KPALAG

KPALAG rear left and right door latch cables replace worn or broken latch cables on Dodge Ram 1500, 2500, and 3500 models from 1998–2002 to restore reliable door opening and locking. If your Ram’s rear doors are sticking, only sometimes unlocking, making noise when...

KPALAG Fuel Injection Pressure Regulator 3.8BAR is a direct-fit replacement regulator with clip and snap ring designed to restore correct fuel rail pressure on compatible GM vehicles. This precision replacement part is built from stainless steel and high-durability fluororubber O-rings to resist corrosion, oil...

The KPALAG 1/2" Drive Fuel Tank Lock Ring Tool is a heavy-duty, heat-treated high-carbon steel spanner designed to remove and install fuel pump senders and lock rings quickly and safely using an impact wrench or breaker bar. This specialized automotive tool replaces improvised wrenches...

KPALAG's stainless steel crankshaft turning socket is a CNC-machined, durable tool made to rotate Small Block Chevy V8 crankshafts (1955–2000 SBC and 200/262 1978–2006) using a 1/2" drive. This crankshaft turning socket replaces softer aluminum tools with a 201 stainless steel design, giving you...

KPALAG Engine Coolant Thermostat Assembly with O-ring is a direct-fit replacement thermostat that opens at 192°F to help maintain correct engine operating temperature for compatible Ford V8 applications. This solid-state thermostat assembly uses a paraffin expansion element and durable metal components to regulate coolant...

KPALAG 2" 4° steel leaf spring shims are a two-piece set of 1045-steel angle-correction shims designed to adjust axle or driveshaft angle by 4 degrees for improved alignment and load distribution. When your leaf-spring suspension or axle geometry needs a small, precise adjustment, these...

KPALAG Oil Pressure Fuel Pump Pressure Shut Sensor Switch is a direct-replacement sensor that monitors engine oil pressure and signals the fuel pump shut-off for Mercruiser V8 engines. If your Mercruiser-equipped boat shows a persistent oil-pressure warning or you suspect the fuel pump isn't...

KPALAG’s box handle and grommet kit is a direct-fit replacement for Ram bed extender pivot handles and grommets, built to resist corrosion and restore smooth release action. This kit supplies the pivot joint grommets and rotation release handles used on Dodge Ram bed extenders,...

KPALAG HVAC blower motor resistor with connector wire harness replaces 4C2Z19A706AA / F6UZ19A706AA to restore multi-speed fan control on compatible Ford E- and F-series vehicles. This replacement blower motor resistor assembly is designed for manual HVAC systems on many Ford E-150, E-250, E-350, E-450,...

KPALAG 12V Power Socket is a direct-fit front cigarette lighter outlet replacement designed to restore 12V power to compatible Nissan and Infiniti models quickly and safely. When a vehicle's factory 12V outlet becomes worn, intermittent, or stops working entirely, replacing it with a reliable,...

KPALAG's upgraded fuel filter cup wrench is a heavy‑duty open‑style tool built to remove and install the 6P3‑WS24A Yamaha fuel filter cup on 2006‑current F150–F350 and 2.6L/3.3L 4‑stroke outboards. If you service Yamaha outboard fuel systems, this wrench simplifies access to the fuel filter...

KPALAG's 304 stainless steel transmission oil fill adapter provides a sealed, dual-mode connection for accurate fluid filling on GM 8L90 8-speed transmissions. This adapter is a direct-fit replacement for DT-51190 engineered for vehicles that use the GM 8L90 gearbox, which lacks a factory oil...

KPALAG's blower motor resistor and pigtail harness kit restores multi-speed HVAC control for Toyota Tacoma models with manual air conditioning from 2005 through 2020. If your Tacoma's fan only runs on high, doesn't respond to speed settings, or blows intermittently, a failed blower motor...

KPALAG rear turn signal light socket kit is a direct-fit replacement assembly (sockets, pigtails and bulbs) designed to restore reliable turn-signal connection for select Ford F-Series Super Duty, Fiesta and Mustang models. This plug-and-play kit replaces worn or corroded lamp holders and includes two...

KPALAG 100-piece aluminum oil drain plug gasket kit is a direct-fit crush washer set designed to replace OEM part 90430-12031 for many Toyota, Lexus and Scion models. Swapping a worn drain plug gasket prevents oil leaks after every oil change. This kit includes 100...

KPALAG’s 304 stainless steel transmission oil fill adapter is a direct-fit tool that lets you add or top up fluid on compatible Infiniti and Nissan 7-speed gearboxes cleanly, accurately, and without leaks. Designed for professional mechanics and DIY enthusiasts who work on Infiniti and...

KPALAG's crankshaft position sensor is a drop-in replacement that monitors crank angle and speed to restore accurate ignition timing and fuel control for compatible 2000–2003 Harley‑style touring and Dyna models. This high-quality aftermarket sensor is designed to match OEM fit, form, and function while...

Durable replacement rear handle grips for Yamaha jet boats, sold as a 2-pack with mounting hardware for straightforward installation. If the original rear handles on your Yamaha jet boat are cracked, loose, or worn smooth, these KPALAG rear handle grips are engineered to restore...

KPALAG 2PCS Upgraded Back Panel Air Vent Relief Grilles are direct-fit cabin pressure relief vents designed to replace GM part 13596856 on compatible Colorado, Silverado and Sierra trucks. This pair of vent grilles restores proper cabin pressure equalization and replaces worn or damaged factory...

