Exhaust & Emissions Parts

PALOZO Exhaust Hangers are heavy-duty muffler brackets designed to secure RV generator tailpipes quickly and resist corrosion for long-term use. When a generator's exhaust needs a reliable mount, this pair of PALOZO muffler hangers gives you a straightforward, durable solution. Built from coated steel...

winterrock Dual Exhaust Tip is a universal, bolt-on stainless steel muffler tip that adds a dual-outlet look, deeper exhaust tone, and durable protection without welding or permanent modification. This dual outlet tailpipe from winterrock combines high-grade stainless steel construction with a curved, rolled-edge design...

DNA MOToring FXP-CCOB05 is a direct-fit T-304 stainless steel flex pipe connector designed to replace damaged catalytic converter flex sections on 1999–2010 Chevy, Pontiac and Saturn models. Exhaust flex sections frequently fail from heat, vibration and age, leaving a noisy leak or forcing costly...

Vurkcy's 2.5" inlet to 4" outlet, 9" overall stainless exhaust tip is a bolt-on tailpipe upgrade that adds a polished look and improved exhaust flow for vehicles with a 2.5" outside diameter tailpipe. This universal-style exhaust tip from Vurkcy is built for drivers who...

Jetuplusllc Exhaust Flange Install Kit (30-0205) is a complete, high-polish heavy-duty steel flange and gasket set designed to reinstall or repair exhaust connections on 1984+ Harley Big Twin, Softail, Touring, Dyna and Sportster models (not V‑rod). If you need a durable, ready-to-install flange solution...

TMOFMS Exhaust Tip: a 3" inlet, 4" outlet, 12" overall-length stainless steel tailpipe tip with a wear-resistant matte black finish and simple bolt-on installation. This premium bolt-on exhaust tip is designed to upgrade a truck or diesel tailpipe with minimal effort while improving corrosion...

GESEXI Exhaust Clamp with Hanger is a two-piece, galvanized 2.5" pipe clamp and hanger set designed to secure and support vehicle exhaust systems reliably. These GESEXI clamps combine a 2.5" diameter fastening band with an integrated hanger shank to stabilize exhaust piping while isolating...

A durable stainless steel 3" to 3" exhaust adapter that joins two 3-inch outer-diameter pipes quickly using dual clamps—no welding required. This peastorm exhaust reducer connector is built for straightforward, reliable pipe joins in automotive, marine, or custom exhaust work. Made from stainless steel...

The Dorman 911-236 vapor canister purge valve is a direct-fit replacement part that restores proper evaporative-emission control for compatible Chrysler, Dodge, Jeep and Ram vehicles. If your vehicle’s EVAP system is throwing codes or showing symptoms like rough idle or a fuel smell, a...

Walker Heavy Duty 35618 is a 3" inlet exhaust pipe rain cap engineered to keep water, debris and road spray out of vertical exhaust systems. Built for heavy-duty trucks and vertical-stacked exhausts, the Walker 35618 rain cap is available in aluminized, chrome and silent...

Acrux7's 2.5-inch 45° exhaust elbow is a polished 304 stainless steel mandrel-bent elbow sold in a four-pack, built for durable, corrosion-resistant exhaust and ventilation connections. These 45° elbows are designed to join straight sections of 2.5-inch outer-diameter tubing where a shallow offset or directional...

Vurkcy’s 3-inch Exhaust Y Pipe is a universal stainless-steel Y-shaped connector that merges two exhaust flows into a single 3" outlet across a compact 10" length. This precision-formed Y connector is built to join matching 3" outside-diameter exhaust pipes, offering a durable, mirror-polished stainless...

AUTOKAY 36162-RAA-A01 is a direct-replacement canister purge solenoid valve engineered to restore proper evaporative emissions control on compatible Honda and Acura models. This OEM-style purge valve is built to match the fit and function of the factory part number 36162-RAA-A01 (36162RAAA01) for many Honda...

The A-Premium Vapor Canister Purge Solenoid Valve is a direct-fit replacement part that controls fuel vapor flow from the charcoal canister to the engine for compatible Hyundai and Kia vehicles. Installed near the intake manifold, this OEM-style purge valve restores proper evaporative emissions control...

ZEONHAK 2.5-inch butt joint exhaust clamp sleeves are a 4-pack of 304 stainless steel band clamps designed to deliver even 360° clamping force for secure, corrosion-resistant exhaust pipe and muffler connections. These clamps are built from 304 stainless steel and supplied with bolts and...

Vurkcy's 2.5-inch inlet curved exhaust tip is a bolt-on mirror-polished stainless steel tailpipe tip with a 2.5" outlet and a 9" overall length that upgrades appearance and directs exhaust flow without welding. This curved exhaust tip adds a sleek finishing touch to vehicles with...

Vurkcy's 3-inch Exhaust Y Pipe is a stainless-steel, weld-on connector that merges two exhaust streams into a single 2.5-inch outlet over a 10-inch overall length. This universal Y-shaped exhaust pipe is built for vehicles with a 3-inch outside-diameter tailpipe and is intended to channel...

