Engine Tools

AUTOWN's Professional Compression Tester Kit is a 13-piece diagnostic set with a high-visibility fluorescent gauge that reads up to 300 PSI for gasoline engines. This compact kit brings workshop-grade compression testing to home mechanics and professional technicians. It includes a triple-scale gauge (PSI, Bar,...

BETOOLL's 14-piece compression tester kit is a compact automotive diagnostic set that checks petrol engine cylinder compression up to 300 PSI, tests spark plug ignition, and measures brake fluid moisture with a handheld pen. Whether you're troubleshooting a misfiring cylinder, verifying engine health before...

BETOOLL 13pcs Compression Tester with Spark Plug Tester is a complete 300 PSI engine compression and ignition-check kit designed to quickly diagnose cylinder pressure and spark issues across petrol engines. This all-in-one kit gives mechanics, DIYers, and fleet technicians the tools to test cylinder...

Yuesstloo Engine Timing Tool Kit is a complete camshaft and crankshaft locking set designed to accurately align and hold timing components on Ford 2.0T/2.3T and Jaguar/Land Rover 2.0T engines. This professional-grade kit groups the locking plates, crank pins, and alignment pins you need to...

Yuesstloo Engine Camshaft Timing Locking Tool Kit is a complete timing alignment set that secures camshafts and crank components so you can set correct TDC and service petrol-injection Jaguar, Land Rover, Ford and Volvo 2.0T/2.3T engines accurately. When working on modern interference engines, precise...

Yuesstloo Engine Timing Tool Kit locks the camshaft and secures the water pump sprocket for GM Ecotec 2.0 and 2.4 engines, letting you set and maintain correct timing during service. Designed for professional mechanics and experienced DIYers, this kit gathers the specialized tools needed...

Yuesstloo Engine Timing Tool Kit is a complete camshaft, crankshaft and flywheel alignment set designed to lock and set timing precisely on GM 2.8–4.2 V6 engines. This professional-grade timing kit was created to match the factory alignment tools used on many General Motors V6...

Yuesstloo Engine Timing Tool Kit is a complete camshaft, crankshaft and VTC locking set engineered to hold timing positions accurately while you change belts or service timing systems on a wide range of Ford, Mazda, PSA and Volvo engines. This professional-grade kit brings together...

Yuesstloo 13PCS Engine Camshaft Timing Locking Tool & Flywheel Locking Tool 303-393 locks camshafts and the flywheel to hold Ford engines precisely at TDC for safe and accurate timing service. This comprehensive 13-piece timing tool kit from Yuesstloo gives mechanics and DIYers the fittings...

DPTOOL Harmonic Balancer Damper Pulley Puller Remove Extractor Kit is a versatile 6-jaw tool set built to extract hard-to-reach engine dampers and pulleys across many GM, Ford, Mitsubishi and other vehicle models without removing the radiator. This professional-grade pulley puller kit combines three thicker...

YSSNIUTOOL 303-1655 is a 7-piece camshaft timing and alignment kit designed to lock and align the camshafts and remove cylinder head screws on Ford 3.5L V6 EcoBoost upgraded engines. This precision alignment set provides the fit, form, and drive needed when performing timing, camshaft...

The BILITOOLS 15PCS Pulley Holder Tool Set is a compact, adjustable 1/2" drive pin-wrench kit designed to hold and turn camshaft and crankshaft pulleys securely during repair and replacement jobs. This all-in-one kit groups an adjustable pin wrench, multiple interchangeable pins, a long 12-inch...

DPTOOL Engine Timing Tool Kit is a complete camshaft, crankshaft and flywheel locking set made to accurately set timing on GM 2.8–4.2 engines. This professional-grade timing tool kit consolidates the specialized locking and holding fittings technicians need to align and secure camshafts, crankshafts and...

DPTOOL Engine Timing Tool Kit for GM Ecotec 2.0 / 2.4 is a complete 15-piece set designed to lock camshafts, hold the water pump sprocket, and set chain tension so you can accurately service timing components on compatible GM engines. This precision kit gathers...

The Innova 3614 Compression Tester Plus is a six-piece diagnostic kit that measures cylinder compression to help locate worn rings, burnt valves, damaged pistons, and head gasket issues on cars, motorcycles, ATVs, and marine engines. This compact kit combines a large, easy-to-read dial gauge...

The Dorman 635-000 is a purpose-built rear crankshaft seal installation tool that centers and guides the rear main seal cover to prevent misalignment and leaks. Replacing a rear main seal cover requires precise alignment to avoid seal damage, oil leaks, and time-consuming rework. The...

DPTOOL Engine Timing Tool Kit for GM Chrysler 2.8L Diesel Duramax is a precision locking set that secures camshafts, crankshaft, and diesel pump components to accurately set or maintain base engine timing. When working on 2.8L Duramax engines found in Jeep, Chrysler and related...

