Trailer Accessories

The LIMICAR LED Trailer Light Kit is a complete, submersible lighting system that provides tail, stop, turn, marker and an 11-LED third brake/ID bar with a heavy-duty 25ft protected wiring harness. Replace multiple mismatched lamps and fragile bare-wire kits with one purpose-built package sized...

LINKITOM Low Profile Submersible LED Trailer Light Kit is a complete, DOT‑compliant lighting package that delivers slim, fully sealed stop/turn/tail, side markers, license plate illumination and a third brake bar for boats and utility trailers. This all‑in‑one kit was designed for boat trailers and...

CURT 25100 is a heavy-duty straight-tongue trailer coupler that mounts to a 3-inch channel and secures to a standard 2-inch trailer ball with a 5,000 lb gross capacity. Built for trailer builders and owners who need a dependable, adjustable connection between tow vehicle and...

Compact dual-function 3/4" watermelon LED lights that switch from amber turn/marker lighting to blue auxiliary glow for versatile vehicle accent and safety lighting. These JZYZQBX 10-piece mini watermelon lights combine a low-profile 3/4-inch housing with high-brightness 6×3030 LED chips and a dual-revolution wiring design...

The Dazakoot 16" Double Tender Spring Kit is a two-piece suspension accessory that secures and protects trailer air and electrical lines by keeping them suspended and cushioned during operation. Designed for semi trucks and trailers, this 16-inch double tender spring kit prevents hoses and...

WahMOTOTin 6" smoked-lens oval halo LED tail lights are a sealed, submersible 2-piece brake/stop/turn/running light set with 52 red LEDs each, built for trailers, trucks, RVs and marine use. These compact 6-inch oval lamps combine a smoked outer lens with a bright red LED...

Racewill 4 Pack 1.98" Trailer Wheel Bearing Protectors are chromed stainless steel caps that seal hubs, monitor grease pressure, and prevent contamination for trailers, ATVs, RVs and boats. These bearing protectors fit hubs with a 1.98-inch bore and are designed to extend bearing life...

Deluwire 12FT 7-Way Straight Trailer Cord is a rugged, SAE-compliant 7-pin power cable designed to carry lighting, signal, and auxiliary circuits between a truck and trailer. This 12-foot, 7-way straight trailer cord from Deluwire combines heavy-gauge copper conductors, a zinc die-cast plug, and reinforced...

PlugSaf 12FT 7 Way Trailer Cord is a heavy-duty, weather-resistant 7-pin wiring harness built with premium copper gauges and a zinc die-cast plug for dependable trailer lighting and power connections. This 12-foot 7-way cable is engineered for semi trailers, tractors and heavy trucks that...

Lcrslitx Trailer Light Kit is a complete, IP67-rated submersible LED lighting system with a protected 25 ft wiring harness for boat, utility and cargo trailers. This all-in-one kit supplies reliable stop/tail/turn lights, marker lamps, a 13.7" ID light bar, license plate bracket and a...

VINAUO’s 4-in-1 LED Trailer Tail Light kit combines stop, brake, turn and tail functions with an integrated license plate light for brighter, weatherproof trailer illumination. This 2-pack LED tail light set from VINAUO replaces standard rectangular trailer lamps with energy-efficient LEDs, designed for 12V...

Partsam's submersible 12V LED trailer light kit is a complete lighting upgrade that includes square stop/turn/tail lamps, side fender markers, a 15" third brake ID light bar, a 25ft wiring harness and mounting hardware for trailers up to about 80" wide. This kit bundles...

The NBJINGYI 2-5/16" heavy-duty A-frame coupler is a 14,000 lb-rated, wedge-latch trailer coupler engineered for secure, low-play hitch connections on A-frame trailers and RVs. This reinforced Class IV coupler is built for trailers that demand higher gross combined weight capacity and a dependable connection...

These JZYZQBX 6-inch oval LED trailer lights are a six-piece set (four red tail/stop/turn lights and two white reverse lights) designed to deliver bright, reliable 12V signaling and running illumination for trailers and trucks. Built for straightforward flush-mount replacement or new installs, this kit...

JZYZQBX 6-inch oval LED trailer light kit provides six rugged, surface-mount LED lights for stop, turn, tail and reverse functions in one easy-to-install set. This complete 6-piece lighting set includes four red 6" oval stop/turn/tail lights and two white 6" oval reverse lights, all...

The Nilight Trailer Tail Light Kit is an all-in-one LED rear light assembly that delivers bright running, brake, turn signal, and reverse illumination with durable, weatherproof construction. This compact, multi-function trailer light replaces separate assemblies with a single sealed unit designed for heavy-duty use...

Nilight 4" Round Trailer Tail Light is a flush-mount red LED lamp that combines bright stop/turn/brake output with weatherproof durability for trailers, trucks, and specialty vehicles. Built for towing and work vehicles, this compact 4-inch lamp uses upgraded LEDs and a sealed housing to...

