-
Vendor:A-Premium
A-Premium Belt Tensioner Assembly for 3.6L V6 — Single V-Ribbed Pulley, OEM Fit (2011–2020)
A-Premium Belt Tensioner Assembly with Pulley delivers consistent belt tension and smooth accessory drive performance for Chrysler, Dodge, Jeep, Ram and Volkswagen 3.6L V6 engines. This OEM-style replacement combines a single V-ribbed pulley with a precision-built tensioner to restore proper belt alignment and reduce...- $94.25
- $94.25
- Unit price
- per
-
Vendor:A-Premium
A-Premium Belt Tensioner Assembly with Pulley Compatible with Dodge Jeep Ram Mitsubishi — Direct-Fit, Includes Two V-Ribbed Pulley
A-Premium Belt Tensioner Assembly with Pulley is a direct-fit replacement designed to restore correct serpentine belt tension on compatible Dodge, Jeep, Ram and Mitsubishi V6/V8 engines. If your vehicle shows noise from the accessory drive, belt slippage, or visible wear on the tensioner pulley,...- $108.85
- $108.85
- Unit price
- per
-
Vendor:ACDelco
ACDelco Gold serpentine belt K060935HD — heavy-duty V-ribbed multi-groove replacement, OE-fit durability
ACDelco Gold K060935HD is a heavy-duty, multi-ribbed serpentine belt engineered as a premium aftermarket replacement to drive your engine accessories with OE-style fit and durability. This ACDelco Gold serpentine belt replaces worn factory belts and keeps critical accessories—like the alternator, power steering pump, and...- $93.81
- $93.81
- Unit price
- per
-
Vendor:Allstar Performance
Allstar Performance lower radiator hose 1-3/4" x 16-1/2" — two-ply abrasion-resistant, heat-tolerant
Allstar Performance ALL30224 is a two-ply, abrasion-resistant lower radiator hose sized 1-3/4" x 16-1/2" built to flexibly route coolant while resisting cracking and hardening. This replacement lower radiator hose is designed for reliable coolant transfer in a range of vehicle applications. Constructed with two...- $91.41
- $91.41
- Unit price
- per
-
Vendor:A-Premium
A-Premium Belt Tensioner Assembly with Pulley for Chevrolet/Buick 1.4L — 70mm Pulley, OE-Style Direct-Fit
The A-Premium Belt Tensioner Assembly with Pulley is a direct-fit replacement that restores correct V-ribbed belt tension for select Chevrolet and Buick 1.4L petrol engines. Designed as a robust, OE-style substitute, this belt tensioner assembly includes a single pulley and bearing engineered to match...- $87.99
- $87.99
- Unit price
- per
-
Vendor:Meonum
Meonum 30FT 3/8" Fuel Line Hose — 300 PSI NBR High-Pressure with 20 Clamps
Meonum 30FT 3/8" ID fuel line hose is a high-pressure NBR rubber hose rated to 300 PSI that provides a long, durable, cut-to-size solution for fuel, oil, and vacuum lines. This 30-foot length of 3/8" inner diameter fuel hose is built for installers, mechanics,...- $102.59
- $102.59
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/8" ID Fuel Line Hose 20FT — SAE 30R7 NBR Rubber Push-Lock, 300 PSI Oil-Resistant
EVIL ENERGY 3/8" ID Fuel Line Hose is a 20-foot SAE 30R7 NBR rubber push-lock hose designed to deliver fuel, oil, and related fluids reliably for small engines and outdoor equipment. This heavy-duty fuel line is engineered to meet SAE 30R7 standards, combining nitrile...- $108.85
- $108.85
- Unit price
- per
-
Vendor:Shineyoo
Shineyoo Silicone Vacuum Tubing Kit - 6×10ft (1/8"–3/8") High Temp, 3mm Wall
Shineyoo 6-piece silicone vacuum tubing kit supplies six 10-foot rolls of high-performance vacuum hose in the most common inner diameters for automotive, marine, and industrial use. This kit gathers the 6 frequently used inner diameters into one package—1/8", 5/32", 3/16", 1/4", 5/16" and 3/8"—with...- $100.50
- $100.50
- Unit price
- per
-
Vendor:Shineyoo
Shineyoo Fuel Line Hose Kit 6 Sizes (5 ft) with 30 Clamps — NBR Rubber, Braided Reinforced, High-Pressure