ADsunves High Pressure Oil System Tester is a dedicated IPR air-test kit that lets you isolate and find leaks in Ford 6.0L and 7.3L Powerstroke high-pressure oil systems without commanding the IPR valve. This professional-grade diagnostic kit is built specifically for Ford Powerstroke diesels...

E-cowlboy's 303-770 is a heavy-duty rear main seal installer made to fit Ford Powerstroke 4.5L, 6.0L and 6.4L engines for accurate, damage-free crankshaft seal installation. If you're servicing the rear main seal on a Ford Low Cab Forward, F-Super Duty 250–550 or E-Series with...

DPTOOL Valve Pressure Spring Installer Remover for BMW 117110 is a rugged, high-precision tool engineered to remove and install valvetronic valve springs on BMW N-series engines without harming the cylinder head. This professional-grade tool is built specifically to fit BMW engine families including N13,...

ReluxGo Camshaft Timing Tool Kit is a complete alignment and locking set engineered to correctly time chain-driven 4.0L SOHC V6 Ford and compatible engines. This professional-grade kit bundles every specialized pin and bracket required to lock camshafts and crank when installing or servicing timing...

DKwoeshg Master Engine and Transmission Oil Pressure Test Set is a complete diagnostic kit with high- and low-pressure gauges plus 14 adapters to quickly check oil pressure on most cars and light trucks. This heavy-duty kit combines a wide selection of thread adapters, two...

The DASBET Exhaust Pipe Expander Tool Set is a seven-collet, heavy-duty kit designed to accurately stretch and flare steel and stainless exhaust tubing from 1-5/8" up to 4-1/4" for leak-free connections. Whether you run a professional shop or work on weekend projects, this DASBET...

Lisle 39000 is a no-slip pulley puller that safely removes and installs pressed-on pulleys for power steering, alternator, and air pump applications without slipping. The Lisle 39000 No Slip Pulley Puller is built to grip the entire pulley hub so you can extract or...

Yuesstloo's Cam Timing Tool Kit with Engine Brake Adjustment Tool is a complete 16-piece set built to align camshaft timing and adjust Jake brake screws precisely on Cummins diesel engines from 2007–2017. If you work on heavy-duty Cummins engines—ISX (2016–2017), QSX, X15 or earlier...

Yuesstloo's 30-piece alternator pulley and decoupler removal/install kit is a comprehensive tool set designed to safely remove and fit a wide range of vehicle alternator pulleys. This complete kit brings together a broad selection of adapters, splines, drills and holding tools in a compact...

The E-cowlboy IPR Air Test Kit is a purpose-built fitting and hose assembly that lets you pressure-test the Ford 6.0L–7.3L Powerstroke high-pressure oil system for leaks without an IPR valve or scan tool. This compact kit contains the proprietary adapter, heavy-duty hydraulic hose, and...

The Lisle 37200 is a purpose-built timing tool kit that locks camshaft positions and secures the secondary chain tensioner when servicing Ford 3.5L and 3.7L V6 timing chains. When working on Ford Duratec/3.5L and 3.7L V6 engines, maintaining precise camshaft alignment and immobilizing the...

8MILELAKE Valve Spring Compressor is a universal, heavy‑duty tool kit designed to remove and install valve springs and stem seals on OHV and OHC engines with the head on or off. When working on cylinder heads, seals, or valve springs, this kit gives technicians...

VCT's Oil Pressure Tester Tool Kit is a complete diagnostic set with two high-accuracy gauges (0–100 psi and 0–400 psi), a 72-inch oil-resistant hose, and 14 adapters to test engine and transmission oil pressure precisely. This professional-grade kit brings shop-level pressure testing into any...

Devvicoo Valve Spring Compressor Tools is a portable steel kit that compresses and removes valve springs on OHV and OHC engines using six adapter sizes—without removing the cylinder head. If you service automotive engines or perform regular valve maintenance, this Devvicoo set is built...

DPTOOL Camshaft Timing Tool Kit is a complete, precision-engineered set designed to lock, align and hold components when servicing the 4.0L 4015CC SOHC 12V V6 engines found in Ford and Land Rover models from 2004–2010. When you're doing a timing job on a Ford...

Yuesstloo Engine Alignment Locking Timing Tool Kit is a complete steel set for aligning camshafts, marking pulse wheels, and removing/installing fuel injectors on compatible Mercedes-Benz engines. This compact kit combines four camshaft timing tools, camshaft adjusters, sleeves, fixing screws, a fuel injector puller and...

The Yoursme 000133 Torque Multiplier Tool is a compact leverage kit made to remove and install 36mm axle and flywheel nuts on classic VW models without extra muscle. Designed specifically for air-cooled Volkswagen vehicles from the 1940s through the 1970s, this torque multiplier saves...

