Exhaust & Emissions Parts

Floshine 2PCS 1.5" lap joint band clamps are preformed stainless-steel exhaust clamps designed to join a 1.5" OD pipe to a 1.5" ID pipe without welding, providing a 360° sealed connection for mufflers, pipes, and catalytic components. These clamps use a stepped-diameter lap joint...

Creative.C SBC Header Gaskets are copper oval-port exhaust manifold gaskets engineered to fit Chevy small block V8 engines and provide a reusable, high-temperature seal without additional sealants. These Creative.C copper header gaskets are built for classic Chevy small block engines including 262, 283, 305,...

GaeaAuto 2.5 inch V-Band Clamp is a pair of 304 stainless-steel t-bolt clamps designed to join 2.5" ID v-band flanges (3 1/8" flange OD) for turbo downpipes, intercooler and intake pipe connections. This set of two V-band clamps combines corrosion resistance, high-temperature durability and...

AggSound Exhaust Heat Shield is a pair of 0.5mm embossed aluminum panels (16" x 13") designed to reflect radiant exhaust heat away from wiring, fuel lines, and vehicle components. This two-pack of formable aluminum heat shields from AggSound offers a lightweight, trim-to-fit solution for...

ZEHCLP 2.5-inch exhaust band clamp sleeve is a bolt-on 304 stainless steel coupler that joins 2.5" OD pipes for catalytic converters, mufflers, and exhaust repairs without welding. If you need a reliable, maintenance-friendly way to connect or repair sections of an exhaust system, this...

The Dorman 03411B Exhaust Manifold Hardware Kit is a complete, OE-style set of fasteners designed to securely attach the exhaust manifold to compatible engines. This kit supplies the exact hardware needed when original bolts, studs, nuts or washers are missing, damaged, or seized. Manufactured...

The LWNWPPER 3-inch V-Band Clamp kit joins 3" OD pipes with a durable 304 stainless steel clamp plus matching male and female flanges for secure, vibration-resistant exhaust and duct connections. This single-piece kit provides the clamp and both flanges needed to join two 3"...

eLifecenter's Universal T304 Stainless ID 4" to OD 5" Exhaust Adapter Reducer is a one-piece, 16-gauge T304 stainless coupler that joins a 4-inch inner-diameter pipe to a 5-inch outer-diameter pipe with a 6" overall length. This precision-formed exhaust adapter is made from T304 nonmagnetic...

TuhooMall's 2" x 50' titanium exhaust heat wrap kit is a high-density fiberglass wrap with stainless-steel locking ties and clamps designed to reduce under-hood heat and insulate exhaust headers, turbo manifolds, and downpipes. This complete kit combines a 2" wide, 50' long titanium-colored fiberglass...

These eLifecenter 4" lap joint exhaust band clamps are heavy-duty T304 stainless steel connectors designed to join 4" OD to 4" ID exhaust pipes without welding. Built for mechanics, fabricators, and vehicle owners who need a reliable, no-weld connection, these clamps use a lap-joint...

eLifecenter's Heavy Duty 4" Exhaust U-Bolt Clamp is a reusable, corrosion-resistant stainless steel clamp built to secure 4-inch OD exhaust pipe connections without welding. When you need a fast, durable way to join or repair exhaust tubing, this 4-inch u-bolt clamp from eLifecenter provides...

SKYMIRO's 3-inch exhaust clamp is a double-layer 304 stainless steel butt-joint sleeve designed to join two 3" OD exhaust pipes securely without welding. This 1-piece clamp sleeve from SKYMIRO is built for end-to-end connections on mufflers, catalytic converters, elbows and straight exhaust tubing where...

UNLRAE Flex Pipe is a stainless-steel, double-braided flexible exhaust connector designed to absorb vibration and restore flexibility to automotive exhaust systems. This heavy-duty exhaust flex pipe is built from corrosion-resistant stainless steel with a double-layer braided construction that stands up to heat, road salt,...

UNLRAE Flex Pipe is a heavy-duty stainless steel flexible exhaust connector that reduces vibration and isolates engine movement between the manifold and muffler. This durable exhaust flex pipe from UNLRAE is built to withstand heat, road salt and repeated motion while restoring flexibility to...

Design Engineering Heat Sheath™ aluminized sleeving is a slip-on, heavy-duty thermal shield that reflects intense radiant heat and defends hoses, wires, and fluid lines from abrasion and contaminants. Built from 19 oz high-temperature fiberglass insulation laminated to an aluminized outer layer and stitched with...

Design Engineering Heat Sheath Aluminized Sleeving is a slip-on thermal and abrasion barrier that reflects intense radiant heat and shields hoses, cables, and fluid lines from heat, oils, and road debris. Built for automotive and industrial environments, this 1" I.D. x 3 ft sleeving...

Design Engineering Heat Sheath is a 1/2" I.D. x 3 ft aluminized fiberglass sleeving that reflects radiant heat up to 2000°F and provides heavy-duty abrasion and chemical protection for hoses, wires and fluid lines. If you run wiring, fuel lines, brake hoses or other...