MAYASAF 911-648 Vapor Canister Vent Solenoid Valve is a direct-replacement EVAP vent solenoid designed to restore proper purge system operation on compatible Buick, Chevy, GMC, Olds and Isuzu models. If your vehicle is showing EVAP-related trouble codes, rough idle, or fuel odor, a worn...

Muyesm Exhaust Valves Bushing Kit is an 8-piece set of rubber-and-metal replacement bushings designed to restore proper exhaust support and alignment on Peterbilt 357, 375–379, and 385 trucks. If your Peterbilt’s muffler or exhaust piping droops, rattles, or shows excess movement, worn hangers are...

A-KARCK's straight mandrel exhaust tube is a 2.5-inch outer-diameter, 17.3-inch long mild-steel pipe made for cutting, welding and building custom exhaust systems. If you're fabricating or repairing an exhaust line, this A-KARCK straight pipe provides a simple, flared-end section that fits easily into multi-piece...

BSTFLEX Exhaust Heat Shield Kit is a heavy-duty 0.5mm embossed aluminum barrier designed to reflect and manage extreme exhaust heat for cars and motorcycles. This kit pairs robust embossed aluminum with stainless steel cable ties to create a flexible, long-lasting thermal barrier that protects...

TOPMV's Purge Valve Solenoid 913430 is a complete, direct-fit replacement vapor canister purge/vent valve kit for specified Ford and Lincoln 4-cylinder models, supplied with connectors and short hoses for a straightforward swap. If your vehicle is showing an EVAP-related trouble code or you need...

LCGP 4 Pack Exhaust Bracket Hanger Rods are heavy-duty, universal 3/8" x 10" support rods with rubber isolators designed to secure and reduce vibration in underbody exhaust systems. This set of four replacement exhaust hanger rods from LCGP provides a straightforward, durable way to...

This ZJXDZY semi direct-fit exhaust converter repair pipe is a 2.5" OD T304 stainless steel 3-bolt flange section designed to restore a secure underbody converter flange connection. If an exhaust flange at your catalytic converter or mid-pipe has failed, this polished T304 stainless repair...

AUROLYNNE's Vapor Canister Purge Valve Hose Pipe is a direct-fit replacement hose designed to restore proper EVAP purge routing on 2016–2019 Jeep Grand Cherokee and Dodge Durango 3.6L V6 Flex models. This replacement hose rebuilds the connection between the vapor canister purge valve and...

VPZMT Exhaust Gasket Flange Install Kit supplies the gaskets, nuts, clips and washers needed to secure exhaust flanges on most 1984–2020 Harley Big Twin, Sportster, Softail, Touring and Dyna models (excludes V‑Rod). This complete installation set is engineered to replace worn flange hardware and...

The Mirthcos 12630282 vapor canister purge solenoid valve is a direct-fit EVAP purge valve designed to restore proper fuel vapor management and reliable emissions control on compatible GM vehicles. If your check engine light is linked to an EVAP system fault or you need...

The Vurkcy 2.25-inch inlet curved exhaust tip is a 9-inch bolt-on stainless steel tailpipe finisher that gives most 2.25" OD exhaust pipes a polished angled exit and improved drainage to reduce corrosion risk. This exhaust tip is designed as a universal add-on for vehicles...

The Dorman 47083 Vacuum Storage Canister is a direct-fit replacement vacuum reservoir built to restore lost vacuum capacity and match the original part's fit and function. If your vehicle’s vacuum reservoir has cracked, been damaged, or gone missing, the Dorman 47083 provides a ready-made...

Wryxia BAV010 is a push-pull, 4-way 2-position manual air valve engineered to control dump-truck tailgates with reliable, service-friendly performance. This compact valve assembly is designed for heavy-duty hydraulic and pneumatic tailgate systems on dump trucks and similar vocational vehicles. Built from aluminum alloy with...

The MOTOKU EVAP vapor canister vent solenoid valve with wiring pigtail is a direct-fit replacement that controls charcoal-canister venting to the atmosphere on compatible GM vehicles. If your vehicle’s EVAP system has generated a check-engine code or you notice fuel vapor odors, a faulty...

PALOZO's 2.25" ID to 2.5" ID stainless steel exhaust adapter is a 5.5" clamp-style reducer designed to join or repair exhaust pipes with 2.25" and 2.5" outer diameters quickly and without welding. This compact connector lets you couple two exhaust sections with slightly different...

Jones Exhaust JTD112 is a single-piece mild steel, chrome-plated turn-down exhaust tip with a 1.75" opening and an 8" length designed to fit 1.5" pipes. This chrome turn-down tip adds a clean, finished look to aftermarket or replacement exhaust systems while directing exhaust flow...

Ummickl's 12" x 48" gold adhesive heat shield is a reflective, adhesive-backed fiberglass tape designed to protect surfaces from intense radiant heat up to extremely high temperatures. This adhesive heat wrap combines a reflective gold facing with a durable fiberglass core and a peel-and-stick...