KPALAG PCV valve tubing with bypass valves is a direct-fit replacement hose that restores crankcase ventilation for 1.4L Chevrolet Cruze, Sonic, Trax and Buick Encore engines. If your vehicle has oil blow-by, rough idle, or an engine bay vacuum leak traced to the crankcase...

KPALAG's replacement right-side cargo door upper and lower latch release cable restores reliable door operation on Ford E-Series vans (1992–2009). If your passenger-side cargo door struggles to latch or requires extra force to close, worn or stretched release cables are often the culprit. This...

KPALAG 4-piece wheel center hub cap set replaces factory caps on 17" 5 twin-spoke silver wheels for Toyota Tundra (2003–2006) and Sequoia (2003–2007), restoring wheel appearance with durable ABS construction. These hub caps are engineered as direct-fit replacements for worn, scratched, or missing center...

KPALAG EFI Fuel Check Valve Assembly is a direct-fit replacement check valve and hose kit engineered to restore proper one-way fuel flow on 2003–2007 Harley-Davidson Road King, Road Glide, Street Glide and Electra Glide models (Replace# 62228-03). If your Harley is showing signs of...

KPALAG EFI Fuel Check Valve Assembly is a direct-fit replacement for select 2001–2007 Harley-Davidson Softail models that prevents fuel backflow and restores reliable EFI fuel line operation. If your Softail (Fat Boy, Heritage, Deluxe, Deuce, Night Train, Standard or Springer) shows erratic fuel flow...

KPALAG's power outlet base socket with mounting ring replaces OEM cigarette lighter sockets in compatible Dodge, Chrysler and Jeep models for a reliable, heat-resistant replacement. If your vehicle's 12V cigarette lighter or power socket is loose, damaged, or no longer delivering steady power, this...

KPALAG HVAC Blower Motor Resistor Kit is a direct-fit replacement that restores dashboard fan-speed control for compatible Chevrolet Sonic, Spark, and Trax models. This kit includes a heater/AC blower motor resistor and a heavy-duty 13 AWG connector wire harness engineered to match OE fit...

KPALAG's upgraded aluminum radiator upper hose connector is a direct-fit replacement for Toyota RAV4 (2009–2012) models that restores coolant flow and improves durability over the original plastic part. If your RAV4 is showing signs of coolant leaks or the factory plastic heater inlet tee...

KPALAG’s upgraded aluminum engine coolant pipe bracket hose set replaces brittle plastic fittings to deliver a longer-lasting, direct-fit cooling connection for compatible Toyota Corolla and Matrix models. This replacement assembly includes an aluminum coolant pipe bracket and matching hose components engineered to fit Toyota...

KPALAG White Fuel Fill Door is a direct-fit replacement fuel tank filler cover and stainless-steel pin designed to restore the fuel door fit and finish on Ram ProMaster 1500/2500/3500 model years 2014–2021. If your Ram ProMaster's fuel door is dented, scratched, missing, or the...

KPALAG's natural rubber bowl seal kit replaces worn flush ball and bowl gaskets for Dometic/Sealand toilets, restoring a tight, non-stick seal in RV and marine heads without overflow holes. If your RV or boat toilet has begun to leak, lose vacuum, or show signs...

KPALAG 2-pack front headlight wiring harnesses replace factory sockets to restore reliable electrical connection for Chevy Silverado 1500, 2500HD, and 3500HD (2008–2014). These KPALAG headlamp socket assemblies supply a direct-fit replacement for worn or damaged front headlight connectors on specified Silverado models. Built with...

KPALAG's aluminum oil bath cap wrench is a corrosion-resistant, 2-1/2" hex tool engineered to remove and install Dexter-style trailer axle oil caps quickly and securely. Designed for trailer owners, mechanics and fleet managers, this wrench replaces OE K71-704-00-style tools and is sized specifically for...

KPALAG replacement diesel fuel injector return line assembly set restores secure, leak-free fuel return for 2004.5–2010 GM Duramax 6.6L engines. If the original return hoses and fittings on your Silverado, Sierra, Suburban, Yukon or Escalade have become brittle, cracked or damaged during service, this...

KPALAG rear suspension spindle knuckle bushing is a direct-fit replacement that restores rear steering knuckle support and reduces play for Chevrolet Malibu (2016–2020) and Buick Regal Sportback/TourX (2018–2020). When the rear suspension spindle knuckle bushing wears out, many owners notice loose handling, unusual clunks,...

KPALAG's upgraded turbo intercooler outlet tube hose kit replaces the factory intercooler charge tube on 2017–2019 Ford F-250 and F-350 6.7L PowerStroke trucks to restore boost integrity and prevent boost leaks and related driveability issues. This complete intercooler outlet hose kit is a direct-fit...

KPALAG's matte-black stainless-steel cast gear shift lever is a direct-fit replacement for multiple Polaris Ranger 1000 and PRO XD models from 2018–2025, restoring reliable shifting and improved durability. If your Polaris Ranger’s factory shift lever is worn, cracked, or corroded, this KPALAG replacement is...

KPALAG Cold Side Intercooler Tube Hose Pipe Kit is a complete four-piece replacement assembly that restores charge-air flow for 6.7L Ford Super Duty trucks (2011–2016), matching OEM fitment for part 667-300. This intercooler pipe kit replaces the cold-side charge air plumbing on Ford F250,...