 50mm pulley holder, counter-weighted 1/2" drive
Sunluway's two-piece crank pulley kit pairs a deep, counter-weighted 19mm harmonic balancer socket with a 50mm hex crank pulley holder to safely remove and install crankshaft bolts on many Acura and Honda engines. This compact set is built for engine service tasks that require...- $71.29
- $71.29
- Unit price
- per
-
Vendor:Sunluway
Sunluway harmonic balancer puller 25264 — 3-jaw clip-in crank pulley remover for GM LS & Chrysler
The Sunluway 25264 harmonic balancer puller is a heavy-duty 3-jaw crank pulley remover designed to extract LS and select Chrysler/Jeep/Dodge engine dampers quickly without removing the radiator. This professional-grade puller fits a broad range of GM LS engines and many Chrysler/Dodge/Jeep V6 and V8...- $81.73
- $81.73
- Unit price
- per
-
Vendor:Sunluway
Sunluway Hi-Lift Jack Mount for Jeep Wrangler JK/JKU JL/JLU (2007–2024) — No-Drill Steel Powder-Coated Bracket
Sunluway Hi Lift Jack Mount secures a Hi-Lift jack to your Jeep's hood or door hinge for safe, no-drill storage on JK/JKU and JL/JLU models (2007–2024). Keep a Hi-Lift jack close at hand without modifying your Jeep. This Sunluway bracket is engineered to fasten...- $76.53
- $76.53
- Unit price
- per
-
Vendor:Sunluway
Sunluway Rear Axle Nut Wrench 10.5-inch Rear Spindle Socket for Ford F-250/F-350/F-450 — CR-MO Steel, 4-lug Center Tube
Sunluway 27353 is a 10.5-inch rear axle spindle nut socket designed to remove and install rear hub/axle nuts on 2003-and-newer Ford F-250, F-350 and F-450 Super Duty trucks. Designed as a direct-fit replacement for OEM part numbers like Ford 205-448, OTC 6601 and 27353,...- $79.24
- $79.24
- Unit price
- per
-
Vendor:Sunluway
Sunluway 5.3L LS Ignition Coil Brackets Mount Kit — 8-Coil Valve Cover Mount, Aluminum/Steel Hardware
Sunluway's 5.3L LS ignition coil brackets securely fasten eight coils to LS-series valve covers for a reliable, OEM-style installation. These coil mounting brackets are precision-engineered for LS-family V8 engines, designed to accept D581, D514A, D510C and similar coil styles. Constructed from a blend of...- $74.03
- $74.03
- Unit price
- per
-
Vendor:Sunluway
Sunluway 522 Large Gear and Pulley Puller — Model 522 (Black), 2–7¾" Spread, 11-5/8" Forcing Screw, Hardened 4140 Steel
The Sunluway 522 is a heavy-duty large gear and pulley puller designed to remove gears, pulleys, and tapped-hole components quickly and safely. This puller is built to handle demanding shop and home-mechanic tasks where a robust, adjustable extractor is required. Modeled to match common...- $93.22
- $93.22
- Unit price
- per
-
Vendor:Sunluway
Sunluway Front Crankshaft Seal Installer for 6.7L Power Stroke (2011–2021) — Carbon Steel, Adapter for 2011–2019
The Sunluway 303-1509 / 303-1509-01 is a heavy-duty front crankshaft seal installer designed to correctly seat the 6.7L Power Stroke front crankshaft oil seal on Ford Super Duty trucks from 2011–2021 without damaging the seal. This installer kit is precision-machined from carbon steel and...- $114.51
- $114.51
- Unit price
- per
-
Vendor:Sunluway
Sunluway Harmonic Damper Pulley Holding Tool for Toyota 3.4L V6 — 42CrMo Steel, Two‑Pin Crankshaft Holder
Sunluway's harmonic damper pulley holding tool locks the crankshaft pulley solidly in place so you can remove or torque the crank bolt on Toyota 3.4L V6 engines without the pulley turning. This precision-designed crankshaft holder is built specifically for Toyota 3.4L V6 applications—including Tacoma,...- $104.68