Yuesstloo's Camshaft Alignment Locking Timing Tool Kit is a complete, workshop-grade set that secures and aligns camshafts and chain tensioners for 2.0L FSI/TFSI VW and Audi engines. This comprehensive kit bundles purpose-built alignment plates, locking pins, a chain tensioner retainer, and the specialist sockets...

The Yuesstloo Camshaft Alignment Timing Tool Kit is a complete, precision-engineered set that locks and aligns camshafts for BMW MINI engines N12–N18, enabling accurate timing work and cylinder head service. This professional timing tool kit was designed specifically for BMW MINI models (and compatible...

The Prokomon Exhaust Pipe Expander Tool is a heavy-duty kit that stretches mild-steel exhaust tubing from 2-3/8" up to 4-1/4" so you can create tight, leak-resistant joints when fitting smaller-diameter pipes. This professional-grade expander set combines a tempered alloy-steel mandrel with precision-machined 6061 aluminum...

Orion Motor Tech's 26-piece EA888 timing tool kit is a complete camshaft and crankshaft alignment solution for 1.8L and 2.0L EA888 engines in VW and Audi models. This professional-grade timing tool set is designed to accurately lock and set camshafts and the crankshaft on...

Reywoo Timing Tool Kit is a complete alignment and locking set designed to accurately position camshafts, crankshafts and valve springs on Ford 4.6L, 5.4L and 6.8L 2V/4V engines. When servicing timing chains, replacing tensioners, or performing head work on compatible Ford V8 and V10...

Bonbo's Crank Pulley Wrench Holder Kit combines a crank pulley remover, cam gear lock plate, and intake/exhaust cam sprocket wrench to safely hold and remove Subaru cam sprockets and crank pulleys for EJ and DOHC engines. This three-piece tool set is built for workshop...

DPTOOL Engine Timing Tool Kit is a complete, vehicle-specific set that locks and aligns camshafts and crankshafts for Ford 1.5T/1.6T/2.0T/2.3T Ecoboost, select Volvo T4/T5 and Land Rover/Jaguar 2.0 GTDi/Si4 engines. This professional-grade timing tool kit provides the fittings and locking pins required to safely...

DPTOOL EA888 1.8/2.0 TSi TFSi Engine Timing Tool Kit is a full professional set of alignment, locking, and installation tools designed to accurately time and service VW and Audi EA888 1.8/2.0 TSi/TFSi engines from 2006–2018. This DPTOOL kit gathers the specialized fixtures technicians need...

The Yuesstloo 59-piece harmonic balancer puller kit is a comprehensive removal and installation set designed to extract and install crankshaft pulleys, harmonic balancers, and steering wheels across a wide range of vehicles without harming engine components. This upgraded 59-piece kit bundles metric and standard...

DPTOOL Engine Timing Tool Kit is a complete camshaft and crankshaft locking set purpose-built to safely time BMW MINI Cooper engines N12, N13, N14, N16 and N18 during belt or chain service. If you're doing valve timing, replacing a timing belt or performing head...

Orion Motor Tech's OMT Exhaust Pipe Expander Tool Kit is a heavy-duty tube stretcher and collet set that expands exhaust tubing from 1-5/8" up to 4-1/4" for secure, leak-resistant joints. This professional-grade expander kit simplifies fitting, joining, and repairing exhaust pipes without costly welding...

Yuesstloo Camshaft Alignment Locking Timing Tool Kit is a complete steel toolkit designed to lock and align camshafts, set the crank sensor and balancer, and position the crankshaft at true TDC for a range of Ford, Volvo, Jaguar and Land Rover petrol engines. This...

GEAROLL's Camshaft Phaser Timing Chain Lock Tool Kit is a complete, portable timing tool set designed to lock cam phasers, hold camshafts and secure the crankshaft on Chrysler, Jeep, Dodge and VW 3.6L Pentastar V6 engines. This kit gathers every specialized tool needed to...

Yuesstloo Camshaft Timing Tool Kit is a purpose-built set for aligning and locking the camshaft and crankshaft on Ford 4.0L SOHC V6 chain-driven engines with variable valve timing. If you service or rebuild 4.0L Ford-derived engines — found in certain Ford Explorer, Ranger, Mustang,...

Yuesstloo Camshaft Phaser Timing Chain Tool Kit is a complete, vehicle-specific set for holding and locking camshaft phasers, timing chains, and the crankshaft pulley on 3.6L Pentastar V6 engines. This heavy-duty toolkit groups the essential fixtures technicians need to service camshaft phasers, loosen or...

DPTOOL 3.6 Pentastar Timing Tool Kit is a full, vehicle-specific set of camshaft phaser locks, chain holders and crankshaft tools designed to correctly secure timing components on 3.6L Pentastar V6 engines from 2011–2019. This professional-grade kit groups every specialized fixture needed to service timing...