Fill-Rite 10-Micron Particulate Filter Kit 18 GPM (1200KTF7018) — 3/4" NPT, Complete Head & Fittings

The Fill-Rite 1200KTF7018 is a complete 10-micron particulate filter kit that protects fuel systems up to 25 GPM by removing dirt, rust and other harmful particles.

This kit brings together a high-efficiency 10-micron filter element and a purpose-built filter head plus fittings for a straightforward installation on transfer pumps and piping. Built with 3/4" NPT threaded ports and rugged components, the assembly is engineered for heavy use across gasoline, diesel, kerosene and biodiesel blends. Use it to reduce contamination-related wear and keep fuel delivery consistent on farms, fleets, job sites and commercial fueling stations.

How does this filter kit improve fuel system reliability?

The 10-micron particulate element screens out fine solids that can accelerate wear in pumps, lines and injectors. By intercepting dirt and rust before they circulate, the filter minimizes downtime and helps maintain designed flow rates under load.

• 10-micron media captures sub-visible particulates that cause abrasion.
• Compatible with systems up to 25 GPM to maintain throughput.
• Steel-standard 3/4" NPT ports for secure, leak-resistant connections.
• Complete kit reduces fitting mismatch and simplifies installation.

What components are included and why do they matter?

This kit arrives ready to install: the F1810PM0 10-micron filter element, the 1200KTG9075 filter head, a 3/4" elbow and two nipples (7.25" and 2.5"). Each part is selected to produce a compact, serviceable filter assembly that threads into common transfer plumbing.

• F1810PM0 filter element—primary contaminant capture.
• 1200KTG9075 filter head—secure mount with 3/4" NPT ports.
• 3/4" elbow—simplifies alignment in tight piping runs.
• 3/4" x 7.25" and 3/4" x 2.5" nipples—for proper spacing and fit.

How often should I replace the filter element and maintain the kit?

Replace the particulate element roughly every six months or after about 10,000 gallons of fuel throughput, whichever comes first. Inspect seals and threaded joints during each replacement and tighten or reseal as needed to prevent leaks.

• Recommended change interval: ~6 months or 10,000 gallons.
• Check for leaks at all 3/4" NPT connections during service.
• Keep a spare F1810PM0 element on hand for uninterrupted operation.

Will this kit work with my fuel type and pump capacity?

The 1200KTF7018 is suitable for gasoline, diesel, kerosene and many biodiesel blends, and it’s engineered for transfer systems up to 25 gallons per minute. Confirm your pump’s maximum flow and the chemical compatibility of specialty fuels before installation for optimal performance.

• Compatible fuels: gasoline, diesel, kerosene, select biodiesel blends.
• Designed flow rating: up to 25 GPM for transfer applications.
• Heavy-duty construction handles demanding, high-use environments.

Who is this for: The Fill-Rite 1200KTF7018 kit is aimed at operators who need dependable filtration on fuel transfer setups—farmers, equipment fleets, construction contractors, fueling station managers and industrial facilities. If you rely on clean, consistent fuel delivery to prevent component wear and avoid costly downtime, this all-in-one kit offers a durable, serviceable solution with straightforward installation and predictable maintenance intervals. Made in the USA and built to integrate with common transfer plumbing, it’s a practical upgrade for any fuel system rated at or below 25 GPM.