Shineyoo's 6-size fuel line kit supplies six common inner-diameter rubber NBR hoses (each 5 ft) plus 30 matching clamps for repairs and upgrades on small engines. This kit is built for mechanics, tinkerers and homeowners who service lawn mowers, ATVs, cultivators, tractors and other...- $94.25
- $94.25
- Unit price
- per
-
Vendor:Jeemiter
Jeemiter Fuel Hose 3/8" ID 25ft Kit — SAE 30R7 NBR, 300 PSI Working Pressure
Jeemiter's 3/8" ID Fuel Hose 25FT kit is a SAE 30R7-rated NBR fuel line designed to handle gasoline, diesel, biodiesel and engine oil systems at high working pressures. This 25-foot, 3/8-inch inner diameter hose is built for demanding vehicle and fluid-transfer tasks where oil...- $98.42
- $98.42
- Unit price
- per
-
Vendor:JAVOUKA
JAVOUKA Belt Tensioner & Serpentine Belt Kit for Dodge Avenger 3.6L 2013–2014 — Tensioner, Idler & 6PK1960 Belt
Complete serpentine belt drive kit for Dodge Avenger 2013–2014 with a heavy-duty tensioner, idler pulley and 6PK1960 belt designed to restore proper belt routing and tension. If your vehicle is showing signs of a worn accessory drive—squealing belts, accessory noise, or visible belt damage—replacing...- $113.02
- $113.02
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN6 Braided Fuel Line Kit 10ft Black CPE Nylon – 750 psi Working, High-Temp Resistant
EVIL ENERGY 6AN Fuel Line Kit is a 10-foot, black CPE inner hose with 304 stainless and nylon braided reinforcement designed for high-pressure fuel and fluid routing in automotive and racing applications. This 6AN fuel hose kit combines a chemically resistant CPE inner tube...- $104.68
- $104.68
- Unit price
- per
-
Vendor:Outus
Outus Silicone Heater Hose 3/4" ID 10ft Blue – Reinforced, Heat-Resistant Coolant Line
The Outus 3/4" ID, 10ft blue silicone heater hose is a flexible, reinforced coolant line built to withstand high temperatures and pressures for radiator, heater, and engine cooling applications. This 10-foot coil of blue silicone hose is engineered as a durable replacement or upgrade...- $94.25
- $94.25
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/8" Marine Fuel Line Hose 10FT Type A1-15 SAE J1527 — marine-grade, low-permeation durability
EVIL ENERGY 3/8" Marine Fuel Line Hose Type A1-15 is a 10-foot, marine-grade rubber fuel hose built to SAE J1527/A1-15 standards for safe, low-permeation fuel delivery on pleasure boats. This fuel hose combines a nitrile rubber (NBR) inner tube, an NBR+PVC outer cover, and...- $92.16
- $92.16
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/4" Silicone Heater Hose 10FT – SAE 20R3, 60 psi working, -67°F to 356°F
EVIL ENERGY 3/4" Silicone Heater Hose is a durable 10-foot coolant and heater line built to SAE 20R3 Class A standards, handling -67°F to 356°F and rated to 60 psi working pressure. This silicone heater hose combines braided polyester reinforcement with inner and outer...- $96.33
- $96.33
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 1" Silicone Heater Hose 10 ft – SAE 20R3 Class A, 60 PSI, -67°F to 356°F
EVIL ENERGY 1" Silicone Heater Hose is a 10-foot, SAE 20R3–compliant coolant and heater hose built from braided polyester and silicone layers to handle -67°F to 356°F with a 60 psi working pressure. This heavy-duty heater hose is designed for automotive cooling and heating...- $110.94
- $110.94
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 10AN PTFE Fuel Hose 10FT Black — AN10 Nylon-Braided, E85-Resistant
EVIL ENERGY's 10AN PTFE fuel hose is a durable, 10-foot AN10-rated, nylon-braided PTFE line designed for E85, gasoline, diesel and high-temperature automotive fuel systems. This hose combines a smooth PTFE inner liner with a tough nylon braid to resist chemical attack, high temperatures and...- $102.59