A ABIGAIL 2.5" stainless steel butt joint band clamp securely joins two 2.5" OD exhaust pipes without welding, supplied as a 2-piece repair kit. This paired exhaust coupler by A ABIGAIL is built for reliable pipe-to-pipe connections on mufflers, catalytic converters and exhaust sections...

A ABIGAIL 2.75" stainless steel butt joint band clamp is a reusable two-piece exhaust coupler designed to join 2.75" OD pipes, mufflers, or catalytic converters without welding. Whether you are repairing a leaky exhaust joint or building a custom system, this 2.75" butt joint...

A ABIGAIL 2.25" stainless-steel butt joint band clamp sleeve securely joins 2.25" exhaust pipes, mufflers or catalytic converters without welding. This two-pack of 2.25" butt joint band clamps from A ABIGAIL is a reusable, bolt-on solution engineered to seal and hold exhaust components together....

This A ABIGAIL 3-inch stainless steel butt joint band clamp is a two-piece, reusable exhaust coupler engineered to securely join 3" OD exhaust pipes, mufflers, and converters without welding. Built from 304 stainless steel with a zinc-plated M10 flange bolt, steel gasket and aluminum...

A ABIGAIL 2.0" stainless-steel butt-joint exhaust clamp sleeve couples two 2.0" OD pipes securely without welding, sold as a 2-piece kit. This two-pack of 2.0-inch butt joint band clamps from A ABIGAIL is engineered to join exhaust pipes, mufflers, and catalytic converters quickly and...

HiBuyer’s 1.5-inch T304 stainless steel 18-inch straight exhaust tube is a universal, corrosion-resistant extension designed to join, extend, or replace a vehicle’s exhaust run with a precision-fit, durable 1.5" ID-to-OD tailpipe. This straight exhaust extension is crafted from T304 stainless steel for long-term resistance...

EVIL ENERGY's 3.0-inch narrow band exhaust clamp is a two-piece stainless steel kit engineered to join 3.0" slip-fit pipes, mufflers, and catalytic converters without welding. This clamp set provides a removable, corrosion-resistant connection for exhaust components where space is limited. Each clamp uses a...

EVIL ENERGY's 2.5-inch narrow band exhaust clamp is a two-piece, 304 stainless-steel clamp built to join 2.5" slip-fit pipes, mufflers, and catalytic converters without welding. This clamp provides a simple, removable connection for exhaust components where a compact band and reliable sealing are required....

The VehiMata 2.0 Exhaust Clamp is a two-piece 2" butt-joint sleeve coupler designed to securely join 2.0" OD exhaust pipes without welding. Built for simple, reliable repairs and installations, this two-pack of stainless-steel band clamps gives you a quick way to connect mufflers, pipes,...

EVIL ENERGY 2" muffler U-bolt clamps are a two-piece stainless steel saddle-style kit engineered to join 2" outer-diameter exhaust pipes securely without welding. This clamp set is designed for connecting muffler inlets, outlets, elbows and coupling pipes where one section measures 2 inches OD...

A 9-piece replacement kit of M8x1.25x40 304 stainless steel exhaust manifold studs and nuts designed to fit Honda and Acura B- and D-series engines. These AUTOVIC studs replace worn or damaged manifold hardware on B18, B20, D15, D16 and other B-/D-series engines used across...

Bielpord’s 2.5-inch 45° adjustable SS304 stainless steel exhaust elbow is a universal, weldable pipe bend designed for custom and modified car exhaust systems. This adjustable 45° bend is built from corrosion-resistant SS304 stainless steel and sized to suit most aftermarket exhaust layouts. It’s intended...

SUISFLXGRO Exhaust Flex Pipe is a universal stainless-steel flex connector designed to isolate vibration and manage exhaust movement for cars and light heavy-duty vehicles. This flexible exhaust section offers a straightforward clamp-on solution for repairing or extending exhaust systems without welding. Built from SS201...

EVIL ENERGY's 3.0" V-Band Quick Release Clamp kit is a stainless-steel, quick-disconnect V-band system with male/female mild-steel flanges designed for 3" OD pipes and repeated assembly. If you work on turbochargers, downpipes, intercoolers or custom exhaust assemblies, a reliable V-band connection speeds service and...

Sorello 2 PCS MLS exhaust header manifold gasket kit (OE 12617944) includes two multi-layer steel gaskets and twelve bolts for a leak-resistant engine exhaust seal. This replacement kit is engineered to match original equipment specifications and fits a wide range of GM vehicles, including...

COLOR TREE 78.7-inch stainless steel exhaust pipe is a universal 1-inch ID vent hose designed to replace or upgrade diesel and gas parking heater exhausts in cars and trucks. This exhaust pipe is crafted to work with common parking heater models (including Eberspacher and...

