Exhaust & Emissions Parts

This 1-pack RV generator exhaust hanger (tailpipe bracket) replaces Onan Cummins 155-2174 and secures 1.25–1.75" generator tailpipes with a 6½" flexible clamp for reduced vibration and easier installation. Engineered as a direct-fit replacement for worn or damaged muffler hangers, this tailpipe bracket restores stable...

The LWNWPPER 2.5 inch V-Band Clamp kit is a stainless-steel exhaust coupling that includes a 2.5" male flange, a 2.5" female flange, and a V-band clamp to create a sealed, removable join for 2.5" OD pipes. This kit is built from 304 stainless steel...

SeSicWe's muffler hanger is a heavy-duty iron exhaust support designed to replace part numbers 1552174 and 155-2174 for Onan generators and select RV models. If your generator or RV exhaust is sagging, noisy, or showing stress where it mounts, this purpose-built hanger restores proper...

MOTOQUEEN's 3" stainless exhaust tacking band is a clamp-on tool that holds exhaust pieces securely during welding to create precise, corrosion-resistant seams. Built from durable stainless steel and sized for a 3-inch (76.1mm) pipe, this tacking band slips on, clamps, and stabilizes exhaust components...

LWNWPPER 2.5 inch Exhaust Clamps are stainless-steel muffler bands designed to join and seal 2.5" (63mm) straight exhaust pipes reliably without deformation. These two 2.5" muffler clamps from LWNWPPER are made from 304 stainless steel and use a 360-degree winding strap to deliver an...

These two joytrace swivel exhaust hangers provide adjustable, corrosion-resistant mounts that support mufflers and pipes while reducing vibration and preventing sagging. When exhaust hangers wear out, mufflers can sag, rub against the chassis, or transfer noise into the cabin. The joytrace 2-Pack Swivel Exhaust...

eLifecenter 2.5" lap joint exhaust band clamp is a stainless-steel, no-weld clamp designed to join 2.5" OD exhaust pipes and mufflers with a corrosion-resistant, gas-tight seal. This 2-1/2" lap joint exhaust band clamp from eLifecenter combines a formed inner sleeve, high-grade T304 stainless band,...

EVIL ENERGY 3.0" lap joint exhaust clamp joins a 3.0" OD pipe to a 3.0" ID pipe using a 304 stainless steel band and a no-weld, 360° sealing design. This single-piece exhaust band clamp from EVIL ENERGY is engineered for connecting pipes, mufflers and...

LEDAUT Titanium exhaust heat shield is a 2" x 16' fiberglass wrap treated as a titanium-colored thermal barrier and supplied with stainless steel locking ties to reduce under-hood heat and protect pipes from radiant and contact temperatures. This heat-wrap roll is a heavy-duty thermal...

NEZUIBAN Exhaust Wrap 2" x 50FT is a high-temperature fiberglass header wrap designed to cut radiant heat, protect nearby components, and provide long coverage with included stainless-steel locking ties. When building or maintaining performance exhausts, turbo plumbing, or motorcycle headers, managing heat is essential...

SunplusTrade 2" x 50' black exhaust heat wrap is a heavy-duty fiberglass tape roll with six 12" stainless steel locking ties designed to insulate headers and reduce under-hood heat on cars and motorcycles. This heat-wrap roll combines high-temperature fiberglass construction with stainless steel locking...

KDFUHRUI 6036734AA 6036684A exhaust manifold flange bolts and U-nuts kit is a ready-to-install replacement set designed to secure exhaust manifolds, Y-pipes and converters on compatible Dodge, Jeep and Ram trucks. If your vehicle’s exhaust flange hardware is corroded, loose or missing, this kit supplies...

DEGEOBERLIN Titanium adhesive-backed heat shield (12" x 24") is a high-temperature thermal barrier mat engineered to block radiant heat up to 2500°F and simplify installation behind grills, exhausts, and hot surfaces. This adhesive-backed thermal blanket combines basalt-based layers and a titanium-like outer surface to...

Yinlowa 25860-62010 is a direct-replacement vacuum switching valve (VSV) engineered to match Toyota and Lexus OE 25860-62010 function, connector and two-port vacuum layout. This replacement VSV solenoid restores controlled vacuum routing in emissions and intake systems on confirmed Toyota and Lexus models. Built to...

TVM TRAVERMAN EVAP vapor canister purge valve solenoid 911-222 controls fuel vapor flow from the charcoal canister to the engine to restore correct EVAP operation. This replacement purge valve is an aftermarket part engineered to match original equipment fit and function for many Ford,...

Zreneyfex intake manifold vacuum runner solenoid valve is a direct-fit replacement part (4M5G-9A500 / K5T46597 / K5T81777) designed to restore proper vacuum control in compatible Mazda engines. This replacement solenoid valve from Zreneyfex replaces OE numbers 4M5G-9A500, K5T46597, and K5T81777 and is made to...