- $102.59
- Unit price
- per
-
Vendor:Ruikarhop
Ruikarhop 3/4" x 10ft Fuel Transfer Hose — 300 PSI Working, Kink-Resistant for Gasoline & Diesel
Ruikarhop's 3/4" x 10ft fuel transfer hose is a reinforced, kink-resistant hose built to safely move gasoline, diesel, biodiesel and other petroleum liquids on farms and work sites. This 10-foot fuel hose combines a nitrile inner tube, braided fiber reinforcement and a durable PVC/nitrile...- $117.20
- $117.20
- Unit price
- per
-
Vendor:A-Premium
A-Premium Belt Tensioner Assembly for Honda & Acura V6 — Direct-Fit with 2 Pulleys, OE Match
The A-Premium belt tensioner assembly with pulley is a direct-fit replacement designed to restore proper V-ribbed belt tension and quiet operation for compatible Honda and Acura V6 engines. This replacement tensioner and its two pulleys are engineered to match original-equipment dimensions and reference numbers...- $110.94
- $110.94
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3/4" Fuel Hose 10 ft — NBR SAE 30R7, 200 PSI Oil-Resistant Flexible Line
EVIL ENERGY's 3/4" NBR SAE 30R7 fuel hose is a 10-foot, oil-resistant line designed for diesel, gasoline, biodiesel and other fuel system fluids with a 200 psi working pressure. This fuel hose delivers a balance of flexibility, chemical resistance and braided reinforcement for automotive...- $110.94
- $110.94
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN6 Nylon-Braided Fuel Hose 20ft Black — CPE Inner, 750 PSI Working Pressure
EVIL ENERGY 6AN 20FT nylon-braided CPE fuel hose is a high-pressure, corrosion-resistant fuel and fluid line designed for performance vehicles and industrial applications. This 20-foot black AN6 hose combines a CPE rubber inner tube, 304 stainless steel reinforcement, and a nylon outer braid to...- $113.02
- $113.02
- Unit price
- per
-
Vendor:Dianrui
Dianrui Hose Clamp Kit 222-Piece 6-70mm (304 Stainless) Worm-Gear Clamps with Box & Tools
Dianrui 222-piece hose clamp assortment supplies heavy-duty 304 stainless steel worm-gear clamps in ten sizes, plus screwdrivers and a spanner, all organized in a portable carry box. This comprehensive kit includes 220 corrosion-resistant hose clamps covering 6–70mm (1/4"–2-3/4") and two adjustment tools, designed to...- $117.20
- $117.20
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 4.0" V-Band Clamp Kit with Male/Female Flanges — 304 Stainless Steel, T-Bolt Quick-Release
EVIL ENERGY's 4.0-inch V-band clamp and matched male/female flanges join 4.0" ID to 4.0" OD pipe for a reliable, reusable seal in exhaust and turbo plumbing. This stainless-steel V-band kit streamlines connections where you need strong alignment, quick disassembly and a compact fit. Designed...- $98.42
- $98.42
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3.0" V-Band Clamp Kit with Male/Female Flanges — Stainless Steel, CrMo T-Bolt
EVIL ENERGY's 3.0-inch V-band clamp with male/female flanges is a stainless-steel coupling that securely joins 3.0" ID to 3.0" OD pipes for exhaust and turbo plumbing. This V-band assembly is engineered for repeatable, high-strength connections where fast disassembly and precise alignment matter. The kit...- $90.07
- $90.07
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 1/4" Fuel Hose 25ft SAE 30R7 NBR-lined 300 PSI – Braided Polyester, Flexible
EVIL ENERGY 1/4" Fuel Hose 30R7 is a 25-foot, NBR-lined, braided polyester fuel line built to handle gasoline, diesel, biodiesel and lubricants at up to 300 psi working pressure. This 25-foot push-lock fuel hose from EVIL ENERGY is engineered to meet SAE 30R7 standards...- $115.11
- $115.11
- Unit price
- per
-
Vendor:Fill-Rite
Fill-Rite fuel transfer hose 3/4 in x 12 ft FRH07512 — nitrile tube, 7" anti-kink spring guard