WNOOENG 212cc exhaust pipe header kit is a direct-fit replacement exhaust designed to boost sound and exhaust flow on non-hemi 196–212cc small OHV engines used in Coleman CT200u, Baja Warrior, Predator and GX series mini bikes and go-karts. This header kit swaps in for...

VPZMT 1.75" stainless steel muffler exhaust clamp is a heavy-duty band clamp engineered to secure 1.75" I.D. muffler inlets on Harley Touring bikes like Street Glide, Electra Glide, Road King and Road Glide. These exhaust clamps are built from 304 stainless steel to resist...

The RLP Vapor Canister Purge Valve Solenoid controls the release of stored fuel vapors into the intake, restoring correct EVAP operation when replacing a faulty purge valve. When the EVAP system can't vent or purge properly, vehicles often show poor idle, trouble starting after...

This A ABIGAIL vapor canister purge valve is a direct-fit replacement EVAP solenoid designed to restore proper fuel-vapor control on many Chevy, GMC, Buick, Cadillac, Pontiac and Isuzu models. When the EVAP system signals trouble—loose fill cap codes, poor idling after refueling or check-engine...

Alioncar titanium-style wire heat shield sleeve is a flexible basalt-based wrap designed to protect spark plug wires, fuel lines, brake hoses and cable looms from extreme radiant heat up to intermittent 2500°F. This automotive heat shield sleeve is a lightweight, expandable woven wrap that...

TuhooMall Automotive Exhaust Header Wrap Kit is a 2 in × 50 ft high-density black fiberglass wrap with stainless ties and clamps designed to manage radiant heat around headers, manifolds, turbos, and downpipes. This kit provides a practical way to reduce under-hood radiant heat...

JDMSPEED's 3" stainless steel V-band flange and clamp kit is a universal, heavy-duty replacement set designed to join turbo downpipes and exhaust components with a quick-release connection. This compact kit equips tuners and racers with a straightforward coupling solution: one 3-inch inner diameter clamp...

Livoccur's 4.0" ID to 5.0" OD stainless steel exhaust adapter is a corrosion-resistant pipe connector designed to join a 4.0-inch outer-diameter pipe to a 5.0-inch inner-diameter pipe for a secure, low-profile exhaust transition. This precision-formed exhaust coupler from Livoccur offers a simple way to...

The Peastorm 2.75 to 3 Inch Exhaust Adapter is a clamp-on reducer pipe that joins 2.75" and 3" exhaust tubing quickly without welding. This compact adapter is engineered to join outer-diameter exhaust pipes measuring 2.75 inches and 3.00 inches using a dual-ended clamp design...

Peastorm's 3 to 3.5 Inch Exhaust Adapter is a clamp-on reducer that connects 3.0" OD and 3.5" OD exhaust pipes quickly and securely without welding. This precision-formed reducer is built from 409L mild steel to resist corrosion and stand up to the heat and...

ETL INDUSTRIES 4-inch narrow-band exhaust clamp is a 2-piece, T-304 stainless steel solution built to join 4" OD to ID slip-fit exhaust pipe securely without welding. Designed for automotive and light-fabrication use, this pair of exhaust clamps delivers corrosion resistance, high clamping force and...

ROADFORMER 2 inch Narrow Band Stainless Steel Exhaust Clamp (2-pack) is a no-weld, high-strength clamp engineered to join 2" OD into 2" ID exhaust slip-fit connections for reliable sealing and long service life. Whether you're repairing a muffler inlet, connecting an elbow, or finishing...

ROADFORMER 1.75 inch Exhaust Clamp Narrow Band (2 Pack) is a stainless-steel, no-weld repair clamp engineered to join 1.75" OD to 1.75" ID exhaust connections with a compact, corrosion-resistant seal. If you need a fast, reliable way to repair or assemble small-diameter exhaust runs,...

UNLRAE Flex Pipe is a heavy-duty stainless steel exhaust flex connector that absorbs vibration, reduces noise, and lets you repair or modify automotive exhaust runs without replacing the whole system. Built from braided, corrosion-resistant stainless steel, this universal muffler tube fits between the manifold...

SKYMIRO 4" exhaust clamp is a stainless steel lap-joint band clamp engineered to join a 4.00" outer-diameter pipe to a 4.00" inner-diameter pipe for a secure, leak-reducing exhaust connection. This two-piece clamp set is built from 304 stainless steel with zinc-plated fasteners and a...

SKYMIRO 2.5 Inch Exhaust Clamp is a heavy-duty 304 stainless steel lap joint band clamp designed to join a 2.5" OD pipe to a 2.5" ID pipe with a 360° I-block seal for leak-resistant exhaust connections. This pair of SKYMIRO exhaust band clamps provides...

ARTR 2" x 50' Titanium Exhaust Header Heat Wrap is a high-temperature, universal header wrap designed to insulate exhaust headers and reduce under-hood heat while improving flow and component longevity. This single roll of titanium exhaust header wrap from ARTR is a 2-inch wide,...