Dianrui 2PCS 1.75" butt joint stainless steel clamp bands are heavy-duty 360° exhaust clamps made to join 1.75-inch outer-diameter pipes and minimize leaks and pipe deformation. If you need a compact, reliable clamp to join or repair sections of an exhaust system, these two...

Dianrui 2" Butt Joint Stainless Steel Clamp Band (2-pack) is a reusable, corrosion-resistant exhaust clamp designed to create an even 360° seal on 2.0" (50 mm) outer-diameter pipes and mufflers. These two stainless-steel clamp bands are engineered for joining 2.0" exhaust sections without welding....

Dreamseek’s stainless-steel exhaust heat shield is a universal, curved middle-pipe protector that reduces surface heat, shields exposed exhaust sections, and adds a carbon-fiber style finish to most motorcycles. Whether you ride a cruiser, sportbike, or standard, exposed mid-pipe sections can become uncomfortably hot and...

NewYall EVAP purge control valve solenoid precisely meters fuel-vapor flow for compatible Acura, Honda and Saturn models as a direct-fit replacement. This NewYall EVAP evaporative emission purge control valve solenoid replaces worn or faulty OEM parts to restore proper vapor management in the EVAP...

SFY vapor canister purge solenoid valve 55573017 is a direct-fit replacement EVAP purge control valve engineered to restore proper venting and control of fuel vapor for select 1.4L turbocharged Chevy and Buick vehicles. When the EVAP purge solenoid fails, drivers may notice check-engine lights...

FLASLD Starter Heat Shield Barrier Cover is a 7" x 24" self-attaching aluminum-and-fiberglass wrap designed to protect starters and nearby components from intense under-hood heat. If your starter, solenoid or nearby electronics sit close to headers or exhaust, radiant and direct heat can shorten...

eLifecenter ID 2" Lap Joint Exhaust Band Clamp is a 304 stainless steel slip-fit clamp that joins 2" OD exhaust pipe ends with a gas-tight seal and no welding required. This lap joint band clamp is built for exhaust systems that need a reliable,...

EVIL ENERGY 2.75-inch exhaust clamp is a stainless-steel lap joint band clamp engineered to join two 2.75" (2 3/4") OD exhaust components quickly and without welding. This heavy-duty butt joint band clamp offers a simple, mechanical connection for pipes, mufflers and catalytic converters. Crafted...

EVIL ENERGY's 3.0-inch stainless steel exhaust clamp is a single-piece lap joint band designed to join two 3.0" OD pipes—offering a bolts-on, no-weld seal for mufflers, catalytic converters and exhaust tubing. When you need a straightforward way to connect same-diameter exhaust components, this 3.0"...

EVIL ENERGY’s 1.75-inch stainless steel lap-joint exhaust clamp secures two 1.75" OD pipes together with a 360° sealing band, no welding required. This heavy-duty butt joint band clamp is engineered to join 1.75" outside-diameter exhaust pipes, mufflers, or catalytic converter ends with a straightforward,...

QWORK 2.5" zinc-plated carbon steel U-bolt clamp (4 pack) secures 2.5" outer-diameter pipes for exhaust, muffler and general metal pipe joins without welding. This U-bolt clamp set from QWORK is built to fasten 2.5" outer-diameter round pipes with a straightforward, removable clamping method. Each...

Ucreative 2" x 50' Titanium Exhaust Heat Wrap is a single-roll, high-temperature header wrap designed to contain and deflect extreme heat from exhaust pipes, headers and turbo plumbing while resisting color fade. This 2-inch by 50-foot roll of titanium-colored exhaust wrap from Ucreative provides...

SSNNUU 2PCS Stainless Steel Lap Joint Band Clamps are universal 3.0-inch pipe repair clamps designed to create a secure, leak-resistant connection for exhausts, mufflers and general piping. These two-piece lap joint band clamps provide a straightforward, adjustable solution for joining or repairing circular pipes...

eLifecenter 3" Exhaust Band Clamps are heavy-duty T304 stainless steel lap-joint clamps designed to seal and secure 3" OD to 3" ID exhaust connections without welding. These two-pack lap joint clamps provide a bolt-on solution for joining like-sized exhaust sections, mufflers, and pipe adapters....

Elifecenter 2" Exhaust Band Clamps are heavy-duty T304 stainless lap-joint clamps designed to securely join 2" OD pipe to 2" ID pipe without welding. These two-piece 2" lap joint exhaust clamps provide a bolt-on alternative to welded or sleeve connections for mufflers, tailpipes and...

SKYMIRO 3 Inch Exhaust Clamp is a 304 stainless steel lap-joint band clamp engineered to join a 3" outer-diameter pipe to a 3" inner-diameter pipe for leak-resistant exhaust, muffler, elbow, and catalytic converter connections. Whether you’re repairing an exhaust leak, installing a custom performance...

ROADFORMER’s 3.5-inch 304 stainless steel lap-joint exhaust band clamp is a one-pack solution that joins a 3.5" OD pipe into a 3.5" ID pipe with a 360° leak-resistant seal without welding. Whether you are repairing a muffler, connecting a turbo downpipe, or assembling a...