The Fill-Rite FRH07512 is a 3/4" x 12' professional fuel transfer hose built with a nitrile tube, neoprene cover, internal ground wire, and a 7" anti-kink spring guard for reliable service in demanding fueling jobs. Engineered for commercial and heavy-duty use, this replacement hose...- $109.73
- $109.73
- Unit price
- per
-
Vendor:Outus
Outus Silicone Heater Hose 1" ID 10ft Coil — Blue, Reinforced High-Temp Coolant Hose
Outus 1" ID, 10ft blue silicone heater hose is a flexible, high-temperature resistant coolant and radiator hose supplied in a 10-foot coil for cutting to fit custom engine cooling and heater lines. This reinforced silicone hose combines heat endurance and chemical resistance with pliability...- $113.02
- $113.02
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 5/16 in Fuel Hose SAE 30R7 NBR 20 ft — 300 PSI Oil-Resistant Diesel/Gasoline Line
EVIL ENERGY 5/16" SAE 30R7 NBR fuel hose — a 20-foot, oil-resistant fuel line rated for 300 psi working pressure and built for diesel, gasoline, biodiesel, and oil applications. This heavy-duty fuel hose combines a nitrile butadiene rubber (NBR) inner tube with braided polyester...- $104.68
- $104.68
- Unit price
- per
-
Vendor:Eoppen
Eoppen Spring Hose Clamp Kit 195-Pc (6–38mm) — 23 Sizes with Swivel-Tip Plier & Reinforced Case
Eoppen 195-piece spring hose clamp kit supplies 23 sizes of 65Mn steel clamps plus a swivel-tipped plier for fast, secure low-pressure hose and fuel-line connections. Whether you maintain cars, small engines, garden equipment, or household plumbing, this kit gives a comprehensive selection of low-pressure...- $112.19
- $112.19
- Unit price
- per
-
Vendor:Ruikarhop
Ruikarhop 3/8" ID Rubber Fuel Hose 25ft SAE 30R7 kit with 10 clamps — NBR fuel/oil resistant, −40°F to 257°F
Ruikarhop 3/8" ID Rubber Fuel Hose is a 25-foot SAE 30R7 NBR fuel line kit that resists gasoline, biodiesel and oils and ships with ten metal clamps for engine and fuel-system use. This heavy-duty fuel hose is engineered as a flexible replacement line for...- $96.33
- $96.33
- Unit price
- per
-
Vendor:AUQDD
AUQDD Belt Tensioner and Pulley Assembly for Dodge Ram 2500/3500 (2003–2022) — 5.9L/6.7L Diesel Direct-Replace, OE-Style Durabilit
AUQDD 38285 is a direct-replacement automatic serpentine belt tensioner and pulley assembly engineered to restore correct belt tension and quiet operation on 2003–2022 Dodge Ram 2500 and 3500 trucks with 5.9L or 6.7L diesel turbos. If your Ram has squealing belts, intermittent accessory loss,...- $112.23
- $112.23
- Unit price
- per
-
Vendor:Boltigen
Boltigen 3/4" NPT Fuel Transfer Hose — 10 ft, nitrile core with stainless-steel braid
Boltigen's 10-foot, 3/4" NPT fuel transfer hose is a heavy-duty, flexible line built for safe, leak-resistant transfer of gasoline, diesel, biodiesel and kerosene. This hose pairs a nitrile inner tube with stainless-steel braid and a durable PVC/nitrile outer jacket to deliver reliable fuel handling...- $108.85
- $108.85
- Unit price
- per
-
Vendor:CNPAPC
CNPAPC Drive Belt Tensioner Assembly Kit for Toyota/Scion 2.4L — Tensioner + 7PK1940 Serpentine Belt, OEM Fit
CNPAPC Drive Belt Tensioner Assembly Kit with serpentine belt restores correct belt tension and smooth accessory drive operation for compatible 2001–2010 Toyota vehicles. This complete replacement kit includes the tensioner assembly and a 7PK1940 serpentine belt sized to match the original equipment fit for...- $102.57
- $102.57
- Unit price
- per
-
Vendor:YSIL
YSIL Fuel Line Hose 1" (25mm) ID 6.6ft — NBR Rubber, 300 PSI Oil & Heat Resistant
YSIL 1" (25mm) ID fuel line hose is a 6.6-foot NBR rubber push-lock line engineered for automotive fluid routing with high temperature, oil resistance, and up to 300 PSI working capability. This durable fuel hose combines a nitrile-butadiene (NBR) rubber compound with fiber cord...- $98.42
