Engine Tools

The Orion Motor Tech OMT Camshaft Timing Lock Tool Kit (303-1097) is a 10-piece professional engine timing and VCT alignment set designed to accurately lock and position dual-overhead-cam engines from Ford, Mazda and Volvo during timing belt or chain service. This precision kit gathers...

SMOTIVEPRO 8in Valve Spring Compressor is a heavy-duty, universal tool designed to compress, remove and install valve springs on small to medium overhead-valve engines quickly and securely. This compact, workshop-ready spring compressor fits a wide range of OHV petrol and diesel heads and delivers...

Yuesstloo Engine Camshaft Belt Timing Locking Tool Kit secures camshafts and crankshafts to hold a Ford engine at top dead center for accurate timing and service. This professional-grade timing kit bundles the essential locking pins, positioning plates, and a crankshaft absorber needed when removing...

DPTOOL 303-1248 is a specialist camshaft holding and timing alignment kit made to lock and position Ford 3.5L and 3.7L Cyclone V6 camshafts for accurate service work. If you need to service or replace timing components on Ford Edge, Explorer, F‑150, Fusion, Mustang or...

The Yuesstloo Turbo Engine Timing Tool Kit is a complete camshaft and crankshaft locking set engineered to hold timing components securely while you remove or replace timing chains on compatible Vauxhall, Opel and Chevy engines. This compact, workshop-ready kit groups the essential alignment plates,...

Orion Motor Tech’s OMT Turbo Engine Timing Tool Kit secures camshafts and sensors so you can set engine timing reliably on 1.0–1.4L Chevrolet, Opel and Vauxhall models. This professional-grade timing kit groups every alignment, locking, and adjustment tool needed to service timing chains and...

OEMTOOLS 27261 is a 5-piece alternator decoupler pulley tool kit designed to remove and install overriding decoupler (OAD) and one-way clutch (OWC) alternator pulleys on most popular vehicles. When you’re servicing alternators, the right puller and driver set saves time and prevents damage. The...

The Sunluway 522 is a heavy-duty large gear and pulley puller designed to remove gears, pulleys, and tapped-hole components quickly and safely. This puller is built to handle demanding shop and home-mechanic tasks where a robust, adjustable extractor is required. Modeled to match common...

Lisle 28100 is a 1/2" drive torque angle meter designed to measure rotational degrees for torque-to-yield fasteners with a universal fit and skin-pack packaging. This precision gauge lets technicians and DIYers add angle measurement to standard torque procedures, commonly used for head bolts and...

SMOTIVEPRO 4PCS Fan Clutch Removal Tool Kit is a professional-grade wrench set with 32/36/40/57mm sizes plus a 15-inch water pump pulley holder designed to remove stubborn fan clutch nuts on many Ford, BMW, GM, Dodge and Jeep engines. This compact toolkit eliminates guesswork when...

Sunluway's harmonic damper pulley holding tool locks the crankshaft pulley solidly in place so you can remove or torque the crank bolt on Toyota 3.4L V6 engines without the pulley turning. This precision-designed crankshaft holder is built specifically for Toyota 3.4L V6 applications—including Tacoma,...

DPTOOL's 15-piece tensioner and idler pulley removal kit is a compact, steel-built set engineered to access and release serpentine and timing-belt tensioners in tight engine bays. This all-in-one kit brings a curved tensioner wrench, a 48 mm adapter, ten hex and dodecagonal adapters, and...

BILITOOLS Turbo Engine Timing Tool Kit is a complete, OEM-equivalent set designed to lock, align, and tension camshafts and crankshafts on 1.0L, 1.2L and 1.4L Chevrolet and Vauxhall petrol engines. This kit gathers the specific locking plates, alignment discs, tensioner pins and crankshaft pins...

DAYDOOR 1.5 Timing Tool Kit is a complete camshaft, crankshaft and VCT locking set designed to correctly hold and align Ford Duratec, Duratorq, EcoBoost and compatible Mazda engines during timing-belt or chain service. This professional-grade timing tool kit gathers the essential locking pins, tensioner...

BILITOOLS 16PCS Pulley Holder Tool Set is an adjustable step-pin wrench kit designed to securely hold camshaft and crankshaft pulleys so you can remove or torque timing components safely and precisely. This compact kit brings together an adjustable two-piece pulley holder, eight step pins...

The OEMTOOLS 24687 Serpentine Belt Tool Set is an 8-piece kit built to release tensioners and swap serpentine belts quickly, even in cramped engine bays. This compact kit puts the right shapes and sizes at your fingertips for most modern belt systems. Each component...

The SUZUME Stubby Flex Head Ratcheting Wrench Set is an 8-piece metric kit (8–17mm) with a 90-tooth ratchet and 180° pivoting head designed for high-torque work in very tight spaces. This compact wrench set combines a micro-swing 90-tooth ratcheting mechanism with a 180° flex...