GREPSPUD 5x4.5 trailer hub kit is a complete replacement hub assembly for 3,500 lb trailers with 1-1/16" to 1-3/8" tapered spindles, supplied with bearings, seals, studs, lug nuts and extra dust caps for immediate installation. This kit supplies everything needed to refresh one wheel...

Stegewop's 2" adjustable channel-mount coupler is a Class IV hitch accessory rated to 8,000 lbs GTW that lets you fine-tune trailer height and lock to a standard 2" hitch ball securely. Built for utility trailers, car haulers, and mid-size campers, this channel-mount coupler combines...

EXERAUO 6" Submersible LED Boat Trailer Lights Kit is a waterproof, all-LED rectangle lighting set engineered for 12V trailers, delivering bright running, turn and brake signals plus license plate illumination. Keep your trailer visible and code-compliant with a ready-to-install light kit built for marine...

This set is a 6-piece kit of 6-inch oval LED trailer tail lights combining red brake/tail illumination and white reverse LEDs for durable, weatherproof trailer lighting. Replace or upgrade multiple trailers or trucks with this six-light bundle designed for 12V DC systems. Each oval...

The USSKYBOY 30035 58058 universal 5th wheel bracket kit is a 10-bolt above-bed mounting solution that supplies brackets, spacers and hardware to secure compatible industry-standard 5th wheel rails to full-size truck frames. This universal bracket kit is engineered for above-bed rail installations on full-size...

The VIAIR 7-Way Power Access adapter converts a vehicle's 7-way trailer plug into a protected 12V 2-pin SAE power outlet for compressors and accessories. Designed to deliver a safe, heavy-duty power source at the rear hitch, this compact adapter uses 12-gauge wiring and a...

Partswcgg 4" round LED trailer tail lights are compact, flange‑mount red stop/turn/tail lamps with 24 LEDs designed for reliable 12V vehicle signaling. These flange‑mounted LED assemblies combine a durable polycarbonate housing with a chrome bezel and energy‑efficient LED arrays to replace incandescent trailer lights....

The LIMICAR Trailer Lighting Kit is a complete 9-piece, DOT-compliant lighting system that includes 5-in-1 oval tail lights with built-in backup, a 13.7" center brake bar, side markers, heavy-duty brackets, and a verified 25FT 5-pin harness for ready-to-install trailer wiring. This all-in-one kit delivers...

FEELOTAM Wired Magnetic LED Trailer Light is a plug-and-play, 7-pin wired magnetic taillight kit built for reliable, instant trailer signaling without batteries or wireless lag. This compact, hard-wired magnetic light set combines full rear lighting functions with a heavy-duty magnetic mount and a long...

METOWARE's 2" A-frame trailer coupler secures a 2" hitch ball and is rated to tow up to 7,000 pounds with a sleeve-lock latch and powder-coat corrosion protection. This heavy-duty A-frame coupler is built for utility trailers, equipment haulers, and other 2" hitch setups where...

High-output LED cargo lights designed to replace the factory rear bed bulbs on 2019–2026 Dodge RAM 1500 models, delivering clearer, weatherproof illumination for your truck’s cargo area. These CZmenghe-compatible truck bed lights are a direct-fit LED replacement package engineered for Dodge RAM 1500 pickups...

SEHNSUCHT Trailer Idler Hub Kit is a 5-lug, 4.5" bolt-pattern wheel hub assembly designed for 3,500 lb trailer axles and tapered spindles from 1-1/16" to 1-3/8" — sold as a pair with bearings, seals, dust caps and hardware. This complete hub set supplies the...

These Tie Down black plastic trailer fenders are rugged, UV-stable polyethylene wheel covers sized for small trailer tires with a 5.19" overall diameter, sold as a two-piece set. Upgrade your small trailer with fenders engineered to protect wheels from road debris while resisting sun,...

GREPSPUD 5 on 4.5'' trailer hub kit is a complete, pre-lubricated 2000 lb hub assembly built to fit 1-1/16" straight spindles and 5x4.5" bolt patterns. This all-in-one GREPSPUD kit supplies two heavy-duty hubs plus bearings, seals, nuts, caps and hardware so you can replace...

inhtgeas Wireless Magnetic Trailer Lights are a rechargeable, magnet-mount towing lighting kit that delivers 2.4GHz bidirectional range, strobe and reverse functions, and weatherproof reliability for trailers, RVs and boats. If you tow a trailer, boat, camper or utility load and need dependable lighting without...

LAMPEASE Wireless Trailer Lights Magnetic is a rechargeable, plug-and-play LED lighting kit that gives trailers clear brake, turn and reverse signals without drilling or wiring. Designed for quick installs and temporary towing setups, this magnetic trailer light kit pairs strong magnets and a long-lasting...