ROADFORMER's 5-inch 304 stainless steel lap-joint band clamp securely joins a 5" OD pipe into a 5" ID pipe for leak-resistant, removable exhaust connections without welding. This single-pack lap-joint exhaust band clamp is built from corrosion-resistant 304 stainless steel and sized specifically to connect...

JOUGU Exhaust Heat Wrap Roll is a 2" x 50' black fiberglass tape kit designed to insulate headers and exhaust pipes, lower under-hood temperatures, and include stainless locking ties plus installation tools. This heat shield tape kit delivers a practical way to manage heat...

DecoHongDi 2.5-inch lap joint exhaust clamps are a two-pack of 304 stainless steel band clamps designed to join 2.5" OD pipe to 2.5" ID pipe for durable, leak-resistant exhaust and pipe repairs. These clamps provide a compact, high-strength solution when you need to secure...

SUISFLXGRO Exhaust Flex Pipe is a universal, weld-on stainless steel flex section designed to absorb vibration, reduce exhaust stress, and extend system life for cars and heavy-duty vehicles. This flexible exhaust connector is built from 100% SS201 stainless steel and uses a double-braided, 2-ply...

Datanly 4-pack 2.5" heavy-duty U-bolt exhaust clamps are saddle-style muffler connectors made from galvanized iron to join or repair 2.5-inch outer-diameter exhaust pipes without welding. If you need a durable, quick way to join exhaust sections, secure a tip, or stop leaks, these clamps...

Elifecenter Heavy Duty 3 Inch Exhaust U Bolt Clamp is a corrosion-resistant, T201 stainless steel two-piece clamp designed to securely join or repair 3" OD exhaust pipes without welding. Built for mechanics, hobbyists, and vehicle owners who need a fast, reliable pipe connection, this...

Lonsda Universal Exhaust Hanger Rods are heavy-duty 3/8" stainless steel weld-on hangers with rubber bushings, sold as a 2-pack and designed to secure and quiet automotive exhaust systems. These weld-on exhaust hanger rods from Lonsda offer a robust, corrosion-resistant mounting solution for mufflers, catalytic...

The Dorman 03413B Exhaust Manifold Hardware Kit provides a complete set of OE-style fasteners to secure your exhaust manifold with durable, corrosion-resistant components. If the studs, nuts or bolts that hold your exhaust manifold have corroded, broken, or gone missing, this Dorman kit supplies...

ZBN 28910-26900 (911-808) is a direct-fit canister purge valve designed to replace the factory unit on select Hyundai and Kia models, restoring proper EVAP system function without programming. This replacement canister purge valve from ZBN is engineered to meet OEM fit and performance standards...

HY-SPEED Evaporative Emissions Vapor Canister Vent Valve (purge solenoid) is a direct-fit aftermarket replacement for select Nissan and Infiniti models that restores correct EVAP venting and meets supplier-quality standards similar to the original equipment. This replacement vent valve (purge solenoid) from HY-SPEED is a...

AMIZUHE Fiberglass Repair Kit is a water-activated, resin-impregnated fiberglass wrap designed to form a hard, durable repair over damaged exhaust pipes, hoses, and other surfaces. This kit contains one 4" wide by 15 ft roll of fiberglass cloth pre-impregnated with a polyurethane resin that...

SWI Universal Starter Heat Shield Wrap is a self-attaching aluminum and fiberglass wrap (7 x 24 in) that reflects radiant heat to protect starters and solenoids. If your vehicle or race machine faces high under-hood temperatures, this reflective starter wrap is built to reduce...

The MOTOKU EGR vacuum solenoid valve and pressure feedback sensor kit is a direct-fit replacement set designed to restore proper EGR control on many Ford, Mercury and Lincoln models from the mid‑1990s through the 2000s. If your vehicle is showing symptoms related to the...

The Fluval A20219 FX5/FX6 Purge Valve is a genuine replacement purge assembly designed to restore easy priming and air evacuation for Fluval FX5 and FX6 canister filters. When an FX-series canister develops trapped air or loses its quick-prime capability, the purge valve is often...

carleef 78.7" 1"-ID diesel heater exhaust pipe kit is a flexible, rust-resistant stainless steel exhaust hose with an aluminum muffler designed to reduce noise and fit tight vehicle installations. This complete exhaust kit is built for diesel heaters and small generators where space is...

NewYall EVAP Vapor Canister Purge Solenoid Valve CP415 is a direct-replacement purge valve compatible with OE references including 4669475AB, designed to restore proper EVAP system control on many Dodge, Jeep, Chrysler and Plymouth models. This NewYall CP415 purge solenoid valve replaces worn or faulty...

The Ricmjend 12630282 vapor canister purge solenoid valve is a direct-fit replacement EVAP purge valve engineered to restore proper fuel-vapor routing and fit specified GM vehicles from 2014–2022. This replacement purge solenoid is manufactured to match original equipment dimensions and function, offering a corrosion-resistant...