- $98.42
- Unit price
- per
-
Vendor:Togsher
Togsher 3/4" Fuel Transfer Hose 10 ft — 19mm ID with Male NPT Fittings, 150 PSI Rated, Stainless Braid
Togsher 3/4" Fuel Transfer Hose 10FT delivers a reinforced, flexible fuel line with male NPT fittings for safe, leak-resistant transfer of gasoline, diesel, biodiesel blends, kerosene and other petroleum products. This heavy-duty 3/4" (19mm ID) by 10-foot (3m) fuel transfer hose is engineered for...- $110.94
- $110.94
- Unit price
- per
-
Vendor:Riyhch
Riyhch Serpentine Belt Tensioner & Idler Pulley Kit for Dodge Ram 1500/2500/3500 5.7L 2003-2008 — includes tensioner, two idlers &
Riyhch’s complete serpentine belt tensioner and idler pulley kit replaces worn components on Dodge Ram 1500/2500/3500 5.7L V8 trucks from 2003–2008 to restore proper belt routing and tension. If your 5.7L Hemi Ram shows belt noise, belt slippage, or accessories running intermittently, worn tensioners...- $113.02
- $113.02
- Unit price
- per
-
Vendor:ACDelco
ACDelco V-Ribbed Serpentine Belt 12626222 — GM Original Equipment OEM fit, heat-resistant
The ACDelco GM Original Equipment 12626222 V-ribbed serpentine belt is the factory-style drive belt engineered and validated by GM to power multiple accessories reliably. This serpentine belt is a single, ribbed drive belt designed for GM vehicles and supplied under the ACDelco GM Original...- $97.23
- $97.23
- Unit price
- per
-
Vendor:Goodyear
Goodyear Serpentine Drive Belt 93" 6-Rib (EPDM) — OE Performance, Heat- and Ozone-Resistant
Goodyear 1060930 is a 6-rib, 93-inch serpentine drive belt made from OE-grade EPDM for reliable accessory drive performance on compatible GM, Mercedes-AMG, and select Land Rover vehicles.This replacement belt is engineered to meet original-equipment performance standards and fits a wide range of trucks, SUVs,...- $88.95
- $88.95
- Unit price
- per
-
Vendor:ACDelco
ACDelco Drive Belt Tensioner Assembly with Pulley 38103 (88909593) — Gold, OE-fit 90° Molded Housing
ACDelco Gold 38103 (88909593) is a complete drive belt tensioner assembly with pulley engineered to maintain correct belt tension for smooth accessory drive operation. This ACDelco Gold tensioner assembly is a premium aftermarket replacement designed for reliable fit, form, and function with many General...- $100.07
- $100.07
- Unit price
- per
-
Vendor:MOTOKU
MOTOKU Drive Belt Tensioner and Idler Pulley Kit for Chevy GMC V6/V8 — Direct-Fit, Sealed Bearing
MOTOKU's Drive Belt Tensioner and Serpentine Belt Idler Pulley kit replaces worn tensioners and idler pulleys on a range of Chevy, GMC, Buick and Cadillac V8 and V6 trucks and SUVs. This complete kit includes a high-quality automatic belt tensioner and an idler pulley...- $100.50
- $100.50
- Unit price
- per
-
Vendor:SecosAutoparts
SecosAutoparts Upper & Lower Radiator Hose Set — Chevy/GMC 2007–2014 Direct-Fit 2-Piece
SecosAutoparts upper and lower radiator coolant hoses replace worn factory lines to restore proper coolant flow and prevent leaks in Chevrolet, GMC, Yukon and Cadillac models from 2007–2014. These two-piece radiator hose replacements are designed for direct fitment to a range of GM trucks...- $104.47
- $104.47
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 3.5" V-Band Clamp with 304 Stainless Flanges — Single T-Bolt, Compact Exhaust Joint
EVIL ENERGY's 3.5-inch V-band clamp with matching 304 stainless flanges securely joins 3.5" ID-to-3.5" OD pipes for exhaust and turbo applications. This V-band assembly pairs a male and female flange with a heavy-duty V-band clamp to create a compact, repeatable joint that’s simple to...- $94.25
- $94.25