The OEMTOOLS 24434 is a purpose-built valve spring compressor that lets you compress and replace valve springs and retainers on 1991–2004 Ford 2-valve V8 engines without removing the cylinder head. This compact, heavy-duty tool is engineered to speed up valve service on compatible Ford,...

The Lisle 22100 is a purpose-built flywheel locking tool that secures the flywheel on 6.6L Duramax engines with Allison automatic transmissions so you can remove and reinstall the harmonic balancer quickly and safely. Designed for heavy-duty diesel pickups, this compact steel tool holds the...

The GDLIN Cylinder Leak Down Tester Kit is a complete dual-gauge compression and leak-detection toolset engineered to pinpoint piston ring, valve, head gasket and cylinder wall leakage in gasoline engines. If you service small automotive engines, lawn equipment, or high-revving performance motors, accurate leak...

The Jetuplusllc LS LT Heavy Duty Flywheel Flexplate Crank Holding Tool secures the crank for installing or removing balancers, flywheels and torque converters on GM LS engines. This precision aluminum holding tool is built for professional mechanics and home engine builders working with GM...

The Yuesstloo Camshaft Crankshaft Timing Belt Locking Tool Kit is a complete alignment set built to hold Volvo 5- and 6-cylinder engines at the correct timing positions during belt, pulley, and seal work. This professional-grade kit gathers the essential fixtures you need to lock...

Sunluway's GM 25264 harmonic balancer puller and LS installer set is a complete crank pulley removal and installation kit designed for 1997-up GM LS and LT V8 engines. This two-piece tool kit gives you a professional way to remove and install harmonic balancers and...

This two-piece E-cowlboy tool set holds camshaft pulleys and harmonic damper pulleys securely so you can remove and torque crank and cam bolts safely and accurately. If you’re replacing a timing belt, water pump, or removing cam and crankshaft bolts on many Toyota, Lexus,...

DAYUAN's 17-piece diesel engine compression tester kit is a complete diagnostic set with a 0–70 bar (0–1000 psi) gauge and nine glow-plug plus four injector adapters to measure compression on most diesel engines. This compact kit gives mechanics and DIYers a reliable way to...

SGT SUPER GARAGE TOOLS 15-piece Valve Spring Compressor Kit is a complete, metal-built set for compressing, removing, and installing valve springs and seals across cars, motorcycles, ATVs, and small engines. This compact kit bundles a lever compressor, C-clamp base, multiple extension screws, collet pushers,...

KAISAL Engine Oil Tester is a handheld diagnostic tool that measures engine oil transmittance and temperature to quickly indicate whether gasoline or diesel oil needs attention. Keep track of your vehicle's lubricant health without guesswork: this compact analyzer uses a photoelectric sensor and temperature...

The Yuesstloo Harmonic Balancer Puller Kit is an adjustable, heat-treated 3-jaw puller set designed to remove harmonic dampers and pulleys safely from a wide range of vehicle engines without removing the radiator. This upgraded puller kit gives mechanics and DIYers a more complete solution...

GEAROLL Harmonic Balancer Puller Installer Kit is an adjustable 3-jaw puller and installer set engineered to remove and install pressed-on harmonic dampers on a wide range of GM, Ford, Chrysler and other vehicle engines. This all-in-one kit brings the key components technicians and DIY...

VEVOR's Diesel Engine Compression Tester is an 18-piece kit with a 0–1000 psi gauge and multiple adapters for diagnosing compression across diesel cylinders in trucks, tractors, and equipment. This kit combines a large-diameter pressure gauge, 18 specialized adapters, and an extra-long hose to deliver...

Yuesstloo Camshaft Timing Belt Tool Kit is a complete, vehicle-specific set of alignment and locking tools designed to hold and set camshaft and crankshaft timing on Volkswagen and Audi 1.6/2.0 TDI engines. This kit gathers all the specialized fixtures and adapters technicians need to...

ISINSWIFT Camshaft Crankshaft Engine Timing Tool Kit (T10355) is a complete, hardened tool set designed to lock and align camshafts and crankshafts on EA888 1.8/2.0 TSi/TFSi engines for Audi, VW and related models from 2006–2018. Whether you are a professional tech or a confident...

DikTalk Timing Tool Set is a 21-piece engine locking and alignment kit designed to service EA888 1.8/2.0 TSI/TFSI engines across Gen1–Gen3, giving professional and home mechanics the correct pins and sockets to set camshafts, crankshafts and balance shafts securely. This toolkit consolidates the locking...