Partsam 2.5" round amber marker lights are compact, DOT-approved LED side marker and clearance lamps built for easy flush mounting on trucks, trailers, RVs and other vehicles. These 10-pack LED marker lights replace older incandescent units with a low-profile, energy-efficient option that brings higher...

Partswcgg 6-inch oval LED trailer tail lights are a 10-piece set of sealed, flush-mount red stop/turn/tail lamps with 10 LEDs each, 3-prong plugs, rubber grommets, and IP65 splash resistance for 12V vehicles. These lights are built for trailers, trucks, and utility vehicles that need...

The Partswcgg 12V LED Utility Trailer Tail Light Wire Kit is a complete, submersible lighting package that upgrades rear, side and ID lights and includes a 25ft 4-flat wiring harness for trailers. This all-in-one kit combines square rear combination lights, mini oval side markers,...

YEOPGYEON’s 2-5/16 inch A-frame coupler is a weld-on, Class 4 trailer hitch rated for 12,500 lbs gross trailer weight, built for permanent, heavy-duty towing applications. This heavy-duty A-frame coupler is engineered for demanding towing tasks where strength, stability, and long-term corrosion resistance matter. Constructed...

Complete 4-set hub bearing kit for 7000 lb trailer axles with D42 spindles—everything needed to rebuild or refresh four wheel hubs. These RALZAOTO kits bundle matched bearing cones and races, double-lip grease seals, cotter pins and tang washers to service up to four trailer...

The FEXON 23337305 Trailer Brake Control Module (TBCM) is a direct-fit replacement for GM part numbers 23114650 and 23104453 designed to restore proper trailer brake communication and function. If your GM truck or SUV is showing trailer brake errors, reduced trailer braking performance, or...

AIUWIZO 2 Sets 3500 lb 5-lug idler hub kit provides two complete, 5-on-4.5" non-brake hubs made for 3,500 lb trailer axles, including bearings, seals, lug nuts and dust caps. These replacement idler hubs are built for common 3,500 lb utility, boat and cargo trailer...

METOWARE's 2" channel-mount adjustable trailer coupler secures a standard 2-inch trailer ball and supports up to 7,000 pounds with a sleeve-lock latch and corrosion-resistant finish. Designed for heavy-duty towing, this coupler mounts on a vertical channel and slides up or down to align your...

Dazakoot 12FT 7-way coiled electrical power cord is a heavy-duty trailer cable designed to reliably connect tractors and semi-trailers for lights, brakes and auxiliary power. This coiled 12-foot cable delivers a compact, stretchable connection between a towing vehicle and its trailer while meeting SAE...

OZISENS 7000lb 25580 14125A Trailer Axle Hub Bearing Kit is a complete four-set bearings and seals kit engineered to fit D42 tapered spindles on 7000 lb trailer axles. This comprehensive kit supplies everything needed to rebuild or service four trailer hubs that use 25580/25520...

The CURT 56291 OE custom vehicle-to-trailer connector is a plug-and-play 4-way flat T-connector engineered to provide a clean, OEM-compatible trailer wiring connection for select Honda Pilot and Passport models. If you tow occasionally or frequently, a reliable wiring interface makes hooking up trailers faster...

These are six amber "watermelon" style LED side marker lights from Suacopzar that offer dual-mode operation (steady or strobe) and a rugged build for 12V–24V trucks, trailers and heavy equipment. If you want a vintage domed-lens look with modern LED brightness and reliable outdoor...

These BJZ L-shaped 304 stainless steel brackets secure watermelon-style LED lights to cars, trucks, RVs and off-road vehicles with durable corrosion resistance and included mounting hardware. Built for vehicle customizers and installers, this six-piece bracket kit provides a reliable mounting solution for watermelon LED...

Partswcgg 4" Round LED Trailer Tail Lights are a waterproof, flush-mount 12V lighting kit with 24 LEDs per lamp, designed for stop/turn/tail and reverse functions on trailers and light trucks. These 4-inch round LED lights come as a complete set with grommets and standard...

The CURT 52210 Breakaway System for RVibrake is a universal emergency activation kit that automatically engages your RVibrake if a tow hitch separates, helping stop a towed vehicle safely. When towing a car behind an RV, a reliable breakaway system is an essential safety...

Partsam 4" round 24-LED trailer tail lights deliver stop, turn and tail functions in a sealed, weatherproof 12V kit ready for flush or grommet mounting. If you need a reliable set of trailer lights that combines visibility, durability and straightforward installation, this 12-piece Partsam...

Jamarco’s 12-piece set of 4-inch round red LED trailer tail lights delivers sealed, low-draw illumination for stop, turn and tail functions on 12V vehicles. These compact, flush-mount tail lights are built for trailers, trucks, UTVs and utility equipment where a bright, reliable rear lighting...