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY AN6 Braided Fuel Hose 20ft — Black Nylon-Braided, 750 PSI Working Pressure
EVIL ENERGY's 6AN braided fuel line is a 20-foot CPE inner, 304-steel-reinforced, nylon-braided AN6 hose built for high-pressure fuel, oil, and fluid routing. This heavy-duty AN6 fuel hose combines a chemical- and heat-resistant CPE rubber core with a 304 stainless wire reinforcement and a...- $115.11
- $115.11
- Unit price
- per
-
Vendor:EVIL ENERGY
EVIL ENERGY 8AN Nylon-Braided Fuel Hose 10 ft Black — CPE Core, 750 PSI Working
EVIL ENERGY 8AN 10-foot CPE nylon-braided fuel hose is a high-pressure, temperature-resistant line built for fuel, oil, and coolant applications that require durable AN8 connections. This 10-foot AN8-rated fuel hose combines a CPE rubber core, 304 stainless-steel wire reinforcement, and a nylon outer braid...- $98.42
- $98.42
- Unit price
- per
-
Vendor:SZKAIDAG
SZKAIDAG Belt Tensioner with Pulley for Honda CR-V/Civic/Accord 2.4L — Direct-Fit, OE-Style 38278
The SZKAIDAG 38278 Belt Tensioner with Pulley is a complete drive-belt tensioner assembly engineered to restore proper belt tension and smooth accessory drive operation on compatible Honda and Acura 2.3–2.4L engines. This replacement tensioner and pulley assembly fits a range of Honda and Acura...- $104.68
- $104.68
- Unit price
- per
-
Vendor:HYR
HYR Serpentine Belt Kit for Jeep Compass/Patriot & Dodge Journey 2008–2017 — Belt + Tensioner, OE-fit
HYR Serpentine Belt Kit is a complete replacement kit—belt plus matched tensioner components—designed to restore belt drive function on compatible Jeep, Dodge and Chrysler 4‑cylinder models from 2008–2017. This kit bundles a precision‑cast serpentine belt with the tensioner components engineered to the same fit...- $127.63
- $127.63
- Unit price
- per
-
Vendor:A-Premium
A-Premium Serpentine Belt Drive Kit for 1999-2002 GM V8 (4.8L/5.3L/6.0L) — Belt, Tensioner & Idler
A-Premium Engine Serpentine Belt Drive Kit is a complete replacement set—belt, tensioner and idler—designed to restore reliable accessory drive operation on GM 1999–2002 V8 trucks and SUVs. This kit brings together the three wear items most likely to cause squeals, charging problems or accessory...- $154.75
- $154.75
- Unit price
- per
-
Vendor:ApplianPar
ApplianPar Belt Tensioner and Idler Pulley Kit for Ford Explorer F‑150 Expedition (Direct‑Fit, Restores Belt Tension)
This ApplianPar kit supplies a replacement belt tensioner and serpentine idler pulley engineered to restore correct belt tracking and tension on compatible Ford, Lincoln, and Mercury engines. If your vehicle shows belt noise, slipping accessories, or a loose drive belt after many years of...- $128.88
- $128.88
- Unit price
- per
-
Vendor:A-Premium
A-Premium Serpentine Belt Drive Kit for Jeep 4.0L WJ/WRG (1999–2006) — Belt, Tensioner & Pulley
A-Premium Engine Serpentine Belt Drive Kit is a complete replacement kit—belt, tensioner, and tensioner pulley—engineered to restore accessory drive function on Jeep 4.0L WJ Grand Cherokee (1999–2004) and Wrangler (2000–2006) with A/C. This A-Premium kit groups the three critical components that control the accessory...- $152.67
- $152.67
- Unit price
- per
-
Vendor:A-Premium
A-Premium Serpentine Belt Drive Kit for 2002–2008 Chevy GMC V8 (4.8L/5.3L/6.0L) — Belt, Tensioner & Idlers
The A-Premium Engine Serpentine Belt Drive Kit is a complete replacement kit designed to restore proper belt routing and accessory drive function for compatible 2002–2008 Chevrolet, GMC, Cadillac and Hummer V8 models. This kit bundles the serpentine belt and all essential drive components engineered...- $152.67
- $152.67
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.














































