MSD

MSD 8214 is a 0.8 ohm ballast resistor engineered to protect ignition coils when used with traditional points-style ignition systems. Designed for older vehicles that retain mechanical breaker points, the MSD 8214 resistor controls coil current during normal running to reduce coil overheating and...

A compact replacement bushing and spring kit engineered to restore smooth shaft rotation and reliable mechanical advance in MSD billet and Pro‑billet distributors. When a distributor shows play, rough rotation, or inconsistent advance, replacing worn internal bushings and springs often brings the assembly back...

MSD 8222 Blaster is a canister-style ignition coil engineered to deliver high-voltage output and durable performance in high-vibration applications. The MSD 8222 Blaster coil swaps into electronic ignition systems to provide stronger spark energy while resisting the stresses of tough operating environments. Encased in...

The MSD 82023 Blaster 2 is a high-output, oil-filled ignition coil engineered to deliver stronger spark energy for MSD 5, 6 and 7 series ignition systems and compatible electronic or points-based ignitions. This compact black Blaster 2 coil from MSD is built for performance...

MSD 8482 is a red distributor cap and rotor kit engineered as a direct-fit performance replacement for Ford V8 TFI ignitions from 1985–1995. This kit includes a molded high-voltage insulating distributor cap and a matching rotor designed to restore reliable spark delivery in classic...

MSD 84335 is a matched red HEI distributor cap and rotor kit engineered to restore reliable spark distribution and simplify routine ignition maintenance. Routine ignition upkeep matters: worn distributor caps and rotors can cause misfires, weak starts, and uneven performance. MSD’s 84335 kit pairs...

MSD 8202 Blaster 2 is a high-output, oil-filled ignition canister coil engineered to boost spark energy for MSD 6- and 7-series systems and other ignition setups. The MSD 8202 Blaster 2 replaces stock coils with a compact, hard-hitting canister that delivers higher secondary voltage...

MSD 84661 is a direct-fit magnetic pickup assembly designed to replace the factory sensor in all MSD Pro-Billet distributors, restoring reliable ignition signal without additional tuning. If your engine’s distributor has an aging or failed pickup, the MSD 84661 offers a straightforward service replacement...

MSD Street Fire 8362 is a complete HEI distributor assembly with a red cap, internal coil and module engineered for reliable street performance and long-term durability. Built as MSD’s value-oriented Street Fire line, the 8362 HEI distributor supplies a higher-quality replacement than inexpensive imports...

MSD Street Fire 5553 is a 9-piece, universal 8mm spark plug wire set engineered for low-resistance ignition delivery and heat-resistant durability. Designed for V8 engines and common high-energy ignition systems, the Street Fire 5553 kit supplies a full complement of varying-length wires and HEI/distributor...

MSD Ignition 8733 is a compact 2-step launch control module designed to let GM LS engines hold a preset RPM for consistent, repeatable launches. Built for drag racers and performance street drivers using GM LS platforms, the MSD 8733 adds a simple, reliable way...

MSD 35599 Super Conductor is an 8.5mm red spark plug wire set engineered to deliver strong, suppressed spark performance for Small Block Chevy engines with an HEI distributor cap. Built for racers, restorers, and high-performance street vehicles, this MSD wire set pairs a low-resistance...

The MSD 8920 is a compact magnetic-pickup tachometer and fuel adapter that converts a magnetic pickup signal into a stable tach output for aftermarket tachometers, fuel controllers, and ignition systems. Designed for performance vehicles and custom ignition installations, the MSD 8920 provides a clean,...

MSD 32819 Super Conductor Spark Plug Wire Set is an 8.5mm red, synthetic/silicone-jacketed ignition wire kit built for low resistance, high EMI suppression, and durable performance on select GM V8s. This wire set replaces factory leads on compatible Chevrolet and Pontiac models with a...

MSD 8207 Blaster SS is a compact, epoxy-filled high-output ignition coil engineered to deliver stronger spark voltage for MSD 6- and 7-series and most electronic ignition systems. This single red MSD Blaster SS coil combines a rugged housing and optimized winding geometry to produce...

The MSD 6014 Ignition Controller in red is a compact digital ignition box designed to improve spark energy and timing control for high-performance gasoline engines. The MSD 6014 is a dedicated ignition controller from MSD that delivers consistent, high-voltage spark performance in a small,...

MSD 8227 Ford TFI Coil is a high-performance replacement ignition coil engineered to deliver strong secondary voltage and consistent spark for Ford trucks and cars using the TFI distributor system. Built by MSD for enthusiasts and technicians who want reliable spark energy without altering...

The MSD 6201 Digital 6A Ignition Control is a compact, red high-performance module that delivers capacitive-discharge spark energy for 4-, 6- and 8-cylinder engines, improving starts, throttle response and idle quality. Designed for street rods, muscle cars and any vehicle needing a dependable aftermarket...

The MSD 82073 Blaster SS Series ignition coil is a high-output, stainless steel-wound coil engineered to boost spark energy for electronic and MSD 6-Series ignition systems. This compact, black-finished coil is built to deliver stronger voltage and consistent performance for street and race applications....

MSD 82738 is a red, direct-replacement ignition coil pack engineered to restore reliable spark for 2000–2006 Jeep vehicles with the 4.0L engine. When an aging or failed coil pack causes misfires, rough idle, or reduced performance, the MSD 82738 offers a straightforward fix: a...

MSD 6425 Digital 6AL is a compact, high-energy ignition control box with built-in rpm limiting and universal compatibility for 4, 6, or 8-cylinder engines. Designed for racers and performance street machines, the MSD 6425 Digital 6AL delivers a strong 530-volt, 135 mJ spark while...

MSD 31193 is an 8-cylinder, universal 8.5mm Super Conductor spark plug wire set in black that includes multi-angle boots, a 32" coil wire and a Mini-Stripper-Crimper so you can cut and fit wires to most engines. Whether you're rebuilding a classic V8 or upgrading...

MSD 35593 is an 8.5mm Super Conductor spark plug wire set engineered to deliver low-resistance spark delivery and strong EMI suppression for performance and street vehicles. This black MSD 35593 wire set combines a low-ohm conductor, a heat- and abrasion-resistant jacket, and a ferro-magnetic...

MSD 32829 is a red 8.5mm super conductor spark plug wire set engineered for low resistance, minimal EMI, and direct bolt‑on performance for specified vehicles. This MSD wire set combines a tightly wound copper‑alloy conductor and a ferro‑magnetic impregnated core to reduce resistance and...