Rogierra's harmonic balancer puller is a clamp-in crank pulley removal and installation tool built for many GM LS engines and select Chrysler, Jeep, and Dodge V6/V8 applications. This heavy-duty puller is engineered to remove and install engine harmonic dampers without relying on threaded balancer...

XiTuanYuan's 2+1 Crankshaft Positioning with Camshaft Holding Tool Kit is a professional-grade timing alignment set that secures camshafts and locks the crankshaft for accurate timing chain, head gasket, and valve-train service on 1997–2002 Ford 4.6L, 5.4L V8 and 6.8L V10 engines. This heavy-duty kit...

Camoo engine barring flywheel turning tool kit is a two-piece steel set engineered to safely and accurately rotate the crankshaft and flywheel on Volvo and Mack diesel engines (1998–2018). This kit is designed for professional technicians and experienced DIYers who need a reliable tool...

GLEXQLAO 5460 Belt Tension Spring Compressor Tool is a forged carbon-steel specialty hand tool built to safely compress serpentine belt tensioner springs for drive belt, pulley, and alternator service. Replacing a drive belt or removing a tensioner pulley requires a reliable way to compress...

Bicos Diesel Engine Compression Tester Kit is a complete diagnostic set with a 0–1000 PSI gauge, release valve, flexible hose, and multiple glow plug and injector adapters for accurate cylinder pressure testing on diesel vehicles. When troubleshooting compression-related issues in diesel engines, reliable pressure...

WAYCOJOY Camshaft Timing Locking Tool is a precision-engineered kit that locks, aligns, and sets camshafts and crank timing for 2.0L and 2.3L EcoBoost engines compatible with OEM tools like 303-1594 and 303-1504. When you’re servicing timing components on modern Ford EcoBoost engines, accurate positioning...

The DISEN 14-piece compression tester kit is a complete gasoline-engine diagnostic set with a 0–300 PSI fluorescent gauge, five metal adapters, spark plug testers and a rugged carrying case for fast, accurate cylinder pressure checks. Whether you’re a backyard mechanic or a professional technician,...

OTC 4573 Universal Overhead Valve Spring Compressor is a compact, spring-loaded tool that safely compresses valve springs for removal or valve stem seal service on many cars, vans, and light trucks. The OTC 4573 is engineered for technicians who need a reliable, space-conscious way...

GEAROLL's 3163021 cam timing tool kit with the 7mm engine-brake adjustment gauge is a complete set for accurately setting cam gear timing and adjusting Jake brake screws on Cummins ISX, QSX and X15 engines. When working on 2007–2017 Cummins engines you need a reliable...

OEMTOOLS 37306 is a long‑reach harmonic balancer and pulley installer kit with four threaded rods and a heavy‑duty driving nut, built to fit many Ford, GM, Dodge and Chrysler V6/V8 engines. This installer set is engineered to simplify and safeguard the final step of...

The OTC 5911A Drain Plug Pro is a magnetic, flexible-shaft tool that holds and removes pre-loosened ferrous oil pan drain plugs so you can extract them safely without dropping them or putting your hand in the oil stream. The OTC Drain Plug Pro combines...

TradeINArt Multi-Function Cylinder Leak Down Tester Kit is a complete dual-gauge diagnostic set that measures compression pressure and percentage leak rate for gasoline engines quickly and reliably. This compact kit brings a professional-style leak-down and compression test capability to garages and home workshops. Built...

DPTOOL Engine Timing Tool Kit for Ford 2.0T/2.3T locks and aligns camshafts and crankshaft components so you can set engine timing accurately on compatible Ford, Jaguar and Land Rover petrol engines. This professional-grade timing kit is engineered for 2.0L Duratec and 2.0–2.3L EcoBoost engines...

Orion Motor Tech's OMT Engine Timing Tool Kit secures camshafts and crankshafts so you can accurately set and service timing on Ford and compatible Volvo EcoBoost engines. This comprehensive timing kit collects the essential locking, alignment and pulling tools needed when performing timing belt...

ZMCYNG 1.5/1.6 Timing Tool Kit is a complete camshaft, crankshaft and VTC alignment set built to lock and set timing on Ford and Mazda 1.4–2.0 engines accurately and reliably. This timing tool kit bundles the patterned pins, locking plates and tensioner guides needed to...

BETOOLL 15-piece compression tester kit is a complete automotive tool set that measures up to 300 PSI and includes a spark plug tester plus 14mm and 16mm magnetic swivel spark plug sockets for fast, reliable cylinder pressure checks. This professional-grade kit combines a clear...

The BILITOOLS 13-piece valve spring compressor set is a compact workshop kit that lets you compress valve springs, remove and install seals, and lap valves on cylinder heads removed from the engine. This all-in-one kit gathers a C-clamp compressor, multiple adapters, straight valve stem...