- $104.68
- Unit price
- per
-
Vendor:Sunluway
Sunluway Locker Sensor Bypass Harness for Jeep Wrangler JL & Gladiator JT 2018–2026 — OEM-Style Plug-and-Play Fix
The Sunluway Z-LKR-OEM is a plug-and-play locker sensor bypass harness that restores reliable axle locker operation and eliminates the “Service Axle Locker” error and blinking light on compatible Wrangler JL and Gladiator JT Rubicons. If your Rubicon is showing the persistent axle locker warning...- $96.33
- $96.33
- Unit price
- per
-
Vendor:Sunluway
Sunluway 6.6L Duramax Crankshaft Seal Driver Kit — Front & Rear Installer for 2001–2016 GM LB7 LLY LBZ LMM LML, Aluminum Alloy
Sunluway 6.6L Duramax Front & Rear Crank Seal Driver Kit installs new main crankshaft seals on 2001–2016 GM 6.6L Duramax engines cleanly and without damaging the seal. This two-piece installer set is built specifically for GM 6.6L Duramax diesel engines with RPO codes LB7,...- $99.90
- $99.90
- Unit price
- per
-
Vendor:Sunluway
Sunluway Harmonic Balancer Puller & Installer Kit — 1997+ GM LS/LT V8, 3-Jaw Clip-In & Thrust Bearing
Sunluway's GM 25264 harmonic balancer puller and LS installer set is a complete crank pulley removal and installation kit designed for 1997-up GM LS and LT V8 engines. This two-piece tool kit gives you a professional way to remove and install harmonic balancers and...- $101.57
- $101.57
- Unit price
- per
-
Vendor:Sunluway
Sunluway Spare Tire Mount 3001.0064 High-Mount Nickel-Plated Steel Bracket for 4.5-5" Bolt Patterns, 4/5/6-Lug
Sunluway's 3001.0064 spare tire mount is a heavy-duty, nickel-plated steel bracket that secures 4.5", 4.75" and 5" bolt-pattern wheels to trailer frames without drilling. This compact, high-mounted carrier is engineered to save space, resist corrosion, and accept 4-, 5- and 6-lug wheels on most...- $146.01
- $146.01
- Unit price
- per
-
Vendor:Sunluway
Sunluway Rear Crankshaft Seal Installer for 6.7L Power Stroke Ford Super Duty (2011–2021) — Carbon Steel, Black Finish
The Sunluway 303-1514 is a heavy‑duty rear crankshaft seal installer engineered to seat the 6.7L Power Stroke rear oil seal precisely for 2011–2021 Ford Super Duty and 2016–2021 F‑650/750 trucks. This installer tool is built to simplify rear crankshaft seal replacement on Ford 6.7L...- $173.53
- $173.53
- Unit price
- per
-
Vendor:Sunluway
Sunluway Front Crankshaft Seal & Wear Sleeve Installer for Cummins ISX12/ISX15 X15 — 4918991, Heat‑Treated Steel
The Sunluway 4918991 tool kit removes and installs front crankshaft seals and wear sleeves on Cummins ISX12, ISX15 and X15 single-overhead-cam engines without damaging the seal. This heavy-duty installer and remover set is built specifically to replace Cummins part number 4918991 and streamlines front...- $183.97
- $183.97
- Unit price
- per
-
Vendor:Sunluway
Sunluway RV Slide Out Motor & Gear Housing for BAL Accu-Slide R25075/R25076 — 12V 13-Tooth
The Sunluway 225008 RV Slide Out Motor & Gear Housing is a direct replacement assembly for BAL Accu-Slide cable-driven slide-out systems, combining a high-output 12V motor with a 13-tooth gearbox and mounting bracket for straightforward swap-in repairs. If your RV or trailer uses the...- $188.14
- $188.14
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.