The Ucreative 2" x 50' fiberglass exhaust heat wrap (two rolls) is a high-temperature sleeve that insulates exhaust headers and pipes to reduce under-hood heat and improve exhaust flow. This dual-pack of Ucreative heat wrap provides 100 feet of 2-inch-wide fiberglass wrap plus 20...

Piclafe's 1.5" x 72" universal flexible exhaust pipe is a corrosion-resistant, easy-to-install replacement flex section designed for mufflers, downpipes, headers, and exhaust joints. This flexible exhaust tube delivers a durable, rust-resistant connection when you need vibration isolation or a custom fit in a vehicle's...

DEGEOBERLIN's Titanium Pipe Heat Shield is a flexible, two-layer exhaust guard (4" x 8") that reduces radiant heat and protects nearby parts, boots, and legs while including two stainless-steel clamps for fast installation. If you work on motorcycles, ATVs, or performance cars, controlling exhaust...

XinDeLeiHuan 2.5" T304 stainless steel straight exhaust pipe with a flared slip-fit end provides a durable, polished connector for custom exhaust systems. Built from T304 stainless steel and finished with a polished surface, this 2.5-inch inner-diameter (ID) slip-fit tubing serves as a universal adapter...

The SKYMIRO 5" exhaust clamp is a 304 stainless-steel lap-joint band designed to join 5" OD pipe to 3" ID pipe with a durable, leak-minimizing 360° seal for mufflers, elbows, catalytic converters and exhaust tubing. This two-piece clamp set offers a corrosion-resistant, no-weld connection...

SUISFLXGRO Exhaust Flex Pipe is a universal, 100% stainless-steel flex connector designed to replace or repair mid- and rear-section exhaust runs on cars and heavy-duty vehicles using the included clamps. This flex pipe delivers a corrosion-resistant, two-ply braided construction that reduces vibration and isolates...

ROADFORMER 5-inch 304 stainless steel lap-joint band clamps (2-pack) are heavy-duty exhaust clamps designed to join overlapping 5" OD to 5" ID exhaust pipes with a full 360° seal and corrosion-resistant performance. These clamps are engineered for exhaust systems on cars, trucks, and industrial...

ROADFORMER 3.5 inch 304 stainless-steel lap joint exhaust band clamps (2-pack) securely join overlapping 3.5" OD to 3.5" ID exhaust components for a durable, leak-minimizing seal. These clamps are made to join muffler insets/outsets, elbows, flex pipes and other exhaust tubing where a 3.5"...

The Dorman 310-219 evaporative emissions system leak detection pump is a direct-fit replacement designed to restore the EVAP leak detection function on specified Fiat, Dodge, Jeep, Ram, Chrysler and Alfa Romeo models. This replacement pump replicates the fit and operation of the original factory...

SsllZdq Vacuum Solenoid Valve and Check Valve Combo Kit restores proper vacuum control for Ford F150 (2015–2020), Ford Expedition (2018+), and Lincoln Navigator (2018+). If your truck or SUV has a faulty vacuum solenoid or a leaky check valve affecting hub locking, cruise control...

eLifecenter's stainless steel 2.5" exhaust clamp with a 7" hanger rod is a bolt-on solution that secures 2½-inch exhaust pipe runs while resisting corrosion and high heat. Designed for motorists and fabricators who need a reliable, easy-to-install exhaust support, this kit pairs a T201...

EVIL ENERGY 4" muffler U-bolt clamps are a two-piece stainless steel saddle kit designed to join 4-inch outer-diameter exhaust pipes securely without welding. These U-bolt saddle clamps provide a practical, corrosion-resistant solution for connecting muffler inlets, outlets, elbows, and coupling pipes. Constructed from 304...

EVIL ENERGY 5" U-bolt muffler clamps are a two-piece stainless-steel saddle-style kit designed to join and secure 5" outer-diameter exhaust pipes quickly and without welding. When you need a dependable, reusable clamp to connect mufflers, elbows or coupling pipes, this EVIL ENERGY kit gives...

EVIL ENERGY 3.5" muffler U‑bolt clamps are a two‑piece stainless steel saddle clamp kit that secures 3.5‑inch OD exhaust pipes without welding. These clamps provide a corrosion‑resistant mechanical connection for muffler inlets, outlets, elbows and coupling pipes where a tight, removable seal is needed....

EVIL ENERGY 3" Muffler Clamps are heavy-duty 304 stainless steel U-bolt saddle clamps designed to join 3-inch OD exhaust pipes quickly and securely without welding. When repairing or modifying an exhaust system you need a clamp that resists heat, vibration and corrosion while forming...

VehiMata 2.5 Exhaust Clamp is a two-piece 2.5" OD butt-joint sleeve coupler designed to join 2.5" exhaust pipes quickly, securely, and without welding. This stainless-steel band clamp from VehiMata is built for repair, replacement, and custom exhaust work where a reliable, repeatable connection is...